[Date Prev][Date Next] [Chronological] [Thread] [Top]

RE: AVTS Accumulation Audit Log

Tab, yes, it needs to print on the R-6 internal printer and should also
print to the internal log.  It definitely needs to print to the internal
printer.  4.1.11 is what was presented to Texas for certification.  They
require ITA certification.  Could we not make a for Texas since
they are the only state that requires this.  Hopefully Texas would be ok
with this since ITA does not require this feature, and does not test for
this feature.

-----Original Message-----
From: owner-rcr@gesn.com [mailto:owner-rcr@gesn.com]On Behalf Of Talbot
Sent: Friday, May 31, 2002 9:30 AM
To: rcr@gesn.com
Subject: Re: AVTS Accumulation Audit Log


    Do you mean by "Log" that it needs to actually print the entry on the
internal printer or just record it in the internal log?

    Also what do you mean by "this must work with the 4.1.11 firmware"?  If
we make any changes to the software then by definition it is not 4.1.11.


----- Original Message -----
From: "Don Vopalensky" <don@gesn.com>
To: <rcr@gesn.com>
Sent: Friday, May 31, 2002 10:07 AM
Subject: AVTS Accumulation Audit Log

> Jurisdiction:  Texas Certification
> Date requested:  May 29, 2002
> Date needed:  August 15, 2002
> When using a AVTS to do accumulation in the precinct, that AVTS must log
> poll worker actions and messages that have taken place on that
> unit.  This must work with the 4.1.11 firmware.