[Date Prev][Date Next] [Chronological] [Thread] [Top]

RE: Burning PCMCIA cards with Laptop + Win 2000



Ok, If I initiate a direct download from GEMS to the R6 unit, everything works according to plan ie: Download election (packed) to the card, then remove the card, place it in another R6, that R6 then unpacks the election, and loads it properly. 
Mike
 
Mike Brown
1611 Wilmeth Road,
McKinney, T.X.
75069
PH: 972.542.6000
FX: 972.542.6044
-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Ken Clark
Sent: Tuesday, June 05, 2001 2:32 PM
To: bugtrack@dieboldes.com
Subject: RE: Burning PCMCIA cards with Laptop + Win 2000

Precisely.  Does it happen if you do the exact same download proceedure to R6, as opposed to downloading to NT/W2K.  Pull the card out of R6 when it asks "do you want to download another", and put it in another R6.
 
Ken
 
-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Mike Brown
Sent: Tuesday, June 05, 2001 12:36 PM
To: bugtrack@dieboldes.com
Subject: RE: Burning PCMCIA cards with Laptop + Win 2000

Carifying this, if I download from GEMS to an R6 unit, say direct cable, then move the card to another machine, does the same thing happen?
 
Mike Brown
1611 Wilmeth Road,
McKinney, T.X.
75069
PH: 972.542.6000
FX: 972.542.6044
-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Ken Clark
Sent: Tuesday, June 05, 2001 1:44 PM
To: bugtrack@dieboldes.com
Subject: RE: Burning PCMCIA cards with Laptop + Win 2000

Okay, excellent report.  Bonus points, does the same thing happen with pure 4.x R6 AVTS?  That is, if you download multiple memory cards to R6 AVTS, then put a card not yet "unpacked" into another R6, does it wipe the card?
 
Ken
 
 
-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Mike Brown
Sent: Tuesday, June 05, 2001 11:47 AM
To: bugtrack@dieboldes.com
Subject: RE: Burning PCMCIA cards with Laptop + Win 2000

Okidoke now here are the problems I have found.
 
When I create a PCMCIA card on the NT, or Win 2000 machine and continue to load that card into the Ballot Station that I used to download the card, the election unpacks itself and works.  If I pull the card when the Ballot station asks me "Do you want to Download another?"  I move the card to either another Win 2000 machine or into an R6 unit, the unit asks me if I want to Download an election.  At this point, the R6, or Win 2000 machine has deleted the Election that was on there.
Mike
 
  
 
Mike Brown
1611 Wilmeth Road,
McKinney, T.X.
75069
PH: 972.542.6000
FX: 972.542.6044
-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Ken Clark
Sent: Tuesday, June 05, 2001 11:24 AM
To: bugtrack@dieboldes.com
Subject: RE: Burning PCMCIA cards with Laptop + Win 2000

Does the PCMCIA card created on the NT load on 4.x ballot station running on NT?  If so, zip the contents, and send it to me.
 
Ken
 
-----Original Message-----
From: owner-bugtrack@dieboldes.com [mailto:owner-bugtrack@dieboldes.com]On Behalf Of Mike Brown
Sent: Tuesday, June 05, 2001 9:07 AM
To: Bugtrack@Gesn. Com
Subject: Burning PCMCIA cards with Laptop + Win 2000

If I burn a PCMCIA card with WinNT 4.0, I can remove the card, and place it in an R6 unit and the DB will load.  Problem with this setup is, I can only burn 1 card, since the OS crashes after that.  NT does not do well with hot swapping anything.  When I attempt the same procedure with a windows 2000 machine, I can theoretically hot swap the PCMCIA card, if I make sure I wait the required 10-20 seconds for the machine to realize that I pulled the card, and it issue's me a dialog box that informs me of this.  I then have to click the OK button to acknowledge to the system that I know I have removed the card, then I can insert a new blank card to continue burning my PCMCIA cards.  That is all fine and dandy, but another problem arises, after burning the PCMCIA card, I them proceed casually over to the R6 unit, and insert the card, I then get the Download Election Dialog box, not the loading election.  I have looked at the contents of the PCMCIA card, and have not seen any differences.  The election will not load, and yes, I have tried this a few times with the same results.
Mike
 
Mike Brown
1611 Wilmeth Road,
McKinney, T.X.
75069
PH: 972.542.6000
FX: 972.542.6044