[Date Prev][Date Next]
RE: AVTS 4.0.4 - Record/Playback Feature
ballots, and still going strong!!!!
Thanks Jeff, this
is good. You say it does not break at any consistent point. Do you
mean it can stop in a different place for a given test script, or that it
varies in an unpredictable way from test-to-test?
One thing to do
just to get ahead of the curve a little would be to create a "working" test
with a huge repeat and let that run this weekend. This will at least let
me know if we have a leak to fix in addition to our playback issues. The
ballot station operates largely the same whether the test is with one ballot
I will try to come
up with a way for you to vary the repeat as part of fixing
I am back
to trying the Record/Playback Feature. I have made up several
different scripts with 6 ballots. The first script runs all 6 ballots
only 1 time through, and this works fine. I have tried 2 other scripts
of 6 ballots, 1 with a repeat of 15, and another with a repeat of 90.
Both have failed, the 15 repeat stops after the 3rd ballot, and the 90
repeat stops at the summary page of the 2nd ballot.
can see from the thread below, I did the 1 ballot test with a repeat of 16
and that worked fine. It seems to be a combination of number of
ballots & number of loops. However, it does not break at any
If I were
able to create 1 script, and then able to change the number of loops,
without having to record the script again, I might be able to narrow it down
a bit, but either way there is a problem of some
guess is that it is a fixed buffer. It will work right up to 6, any
repeat. Would that be sufficient for now?
a 1 ballot test with a repeat of 16. This works fine. I will
keep continuing to increase the number of ballots until I can get it to
the same result, or does it fail at different points? If you
limit your test to say 6 or 7 ballots, does it then work
have tried it 4 times, all with the same result.
As soon as I get my laptop to be able to
recognize the PCMCIA card, I will send it to
it, then send me both scripts if it doesn't work the second
created a script for voting 8 different ballots, each ballot
contains 5 pages, and I have set it up to repeat 64 times.
However, when the script gets to the 7th ballot, it skips voting
on the the 3rd page, and then when it gets to the final Summary
Page it just stays there until you press the F3 key to stop
After I recorded the script, I
printed out a report to make sure that I had voted every ballot
correctly, and the report was correct.
suggestions??? This is the script that we will need to run
for the Wyle volume test.