[Date Prev][Date Next] [Chronological] [Thread] [Top]

RE: R-6 download



Do the math.  How much information (with audio files) is being pumped
through a serial port and at what speed?  Theoretically, how long should the
transfer take?

Steve Ricke was commenting in a meeting this morning that a VIBS download
through the serial port took as long as 15 minutes.

Ian

-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf
Of Rodney D Turner
Sent: June 04, 2001 11:23 AM
To: bugtrack@dieboldes.com
Subject: RE: R-6 download


Thanks Tab...but I had already tried that and it did not work.

Rodney D. Turner

-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf
Of Talbot Iredale
Sent: Monday, June 04, 2001 11:25 AM
To: bugtrack@dieboldes.com
Subject: Re: R-6 download


Rodney,

    This is not a bug.

    I do not know what baud rate you were using but you can increase the
baud rate to 115200.  To do this on your WinNT system go to control panel
and select Modem and then select the connection you are using and then
select Properties and change the baud rate to 115200.  Then on the AccuTouch
R6 unit in the Transfer Dialog select Change and then Advanced and change
the baud rate to match.

Tab

----- Original Message -----
From: "Rodney D Turner" <rodney@dieboldes.com>
To: <bugtrack@dieboldes.com>
Sent: Monday, June 04, 2001 7:19 AM
Subject: R-6 download


> I am using GEMS 1-17-13 and BS 4.1.0.0.
>
> When I attempt to download an election with audio files, it takes about 5
> minutes for the download to complete, and that was with just half of the
> audio files entered. Upload is OK.
>
>
> On 5 June 2001 (TUES) I have to demonstrate the download and upload
> capability of the R-6 to
> Travis County (Austin, TX). I think five minutes is a bit to long for a
> download. Is there any way we could shorten that time to 10 seconds or so.
>
> Rodney D. Turner
> Global Elections Systems
> rodney@dieboldes.com