[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: BallotStation 4.0.11 end election/Administrator card removal

This problem is not related to the removing Admin card problem.  This problem occurs when the storage space is full and a new memory card is inserted.
 
This is fixed and will be in BS 4.0.12 and 4.1.2.
 
Tab
----- Original Message -----
Sent: Thursday, October 11, 2001 12:22 AM
Subject: FW: BallotStation 4.0.11 end election/Administrator card removal

The error described below occured with an absentee PCMCIA card.  At a later point in processing, it turns out that the installation of any election media in the machine in question other than the absentee PCMCIA card gives rise to the message:
The following error has been detected
Exception in BallotStation
Failed to create \FFX\AccuVote-TS\BallotStation\CurrentElection
This error message does not appear when the absentee election media is re-installed.
 
Nel
-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Nel Finberg
Sent: Wednesday, October 10, 2001 5:58 AM
To: Bug Track
Subject: BallotStation 4.0.11 end election/Administrator card removal

An election is ended, then the election results report is printed.  The Administrator card is removed while the report is printing.  The report stops printing as the message 'Printing Aborted' is displayed.  Click on OK, then the Post-Election Mode window is displayed.
 
Posted in the course of Phase II GEMS 1-17-16/BallotStation 4.0.11 Florida certification.
 
Nel