[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: Booths for AV-TS R6 Units



Why not announce the correct length and type of screw and buy some at Home Depot? 
----- Original Message -----
Sent: Friday, February 01, 2002 5:40 PM
Subject: Booths for AV-TS R6 Units

To all with R6 booths:
 
There have been reports from Steve Knecht (Marin, CA) and Robert Pickett (Sales Rep, NC) that the existing screws on the feet of the R6 unit are too short to accommodate the thickness of the metal booth mounting brackets.  Diebold engineering (Canton, OH) is investigating this issue and will determine an effective solution.  In the meantime, the R6 units can be placed into the booths without securing them so as to allow operation for early voting requirements.  Please exercise caution that the R6 unit is transported separately from the booth until it can be secured with the proper fasteners.
 
Sincerely,
 
Ian S. Piper
Diebold Election Systems, Inc.