[Date Prev][Date Next] [Chronological] [Thread] [Top]

RE: WinCE 3.00 June 7th Release



I've got a couple of units in McKinney with which I was going to run some further installation tests.  I can give that configuration a try as well.
 
Ian
-----Original Message-----
From: owner-support@gesn.com [mailto:owner-support@gesn.com]On Behalf Of Ken Clark
Sent: Friday, June 14, 2002 1:16 PM
To: support@gesn.com
Subject: RE: WinCE 3.00 June 7th Release

What happens if you put the epboot.nb0 file on the PCMCIA card with the fboot.nb0 and nk.bin file?

 

Ken

 

-----Original Message-----
From: owner-support@gesn.com [mailto:owner-support@gesn.com] On Behalf Of Talbot Iredale
Sent:
Friday, June 14, 2002 9:11 AM
To: support@gesn.com
Subject: Re: WinCE 3.00 June 7th Release

 

The epboot.nb0 file is used to create the EPROMS which are used during initialial production.  I have included these in the zip file so all the files for this release are kept together.


Tab

----- Original Message -----

From: Ken Clark

Sent: Friday, June 14, 2002 11:05 AM

Subject: RE: WinCE 3.00 June 7th Release

 

What is the epboot.nb0 file?  Why don’t we need it?  Why would we need it?  How is it different from the fboot.nb0 file?

 

Ken

 

 

-----Original Message-----
From: owner-sw-announce@gesn.com [mailto:owner-sw-announce@gesn.com] On Behalf Of Talbot Iredale
Sent:
Thursday, June 13, 2002 3:57 PM
To: Software Announcements
Subject: WinCE 3.00 June 7th Release

 

The new WinCE 3.00 and bootloader are on the ftp site.  The file is WCE300-020607.zip and the password is "idns84jdb712f".

 

Note: Coy the fboot.nb0 and nk.bin files to a pcmcia card and install in the bottom slot of the AVTS unit and the turn the system on. You do not need the epboot.nb0 file.

 

Tab