Lee Weiss's
Sample publications, patents, and posters/abstracts:
TISSUE
ENGINEERING & REGENERATIVE MEDICINE
- Bioprinting
Exosome-Based Extracellular Vesicle Microenvironments
Yerneni
SS, Whiteside TL, Weiss LE, Campbell PG, Bioprinting
Exosome-Based Extracellular Vesicle Microenvironments, Bioprinting,
13 e0004 (2019)
Download: pdf, copywrited
- Interleukin-10 Does Not Augment Osseous
Regneration in the Scarred Calvarial Defect Achieved with
Low-Dose Biopatterned BMP2
Brooker JE, Bryowski MR, Camison L, Yerneni S, Campbell PG,
Weiss L, Mooney MP, Cray JJ, Cooper GM, Losee JE, Plastic
and Reconstructive Surgery, 143(6), (2019) pp.
1215ee-1223e
- Reconstruction of a calvarial wound
complicated by infection; comparing the effects of
biopatterned Bone Morphogenetic Protein 2 and Vascular
Endothelial Growth Factor
Brooker JE, Camison LB, Bryowski MR, Hurley ET, Yerneni SS,
Campbell PG, Weiss LE, Mooney MP, Cray J, Gilbert JR, Cooper
GM, Losee JE, The Journal of Craniofacial Surgery,
30(1), (2019) pp.260-264
- A Design and Method of Manufacture of a
Microminiature Chainmail Interface Between Skin and
Transcutaneous Prosthetics
Weiss, L. and Fedder, G., 10,039,651
B2 (2018)
- Phase contrast time-lapse microscopy
datasets with automated and manual cell tracking
annotations
Ker DFE, Eom S, Sho S, Bise R, Pascale C, Yin Z, Huh S,
Osuna-Highley E, Junkers S, Helfrich C, Liang PY, Pan J, Jeong
S, Kang S, Liu J, Nicolson R, Sandbothe M, Van P, Liu A, Chen
M, Kanade T, Weiss L, and Campbell P, Nature -
Scientific Data, 5:180237 doi: 10.1038/sdata.2018.23,
2018
- Biopatterned
CTLA4/Fc Facilitates Local Immunomodulation,
Engraftment, and Glucose Homeostasis after Pancreatic
Islet Transplantation
Zhang W., Gorantla V, Campbell PG, Li Y, Yang Y,
Komatsu C, Washington KM, Weiss LE, Zheng XX, and Solari MG, Diabetes, 65(12),
(2016) pp. 3660-3666.
- Trasnforming growth factor beta 1 augments calvarial defect healing and
promotes suture regeneration
Shakir, S., Maclsaac,
Z.M., Naran, S., Smith, D.M., Bykowski, M.R., Cray, J.J., Craft,
T.K., Wang, D., Weiss, L., Campbell, P.G., Mooney, M.P., Losee J.E., and Cooper, G.M., Tissue
Engineering Part A , 21(5-6), 2015, pp. 939-47
Download: pdf, copywrited
- Inkjet-based biopatterning
of SDF-1β augments BMP-2-induced repair of critical size calvarial bone defects in mice
Herberg S., Kondrikova G. Periyasamy-Thandavan
S., Howie R. Nicole, Elsalanty
M.E., Weiss L., Campbell P., Hill W.D., and Cray J.J., Bone
67 (2014) 95-103
Download: pdf, copywrited
- Precise Control of Osteogenesis for
Craniofacial Defect Repair: The Role of Direct
Osteoprogenitor Contact in BMP-2-Based Bioprinting
Smith D., Cray J. Weiss, L., Ker E., Sameer
S., Rottgers S., Losee J., Campbell, P. and Cooper,
G., Annals of Plastic Surgery, 69 (4) (2012) pp. 485-88
Download: pdf, copywrited
- An Engineered Approach to Stem Cell Culture:
Automating the Decision Process for Real-Time Adaptive
Subculture of Stem Cells
Ker E., Weiss L., Junkers S., Chen M., Yin
Z., Sandbothe F., Huh S. Eon
S., Bise, R., Osuna-Highely E., Kanade
T., and Campbell P., PLoS
One, 6(11)
Download: pdf, copywrited
- Bioprinting of Growth Factors onto Aligned
Sub-micron Fibrous Scaffolds for Simultaneous Control of
Cell Differentiation and Alignment
Ker E., Nain A., Weiss, L., Wang J., Suhan J., Amon C., Campbell P., Biomaterials,
32 (2011) 8097-8107
Download: pdf, copywrited
- Engineering spatial control of multiple
differentiation fates within a stem cell population
Kerr E, Chu B,Gharaibeh
B, Huard J, Weiss L, Campbell P, Biomaterials, 32
(2011) 3412-3422
Download: pdf, copywrited
- Spatially directed guidance of stem cell
population migration by immobilized patterns of growth
factors
Miller E, Li K, Kanade
T. Walker L, Weiss L,Campbell
P, Biomaterials, 32 (2011) 2775-2785
Download: pdf, copywrited
- Inkjet-Based Biopatterning
of BMP-2 to Spatially Control Calvarial
Bone Formation
Cooper G, Miller E, DeCesare G, Usas A., Lensie
E, Bykowski M, Huard J, Weiss
L, Losee JE, Campbell P, Tissue Engineering Part A, Vol. 16, No. 5, 1749-59,
2010
Download: pdf,
copywrited
- Development of an Implantable Biodegradable
Electrical Stimulator for Bone Repair
Finamore B, Fedder G, Khairi
A, Paramesh J, Schultz L, Burgess J, Campbell P, Weiss, L, Biodmedical Engineering Society Fall
Metting, 2009
Download: Poster
- Inkjet Printing of Growth Factor
Concentration Gradients and Combinatorial Arrays
Immobilized on Biologically-Relevant Substrates
Miller E, Phillippi J, Fisher
G, Campbell P, Walker L, and Weiss, L., Combinatorial
Chemistry & High Throughput Screening, 12 (2009),
604-618
Download: pdf, copywrite
- Cell Population Tracking and Lineage
Construction with Spatiotemporal Context
Li, K., Chen, M. Kanade, T.,
Miller, E., Weiss, L., and Campbell, P. Medical Image
Analysis Journal, Vol. 12, No. 5 (2008) pp. 546-566
Download: pdf, copywrited
- Engineered Microenvironments Direct Stem Cell
Fate
Phillippi, J., Miller, E.,
Weiss, L., Huard, J., Waggoner, A., Campbell, P., Stem
Cells, 2007
Download: pdf, copywrited
- Tissue Engineering With The Aid of Inkjet
Printers
Campbell, P. and Weiss L., Expert Opinion on Biological
Therapy, 7(8), 2007, pp. 1123-1127.
Download: pdf, copywrited
- Method Of
Manufacturing Hydroxyapatite And Uses Thereof In Delivery
Of Nucleic Acids
Kumta, P., Sfeir,
C., Hollinger, J., Choi, D., Weiss, L.and
Campbell, P., U.S. Patent 7,247,288
(2007)
- Patterning of Multiple Cell Lineages from a
Single Stem Cell Population
Jadlowiec,
J.A., Miller, E.D., Huard, J., Weiss, L.E., Waggoner, A.,
Campbell, P.G., The American Society of Cell Biology,
December 9-13, 2006. San Diego, CA.
Download: Abstract, Poster
- Online Tracking of Migrating and
Proliferating Cells in Phase-Contrast Microscopy
Kang Li, Eric D. Miller, Lee E. Weiss, Phil G. Campbell,
Takeo Kanade, Proceedings
of the 2006 IEEE Conference on Computer Vision and Pattern
Recognition Workshop (CVPRW '06), June, 2006, pp. 65
- 72.
Download: pdf, copywrited
- Inkjet Deposition System With Computer
Vision-Based Calibration for Targeting Accuracy
(note: this is the system we use to jet 2D
spatial patterns of growth factors)
Weiss, L., Schultz, L., and Miller, E.,
Robotics Institute Technical Report, Robotics Institute
Technical Report, CMU-RI-TR-06-15V2, 2006
Download: pdf, copywrited
- Dose-Dependent Cell Growth in Response to
Concentration Modulated Patterns of FGF-2 Printed on
Fibrin
Miller, E.D., Fisher, G.W., Weiss, L.E., Walker, L., and
Campbell, P.G., Biomaterials, 27(10), 2213-2221,
2006
Download: pdf, copywrited
- Bayesian Computer-Aided Experimental Design
of Heterogeneous Scaffolds for Tissue Engineering
Weiss, L., Amon, C., Finger, S., Miller, E., Romero, D.Verdinnli, I., Walker, L.,
Campbell, P., Computer-Aided Design, 37: 1127-3,
2005
Download: pdf, copywrited
- Engineered Spatial Patterns of FGF-2
Immobilized on Fibrin Direct Cell Organization
Campbell, P, Miller, E., Walker, L, Fisher, G., and Weiss,
L., Biomaterials, 26(33), 6762-6770, 2005
Download: pdf, copywrited
- New Frontiers in Bone Tissue Engineering,
Clinics in Plastic Surgery
Calvert, J.W., Weiss, L.E., and Sundine,
M.J., 30, pp. 641-648, 2003
Download: pdf,copywrited
- Rabbit Calvarial
Wound Healing Using Seeded Caprotite
Scaffolds
Mooney, M., Calvert, J., Hollinger, J., Marra, K., Weiss, L., Campbell, P.,
Kumta, P., and Bidic, S., Journal of Dental
Research, 82(2):131-135, 2003
Download: pdf,copywrited
- Prototype Implemtation
of an Assembly System for Tissue Engineered Constructs
Reischmann, M., Merz, R.,
Schultz, L., and Weiss, L., Elektrotechnik
und Informationstechnik,
pp. 248-252, 2002
Download: pdf,copywrited
- Tissue Engineering: Solid Freeform
Fabrication of Scaffolds
Weiss, L., Science & Medicine, e.d. A. E. Meier, Vol. 8, No.1, pp.
6-7, 2002
Download: pdf,copywrited
- Characterization of Osteoblast-Like Behavior
of Cultured Bone Marrow Stromal Cells on Various Polymer
Surfaces
Jay W. Calvert, Kacey G. Marra,
Lisa Cook, Prashant N. Kumta,
Paul A. DiMilla, Lee E. Weiss,
J. Biomed. Mat. Res., Volume 52, Issue 2,
2000, pp. 279-284
Download: pdf,copywrited
- Assembled Scaffolds For
Three Dimensional Cell Culture And Tissue Regeneration
Weiss, L.E. and Szem, J., U.S Patent
6,143,293 (2000)
- Biocompatible Compositions and Methods of
Using Same
Marra, K.G.; Weiss, L.E.; Szem, J.W., and Kumta, P., U.S.
Patent 6,165,486 (2000)
- In Vitro Analysis of Biodegradable Polymer
Blend/Hydroxyapatite Composites for Bone Tissue
Engineering
Marra, K.G.; Szem, J.W.; Kumta,
P.N.; DiMilla, P.A.; Weiss,
L.E.; J. Biomed. Mat. Res., 1999, 47(3), 324-335
Download: pdf, copywrited
- Solid
Freeform Fabrication Processes
(see Envisioned 3D Bioprinting System from 1995)
Weiss, L.E.; NSF Workshop on Design Methodologies for
Solid Freeform Fabrication, June 1995. (See section
4.5.2, 'Heterogeneous Example' and Slide 20).
Download: pdf,
copywrited
BLOOD PLASMA-BASED
IMPLANTABLE PLASTICS
- A Plasma-Based, Amiodarone-Impregnated
Material Decreases Susceptibility to Atrial Fibrillation
in Post-Cardiac Surgery Model
Schwartzman, D., Badhwar, V., Kormos,
R., Smith, J., Campbell, P.,G, and Weiss, L., Innovations: Technolgy and Techniques in
Cardiothoracic and Vascular Surgery , 11(1), 2016,
p. 59-63
Download: pdf,copywrited
- Methods and apparatus for manufacturing plasma based plastics and
bioplastics produced therefrom
Campbell, P., Burgess, J., Weiss, L. and Smith, J.,
9,364,503
B2 U.S. Patent
(2016)
- An off-the-shelf plasma-based material to
prevent pacemaker pocket infection
Schwartzman, D., Pasculle,
W.A., Ceceris, K..D., Smith,
J.D., Weiss, L.E., and Campbell, P.G., Biomaterials, 60
( 2015) p. 1-8
Download: pdf,copywrited
- Methods and apparatus for manufacturing plasma based plastics and
bioplastics produced therefrom
Campbell, P., Burgess, J., Weiss, L. and Smith, J., U.S. Patent
8,911,789 B2 (2014)
- Methods and apparatus for manufacturing plasma based plastics and
bioplastics produced therefrom
Campbell, P., Burgess, J., Weiss, L. and Smith, J., U.S. Patent
8,529,961 B2 (2013)
- Methods and apparatus for manufacturing plasma based plastics and
bioplastics produced therefrom
Campbell, P., Burgess, J., Weiss, L. and Smith, J., U.S. Patent
8,529,960 B2 (2013)
- Methods and apparatus for manufacturing plasma based plastics and
bioplastics produced therefrom
Campbell, P., Burgess, J., Weiss, L.
and Smith, J., U.S.
Patent 8,529,959 B2 (2013)
- Methods and apparatus for manufacturing plasma based plastics and
bioplastics produced therefrom
Campbell, P., Burgess, J., Weiss, L. and Smith, J., U.S. Patent
8,529,958 B2 (2013)
- Methods and apparatus for manufacturing plasma based plastics and
bioplastics produced therefrom
Campbell, P., Burgess, J., Weiss, L. and Smith, J., U.S. Patent
8,529,956 B2 (2013)
- Methods and apparatus for manufacturing plasma based plastics and
bioplastics produced therefrom
Burgess, J., Campbell, P., Weiss,
L., Smith, J., U.S. Patent 8,293,530
B2 (2012)
- Biologically Active Blood Plasma-Based
Biomaterials as a New Paradigm for Tisue
Repair Therapies
Smith, J, Weiss, L., Burgess, J., West, A., and Campbell,
P., Disruptive Science and Technology 2012. 1(3):
p. 1-11
Download: pdf,copywrited
GAS
CHEMICAL SENSORS
- Robust gold nanoparticles stabilized by trithiols for application in chemiresistive sensors
Garg N., Mohanty A., Lazarus N., Schultz L.,
Rozzi T.R., Santhanam S.,
Weiss L., Snyder J.L., Fedder
G.F. , and Jin R., Nanotechnology 21 (2010) 405501 (6pp)
Download: pdf,copywrite
- Jetted Nanoparticle Chemical Sensor Circuits
for Respirator End-of-Service-Life Detection
G. K. Fedder, S. S. Bedair, N. Garg, J. Greenblatt, R. Jin, D. N. Lambeth, N. Lazarus, S.
Santhanam, L. Schultz, J. L. Snyder, L. E. Weiss, and J.
Wu., 12th International Meeting on Chemical Sensors,
July, 2008, Columbus, Ohio
Download: pdf,copywrite
- Polythiophene-Based Gas Chemical Sensors
for Detecting End-of-Service-Life of Respirator Filter
Cartridges,
Sarah Bedair, Jesscia Cooper, Gary Fedder, Mihaela Iovu, David N. Lambeth, Bo Li,
Rick McCullough, Suresh Santhanam, Genevieve Sauve, Larry Schultz, Jay Synder, Lee Weiss, John Wu, Quantum
Electronic Solids Program Review, Air Force Office
of Sponsored Reserch,
Pittsburgh, PA., Aug. 7-9, 2006
Download: Poster
- Inkjet Printed Chemical Sensor Array Based on
Polythiophene Conductive Polymers
Li, B., Santhanam, S., Schultz, L., Jeffries-EL, M., Iovu, M.C., Sauvé, G., Cooper, J.,
Zhang, R., Revelli, J., Kusne, A., Snyder, J., Kpwalewski, T., Weiss, L.,
McCullough, R.D., Fedder, G.,
and Lambeth, D., Sensors & Actuators B, Vol. 123, No. 2,
2007, pp. 651-60
Download: pdf,copywrited
- Volatile Organic Compound Detection Using
Nanostructured Copolymers
Li,B.,
Sauve´, G., Iovu, M., Jeffries-EL, M.,
Zhang, R., Cooper, J., Santhanam, S., Schultz, L., Revelli,| J., Kusne,
G., Kowalewski, T.,
Snyder, J., Weiss, L., Fedder,
G., McCullough, R., and Lambeth, D., Nano Letters,
6(8), 2006, pp. 1598-1602
Download: pdf, copywrited
- Inkjet Deposition System With Computer
Vision-Based Calibration for Targeting Accuracy
(note: this is the system we use to help
fabricate the sensors)
Weiss, L., Schultz, L., and Miller, E.,
Robotics Institute Technical Report, Robotics Institute
Technical Report, CMU-RI-TR-06-15V2, 2006
Download: pdf, copywrited
- Regioregular Polythiophene Nanowires and Sensors
R. D. McCullough, G. Sauvé, B. Li, M.
Jeffries-El, S. Santhanam, L. Schultz, R. Zhang, M. C. Iovu, J. Cooper, P. Sreedharan, J. C. Revelli, A. G. Kusne,
T. Kowalewski, J. L. Snyder, L.
E. Weiss, D. N. Lambeth and G. K. Fedder,
in Proc. of SPIE - The International Society for
Optical Engineering, Vol. 5940, Organic Field-Effect
Transistors IV, 2005, pp. 28-34 (Invited Paper)
Download: pdf,copywrited
- Volatile Organic Compound Discrimination
Using Nanostructured Polythiophene Sensors
Bo Li; Santhanam, S.; Schultz, L.;
Jeffries-EL, M.; Iovu, M.C.; Sauve, G.; Cooper, J.; Zhang, R.; Revelli, J.C.; Kusne,
A.G.; Kowalewski, T.; Weiss,
L.E.; McCullough, R.D.; Fedder,
G.K.; Lambeth, D.N.; Snyder, J.L., IEEE
4th International Conference on Sensors, Irvine, CA, 2005,
pp. 191-194
Download: pdf, copywrited
bioMEMS
- Design of a multi-axis implantable MEMS
sensor for intraosseous bone stress monitoring
F. Alfaro, L. Weiss, P. Campbell, M.Miller,
and G. Fedder, Journal of
Micromechanics and Microelectronics , Vol 19, No. 8
(August, 2009)
Download: pdf,copywrited
- Micromilling of Microbarbs
for Medical Implants
Filiz, S., Xie,
L., Weiss, L.E., and Ozdoganlar,
O.B., International Journal of Machine Tools and
.,Manufacture, 48(2008) 459-472
Download: pdf,copywrited
- Sensorized Biomimetic Scaffolds toward Universal Bionic
Interfaces
Gary
Fedder, Fernando Alfaro, Phil
Campbell, Prashant Kumta, Burak Ozdoganlar,
Lee Weiss, The National Academies Keck Futures
Initiative is accepting applications from researchers for
"Smart Prosthetics: Exploring Assistive Devices for the
Body and Mind, Nov. 9-11, Irvine, Calif.
Download: Abstract, Poster
- BioImplantable Bone Stress Sensor
J. F. Alfaro, L. Weiss, P. G. Campbell, M. C. Miller, C.
Heyward, J. S. Doctor and G. Fedder,
Proceedings of the 2005 IEEE Engineering in Medicine and
Biology 27th Annual Conference (EMBS '05), pp.
518-521, September 1-4, 2005, Shanghai, China.)
Download: pdf,copywrited
- Stent-Based Gene Therapy
M. D. Feldman, B. Sun, B. J. Koci,
C. C. Wu, J. R. Kneller, H. S. Borovetz,
S. Watkings, A. Nadeem, L. E.
Weiss, M. L. Reed, A. J. C. Smith, W. Rosenblum, Journal
of Long-Term Effects of Medical Implants 10(1-2),
47-68, 2000.
Download: pdf,copywrited
- Method and Apparatus for Drug and Gene
Delivery
Reed, M., Weiss, L., Feldman, M., and Wu, C., U.S.
Patent No. 6,197,013 (2000)
- Precision Geometry Scaffolding Using MEMS
Technology
M.P. Stout, K.J. Gabirel,
L.E. Weiss and P. Campbell
Cells Tissues Organs 2000;166:79-82
Download: pdf,copywrited
- The Use of Microfabricated Probes to
Penetrate the Internal Elastic Lamina and Intimal
Hyperplasia
J. R. Kneller, C. C. Wu, D. A. Vorp,
M. L. Reed, L. E. Weiss, H. S. Borovetz,
S. Watkins, M. D. Feldman, Journal of Cardiovascular
Diagnosis and Procedures 16(2), 37-50, 1999
Download: pdf,copywrited
- Micromechanical Devices for Intravascular
Drug Delivery
M. L. Reed, C. C. Wu, J. R. Kneller, S. Watkins, D. A. Vorp, A. Nadeem, L. E. Weiss, K.
Rebello, M. Mescher, A. J. C.
Smith, W. Rosenblum, M. D. Feldman, Journal of
Pharmaceutical Sciences 87(11), 1387 - 1394, 1998.
Download: pdf,copywrited
- Microfabricated Device for Arterial Wall and
Atherosclerotic Plaque Penetration
J. R. Kneller, C. C. Wu, S. Watkins, A. Nadeem, M. Reed, L.
Weiss, M. D. Feldman, IEEE Engineering in Medicine and
Biology Conference, Chicago, Il., 1997, 2277-2280.
Download: pdf, copywrited
- Tissue Connective Devices With Micromechanical Barbs
Reed, M. and Weiss, L., U.S. Patent 5,569,272
(1996)
- Robotics: New Technologies and Applications
Kanade, T., Reed, M. and Weiss,
L., Communications of the ACM, Vol. 37, No. 3,
March 1994
Download: pdf,copywrited
- Micromechanical Barb And
Method For Making The Same
Reed, M. and Weiss, L., U.S.
Patent 5,312,456 (1994).
- Silicon Micro-Velcro
Reed, M.L., Han, H. and Weiss, L., Advanced Materials,
Vol. 4, pp. 48-51, 1992.
Download: pdf, copywrited
- Micromechanical Velcro
Han H., Weiss, L.E., and Reed, M. L., IEEE Journal of
Microelectromechanical Systems, Vol. 1, No. 1,
pp. 37-43, 1992
Download: pdf, copywrited
- A Mechanical Surface Adhesive Using
Micromachined Silicon Structures
Han H., Reed, M. L., and Weiss, L., “,” Journal of
Micromechanics and Microengineering, No. 1, 1991.
Download: pdf, copywrited
- Fabrication And Testing Of A Microdynamic Rotor For Blood Flow
Measurements
Rapoport, S. D., Reed, M. L., and Weiss, L. E., Journal
of Micromechanics and Microengineering, No. 1, 1991.
Download: pdf, copywrited
- Mating and Piercing Micromechanical
Structures for Surface Bonding Applications
Han, H., Weiss, L. E., and Reed, M., Fourth IEEE
Workshop on Micromechanical Systems, Nara, Japan,
Jan. pp. 253-258, 1991.
Download: pdf, copywrited
RAPID PROTOTYING (Overviews)
- Processes Overview: In JTEC/WTEC Panel Report
on Rapid Prototyping in Europe and Japan
Weiss, L.E., F.B.,Prinz, ed. 1997 Vol. I.
Analytical chapters. Baltimore, MD: Loyla
College
Download: pdf, copywrited
- Layered Manufacturing: Current Status and
Future Trends
Dutta, D., Prinz, F., Rosen, D. and Weiss, Trans. ASME
JCISE, Vol. 1, No. 1, pp. 60-71, 2001
Download: pdf, copywrited
- Solid Freeform Fabrication: A New
Manufacturing Paradigm
Richard H. Crawford, Joseph J. Beaman, Christopher Cavello, Jerry D. Jackson, Lee E.
Weiss, and Carlo H. Séquin,
IEEE Spectrum, Vol. 36, No. 2, (1999) pp. 34-43
Download: pdf, copywrited
- Robotics: New Technologies and Applications
Kanade, T., Reed, M. and Weiss,
L., Communications of the ACM, Vol. 37, No. 3,
March 1994
Download: pdf, copywrited
- Rapid Prototyping from 3D Scanned Data
Through Automatic Surface and Solid Generation
Choi, Y., Gursoz, E. Levent, Weiss, L. E., and Prinz, F.
B., ASME Winter Annual Meeting, DE-Vol. (29) pp. 17-23, 1990
Download: pdf, copywrited
SHAPE
DEPOSITION MANUFACTURING
- Layered Manufacturing with Embedded
Components: Process Planning Considerations
Cham, J.G., Pruitt, B.L., Cutcosky, M.R., Binnard, M., Weiss, L.E., and Neplotnik, G., Proceedings
of DETC99: 1999 ASEM Design Engineering Technical
Conference, Sept, 1999, Las
Vegas, NV
Download: pdf,copywrited
- Novel Applications and Implementations of
Shape Deposition Manufacturing
Weiss, L. and Prinz, F. Naval Research Reviews, Office of
Naval Research, Three/1998, pp. 19-26, Vol. L
Download: pdf,copywrited
- Shape Deposition Manufacturing with Microcasting: Processing, Thermal
and Mechanical Issues
Amon, C.H., Beuth, J.L., Merz,
R., Prinz, F.B. and Weiss, L.E., Journal of Manufacturing
Science and Engineering, Vol. 120, No. 3, 1998, pp. 656-502.
Download: pdf, copywrited
- Shape Deposition Manufacturing With Microcasting
Amon, C, Finger, S., Merz, R., Prinz, F., Schmalz, K., and Weiss, L., ASME
Journal of the Japan Welding Society, Vol.66, No. 4, June,
1997, pp. 64-69.
Download: pdf, copywrited
- Investigation of Transport Phenomena in Microcasting Shape Deposition
Manufacturing via Experiments Designed using Optimal
Sampling
Schmaltz, K., Leoni, N., Padmanabhan, P., Amon, C., Finger,
S., and Weiss, L., HTD-Vol. 347, ASME National Heat
Transfer Conerence,
Volume 9, Baltomire, Marlyand, August, 1997, pp. 241-250
Download: pdf,
copywrited
- Shape Deposition Manufacturing of
Heterogeneous Structures
L.E. Weiss, R. Merz, F.B. Prinz, G. Neplotnik,
P. Padmanabhan, L. Schultz, K. Ramaswami,
SME Journal of Manufacturing Systems, Vol. 16, No.
4, pp. 239-248, 1997
Download: pdf, copywrited
- Reflections on a Concurrent Design
Methodology: A Case Study in Wearable Computer Design
Finger, S., Stivoric, J., Amon,
C., Gursoz, L., Prinz, F., Siewiorek, D., Smailagic,
A. and Weiss, L., Computer-Aided Design, special
issue on Concurrent Design, vol. 28, no. 5, 1996
Download: pdf, copywrited
- Rapid Design and Manufacture of Wearable
Computers
Finger, S., Terk, M., Subrahmanian, E., Kasabach, C., Prinz, F., Siewiorek, D.P., Smailagic, A., Stivorek,
J. and Weiss, L., Communications of the ACM, Vol.
39, No. 2, Feb. 1996
Download: pdf,copywrited
- Method and Support for Creation of Objects by
Layer Deposition
Weiss, L.E. and Prinz, F.B., U.S.
Patent No. 5,286,573 (1994).
- Method For
Fabrication of Three Dimensional Articles
Prinz, F.B. and Weiss, L.E., U.S.
Patent No. 5,301,415 (1994)
- Automated System For
Forming Objects By Incremental Buildup of Layers
Weiss, L.E. and Prinz, F.B., U.S.
Patent No. 5,301,863 (1994).
- Method and Apparatus for Depositing Molten
Metal
Merz, R., Prinz, F.B., and Weiss, L.E., U.S.
Patent No. 5,281,789 (1994)
- Modeling of Novel Manufacturing Processes
Amon, C., Finger, S., Prinz, F., and Weiss, L., Manufacturing
Science and Engineering (1994), American Society of
Mechanical Engineers, New York, NY, pp. 535-546, Nov. 1994.
Download: pdf, copywrited
THERMAL
SPRAY SHAPE DEPOSITION
- Method and Apparatus for Depositing Molten
Metal
Merz, R., Prinz, F.B., and Weiss, L.E., U.S.
Patent No. 5,281,789 (1994).
- Smart Coatings
Fasching, M., Prinz, F., and Weiss, L., ASM Journal of
Thermal Spray Technology, Vol. 4, No. 2., pp.
133-136, 1995
Download: pdf, copywrited
- Electronic Packages And
Smart Structures Formed By Thermal Spray Deposition
Prinz, F.B., Weiss, L.E., and Siewiorek,
D.P., U.S.
Patent No. 5,278,442 (1994).
- Robotic-Assisted Shape Deposition
Manufacturing
Hartman, K., Krishman,
R., Merz, R., Neplotnik,
G., Prinz, F.B., Schultz, L., Terk,
M., and Weiss, L.E., 1994 IEEE International Conference on
Robotics and Automation, San Diego, pp. 2890-2995, May, 1994
Download: pdf, copywrited
- Method And
Apparatus For Fabrication Of Three Dimensional Articles By
Spray Deposition
Weiss, L. E. and Prinz, F. B., U.S.
Patent No. 5,126,529 (1990)
- Thermal Spray Shape Deposition
Weiss, L.E., Prinz, F.B., Adams, D. and Siewiorek, D., ASM Journal of
Thermal Spray Technology, Vol. 1, No. 3, 1992
Download: pdf, copywrited
.
- Method And
Apparatus For Fabrication Of Three Dimensional Articles By
Spray Deposition Using Masks As Support Structures
Prinz, F. B., Weiss, L. E., and Adams, D., U.S.
Patent No. 5,203,944 (1992).
- Method And
Apparatus For Fabrication Of Three-Dimensional Metal
Articles By Weld Deposition
Prinz, F.B. and Weiss, L.E., U.S.
Patent 5,207,371 (1991)
- A Framework For
Thermal Spray Shape Deposition: The MD* System
Weiss, L. E., Prinz, F. B. and Siewiorek, D., Solid Freeform
Fabrication Symposium, The University of Texas At Austin,
August, 1991.
Download: pdf, copywrited
RAPID
TOOLING
- Arc Sprayed Steel-Faced Tooling
Weiss, L. Thuel, D., Schultz,
L. and Prinz, F.B., ASM Journal of Thermal Spray
Technology, Vol. 3, No. 3, pp. 275-281, 1994.
Download: pdf, copywrited
- Economic Analysis of Robotic
Operations: A Case Study of a Thermal Spraying Robot
Kutay,
A. and Weiss, L. E., Robotics and Computer Integrated
Manufacturing, Vol. 9, No. 4, 1992.
- Download:
pdf, copywrited
- Rapid Tool Manufacturing
Weiss, L.E. and Prinz, F.B., U.S.
Patent 5,189,781 (1992)
- A 3d-Object Reconstruction System Integrating
Range-Image Processing and Rapid Prototyping
Cerrada,
C., Ikeuchi, K., Weiss, L. and
Reddy, R., In Engineering Systems with Intelligence,
Microprocessor-Based and Intelligent Systems Engineering,
Vol. 9, pp 333-340 (1991)
Download: pdf, copywrited
- A Sprayed Steel Tool for Permanent Mold
Casting of Aluminum
Fussell, P.S, Patrick, E.P.,
Prinz, F.B., Schultz, L., Thuel,
D.G., Weiss, L.E., Kirchner, H.O., The Engineering Design
Research Center, Technical Report, EDRC-24-42-91
Download: pdf, copywrited
- Controlled Microstructure of Arc Sprayed
Metal Shells
Fussell, P.S, Kirchner O.K..,
Prinz, F.B., and Weiss, L.E. The Engineering Design Research
Center, Technical Report, EDRC-24-57-91
Download: pdf, copywrited
- Economic Impact of Automation: The Case of
Robotic Thermal Spraying
Kutay A. and Weiss, L., The
Robotics Institute Technical Report, CMU-RI-TR-90-07
Download: pdf, copywrited
- A 3D-Object Recognition System Intergrating Range-Image
Processing and Rapid Prototyping
Cerrada, C., Ikeuchi, K., Weiss, L. and Reddy,
R., The Robotics Institute Technical Report, CMU-RI-TR-90-32
Download: pdf, copywrited
- A Rapid Tool Manufacturing System Based On
Stereolithography and Thermal Spraying
Weiss, L. E., Gursoz, E.L.,
Prinz, F.B., Fussell, P.S.,
Mahalingam, S., and Patrick, E.P., ASME Manufacturing
Review, 3(1), pp. 40-48, 1990.
Download: pdf, copywrited
- Rapid Prototyping of Tools
L. Weiss, E.L. Gurosz,
F.B. Prinz, S. Mahalingham, and
P.S. Fussell, Robotics Institite Technical Report,
CMU-RI-TR-89-25, 1989
Download: pdf, copywrited
COMPUTER-AIDED
SURGERY
- Computer Aided Orthopedic Surgery
N. Krause, L. Weiss, K. Shimada, and T. Kanade, U.S.
Patent No. 6,711,432 (2004)
- Computer-Aided Bone Distraction
Krause, N. Mendicino, R.,
Shimada, K., Weiss, L, and Kanade,
T., U.S.
Patent No. 6,701,174 (2004) and U.S. Patent No.
7,837,621
STRUCTED
HUGHLIGHT INSPECTION
- Solder Joint Inspection System and Method
Nayar, S.K., Weiss, L.E., and
Sanderson, A.C., U. S. Patent No. 4,988,202
(1991).
- Structured Highlight Inspection Using
Structed Highlighht and
Gaussian Images
Nayar, S. K., Sanderson, A. C.,
Weiss, L. E., and Simon, D. A., IEEE Journal of
Robotics and Automation, Vol. 6., No. 2, pp. 208-218,
1990
Download: pdf, copywrited
- Fiber Optic Inspection System
Weiss, L.E., Sanderson, A.C., and Nayar,
S.K., U.S.
Patent No. 4,876,455 (1989).
- Structured Highlight Inspection of Specular
Surfaces
Sanderson, A. C., Weiss, L. E., and Nayar,
S. K., IEEE Trans. Pattern Analysis and Machine
Intelligence, Vol. 10, No. 1., pp. 44-55, 1988.
Download: pdf, copywrited
VISUAL
SERVOING
& ADAPTIVE CONTROL,
- Dynamic Visual Servo Control Of Robots
Weiss, L. E., Sanderson, A. C., and Neuman C. P., IEEE
Journal on Robotics and Automation, Vol. RA-3, No.
5., October 1987, pp. 404-417
Download: pdf, copywrited
- Self-Tuning of Robot Program Parameters
Weiss, L. E., Simon, D. A., and Sanderson, A. C.,The
Fifth Yale Conference on Applications of Adaptive Systems
Theory, May, 1987.
Download: pdf, copywrited
- Adaptive Control of Robots Using Visual
Feedback
Weiss, L. E., Sanderson, A. C., Neuman, C.P., Proceedings
International Federation of Automatic Control, pp. 491-501,
Barcelona, Spain, Nov. 1985.
Download: pdf, copywrited
- Dynamic Sensor-Based Control of Robots with
Visual Feedback
Weiss, L. E. and Sanderson, A. C., Proceedings IEEE Workshop
on Intelligent Control,
Rensselaer Polytechnic Institute, August, 1985.
Download: pdf, copywrited
- PhD Thesis: Dynamic Visual Servo Control of
Robots: An Adaptive Image-Based Approach
Weiss, L., In The Robotics Institute Technical Report,
CMU-RI-TR-84-16
Download: pdf, copywrited
FLEXIBLE ASSEMBLY
- Servo Robot Gripper
Zaremsky, M., Weiss, L.E., and
Mutschler, T.A., U.S. Patent No. 4,579,380
(1986).
- Multi-Lead Component Manipulator
Mutschler, T.A., Sanderson, A.C., and Weiss, L.E., U.S.
Patent No. 4,472,668 (1984).
MISCELLANEOUS
- Multi-Functional Rotary Dial Input Device for
Portable Computers
Weiss, L., Stivoric, J., Neplotnik, G., Cape, S., and Kasabach, C., U.S.
Patent 6,225,980 (2001)
- Epicardial Heart Lead Assembly
Weiss, L.E. and Dalton, M., U.S.
Patent No. 4,299,239 (1980)
- Epicardial Heart Lead Assembly and Method for
Optimal Fixation of Same for Cardia Pacing
Weiss, L.E., U.S.
Patent No. 4,235,246 (1980).
COPYWRITE
NOTICE. The downloadable publications on this web
site are presented to ensure timely dissemination of scholarly
and technical work. Copyright and all rights therein are
retained by authors or by other copyright holders. All persons
copying this information are expected to adhere to the terms and
constraints invoked by each author's copyright. These works may
not be reposted without the explicit permission of the copyright
holder.