[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: AV Server 1 COM Ports



That's a question for someone more technical than I.  I'm sure someone else
can respond to this.
----- Original Message -----
From: Mark S Earley <meglobal@earthlink.net>
To: <support@gesn.com>
Sent: Friday, January 04, 2002 6:31 PM
Subject: Re: AV Server 1 COM Ports


> Thanks Steve. Somehow I never picked up on that before.
>
> Any problems with setting the S19 register to 1? This resets the modem to
> Waiting For Call after 1 minute of inactivity. I tried it and it works
> better than leaving the line hanging indefinitely.
>
> I'm a little worried it may interfere with some kind of delayed up or down
> load, or modem usage outside of GEMS.
>
> Mark
> At 1/4/2002 08:53 PM, you wrote:
> >Mark,
> >As far as I know that sounds like the "common behavior".  That is the
modem
> >in the field does not "hang up" until they power off the AccuVote in the
> >field.   Whether there are better methods or not I don't know, but that
is
> >what we "train" for.
> >----- Original Message -----
> >From: Mark S Earley <meglobal@earthlink.net>
> >To: <support@gesn.com>
> >Sent: Friday, January 04, 2002 1:36 PM
> >Subject: AV Server 1 COM Ports
> >
> >
> > > While performing test uploads from AVOS units to AV Server 1, COM
Ports
> > > do not reset until AVOS unit is powered OFF or port is cycled thru
> > > STOP/START. Is this normal, or is there some setting that can correct
> > > this?
> > >
> > > I found that setting modem S register S19=1 will put the COM Port back
> > > to "Waiting For Call" status after 1 minute. Is there any hidden
problem
> > > with this?
> > >
> > > Mark
> > > Mark S Earley
> > > Support Services Specialist
> > > Global Election Systems
> > > office: 850 422-2100
> > > cell: 850 322-3226
> > >
>
>