[Date Prev][Date Next]
RE: Ballot Station 4.3.11 Fatal Error Message
I am going to cross my fingers and if it does appear in the field, I will
get them to turn off and turn back on the AVTS.
From: firstname.lastname@example.org [mailto:email@example.com]On
Behalf Of Talbot Iredale
Sent: Friday, October 25, 2002 1:46 PM
Subject: Re: Ballot Station 4.3.11 Fatal Error Message
----- Original Message -----
From: "Robert Chen" <firstname.lastname@example.org>
Sent: Thursday, October 24, 2002 5:48 PM
Subject: Ballot Station 4.3.11 Fatal Error Message
> This message came up on one of our early voting AVTS units running BS
> "Fatal Error: Failed to set registry entry EnableDHCP. System will
> Pressing "OK" on the dialogue window, shuts down the AVTS unit but the
> message reappears when the unit restarts. We turned off the unit and so
> (4 hours) the message has not returned.
I assume you mean after turning the unit on again?
> Why does the message appear?
I cannot find anywhere in the source code that could create this message,
nor do I know why this would happen.
In theory the only time the EnableDHCP registry is accessed is when a new
NIC card is inserted or when you run the network control panel and change
> This unit is an early voting unit and is one of the units I have run
> extensive tests on. I have probably used it before, with a PCMCIA NIC
> so I can accept it if the answer to my question is that I have stuck a NIC
> card into that machine.
> It is a bigger problem though, if all of our 4000 AVTS units have the
> possibility of getting that message on the election day, in the field.
> Take care,
> rob chen