boa

Homework 1: Boa, Due Friday, September 6

This assignment (and the compiler implementation sequence) is heavily based on assignments written by Joe Gibbs Politz for his compilers class at UCSD. We appreciate his permission to use and adapt them for this course!

In this assignment you'll implement a compiler for a small language called Boa, that has let bindings and binary operators.

Setup

Get the starter code for the assignment at https://www.cs.cmu.edu/~aldrich/courses/17-363-fa24/hw/boa-starter.zip.

The Boa Language

In each of the next several assignments, we'll introduce a language that we'll implement. We'll start small, and build up features incrementally. We're starting with Boa, which has just a few features – defining variables, and primitive operations on numbers.

There are a few pieces that go into defining a language for us to compile:

  • A description of the concrete syntax – the text the programmer writes.
  • A description of the abstract syntax – how to express what the programmer wrote in a data structure our compiler uses.
  • A description of the behavior of the abstract syntax, so our compiler knows what the code it generates should do.

Concrete Syntax

The concrete syntax of Boa is:

<expr> := | <number> | <identifier> | (let (<binding> +) <expr>) | (add1 <expr>) | (sub1 <expr>) | (+ <expr> <expr>) | (- <expr> <expr>) | (* <expr> <expr>) <binding> := (<identifier> <expr>)

Here, a let expression can have one or more bindings (that's what the <binding> + notation means). <number>s are in base 10 and must be representable as an i32. <identifier>s are names and should be limited to alphanumeric characters, hyphens, and underscores, and should start with a letter. (The sexp library handles more than this, but this keeps things nicely readable.)

Abstract Syntax

The abstract syntax of Boa is a Rust enum. Note that this representation is different from what we used in Adder.

enum Op1 { Add1, Sub1 } enum Op2 { Plus, Minus, Times } enum Expr { Number(i32), Id(String), Let(Vec<(String, Expr)>, Box<Expr>), UnOp(Op1, Box<Expr>), BinOp(Op2, Box<Expr>, Box<Expr>) }

Semantics

A "semantics" describes the languages' behavior without giving all of the assembly code for each instruction.

A Boa program always evaluates to a single integer.

  • Numbers evaluate to themselves (so a program just consisting of Number(5) should evaluate to the integer 5).
  • Unary operator expressions perform addition or subtraction by one on their argument. If the result wouldn't fit in an i32, the program can have any behavior (e.g. overflow with add1 or underflow with sub1).
  • Binary operator expressions evaluate their arguments and combine them based on the operator. If the result wouldn't fit in an i32, the program can have any behavior (e.g. overflow or underflow with +/-/*).
  • Let bindings should use lexical scoping: evaluate all the binding expressions to values one by one, and after each, store a mapping from the given name to the corresponding value in both (a) the rest of the bindings, and (b) the body of the let expression. Identifiers evaluate to whatever their current stored value is.

There are several examples further down to make this concrete.

The compiler should stop and report an error if:

  • There is a binding list containing two or more bindings with the same name. The error should contain the string "Duplicate binding"
  • An identifier is unbound (there is no surrounding let binding for it) The error should contain the string "Unbound variable identifier {identifier}" (where the actual name of the variable is substituted for {identifier})

If there are multiple errors, the compiler can report any non-empty subset of them.

Here are some examples of Boa programs. In the "Abstract Syntax" parts, we assume that the program has appropriate use statements to avoid the Expr:: and other prefixes in order to write the examples compactly.

Example 1

Concrete Syntax

5

Abstract Syntax

Number(5)

Result

5

Example 2

Concrete Syntax

(sub1 (add1 (sub1 5)))

Abstract Syntax

UnOp(Sub1, Box::new(UnOp(Add1, Box::new(UnOp(Sub1, Box::new(Number(5)))))))

Result

4

Example 3

Concrete Syntax

(let ((x 5)) (add1 x))

Abstract Syntax

Let(vec![("x".to_string(), Number(5))], Box::new(UnOp(Add1, Box::new(Id("x".to_string())))))

Result

6

More examples

(sub1 5) # as an expr UnOp(Sub1, Box::new(Number(5))) # evaluates to 4
(let ((x 10) (y 7)) (* (- x y) 2)) # as an expr Let(vec![("x".to_string(), Number(10)), ("y".to_string(), Number(7))], Box::new(BinOp(Times, Box::new(BinOp(Minus, Box::new(Id("x".to_string())), Box::new(Id("y".to_string())))), Box::new(Number(2))))); # evaluates to 6

Implementing a Compiler for Boa

You've been given a starter codebase that has several pieces of infrastructure:

  • A main program (main.rs) that uses the parser and compiler to produce assembly code from an input Boa text file. You don't need to edit this much except to change how result is filled in.
  • A Makefile and a runner (runtime/start.rs) that are basically the same as the ones from Homework 0
  • Extra infrastructure for running unit tests in tests/infra (you don't need to edit tests/infra, but you may enjoy reading it).
  • A test file, tests/all_tests.rs, which describes the expected output and expected errors for .snek files in the tests/ directory. You will add your own tests by filling in new entries in success_tests! and failure_tests!; we've provided a few examples. Each entry corresponds to a single .snek file. You will add a lot more – focus on making these interesting and thorough!

Writing the Parser

The parser will be given a S-expression representing the whole program, and must build a AST of the Expr data type from this S-expression.

An S-expression in Rust is of the following type:

pub enum Sexp { Atom(Atom), List(Vec<Sexp>), } pub enum Atom { S(String), I(i64), F(f64), }

Thus, an example S-expression that could be parsed into a program would be as follows

List(vec![Atom("let"), List(vec![List(vec![Atom("x"), Atom("5")])]), Atom("x")])

which corresponds to

(let ((x 5)) x)

in Boa or

{ let x = 5; x }

in Rust.

This should then parse to the AST

Let(vec![("x".to_string(), Number(5))], Id("x".to_string()))

which can then be compiled.

Since most S-expressions are lists, you will need to check the first element of the list to see if the operation to perform is a let, add1, *, and so on. If an S-expression is of an invalid form, (i.e. a let with no body, a + with three arguments, etc.) panic with a message containing the string "Invalid".

You can assume that an id is a valid string of form [a-zA-z][a-zA-Z0-9]*. You will, however, have to check that the string does not match any of the language's reserved words, such as let, add1, and sub1.

The parsing should be implemented in

fn parse_expr(s: &Sexp) -> Expr { todo!("parse_expr"); }

You can also implement a helper function parse_bind

fn parse_bind(s: &Sexp) -> (String, Expr) { todo!("parse_bind"); }

which may be helpful for handling let expressions.

Writing the Compiler

The primary task of writing the Boa compiler is simple to state: take an instance of the Expr type and turn it into a list of assembly instructions. Start by defining a function that compiles an expression into a list of instructions:

fn compile_to_instrs(e: &Expr) -> Vec<Instr> { todo!("compile_to_instrs"); }

which takes an Expr value (abstract syntax) and turns it into a list of assembly instructions, represented by the Instr type. Use only the provided instruction types for this assignment; we will be gradually expanding this as the semester progresses.

Note: For variable bindings, we used im::HashMap<String, i32> from the im crate. We use the immutable HashMap here to make nested scopes easier because we found it annoying to remember to pop variables when you leave a scope. You're welcome to use any reasonable strategy here.

The other functions you need to implement are:

fn instr_to_str(i: &Instr) -> String { todo!("instr_to_str"); } fn val_to_str(v: &Val) -> String { todo!("val_to_str"); }

They render individual instances of the Instr type and Val type into a string representation of the instruction. This second step is straightforward, but forces you to understand the syntax of the assembly code you are generating. Most of the compiler concepts happen in the first step, that of generating assembly instructions from abstract syntax. Feel free to ask or refer to on-line resources if you want more information about a particular assembly instruction!

After that, put everything together with a compile function that compiles an expression into assembly represented by a string.

fn compile(e: &Expr) -> String { todo!("compile"); }

Assembly instructions

The Instr type is defined in the starter code. The assembly instructions that you will have to become familiar with for this assignment are:

  • IMov(Val, Val) — Copies the right operand (source) into the left operand (destination). The source can be an immediate argument, a register or a memory location, whereas the destination can be a register or a memory location.

    Examples:

    mov rax, rbx mov [rax], 4
  • IAdd(Val, Val) — Add the two operands, storing the result in its first operand.

    Example: add rax, 10

  • ISub(Val, Val) — Store in the value of its first operand the result of subtracting the value of its second operand from the value of its first operand.

    Example: sub rax, 216

  • IMul(Val, Val) — Multiply the left argument by the right argument, and store in the left argument (typically the left argument is rax for us)

    Example: imul rax, 4

Running

Put your test .snek files in the test/ directory. Run make test/<file>.s to compile your snek file into assembly.

$ make test/add1.s cargo run -- test/add1.snek test/add1.s $ cat test/add1.s section .text global our_code_starts_here our_code_starts_here: mov rax, 131 ret

To actually evaluate your assembly code, we need to link it with runtime.rs to create an executable. This is covered in the Makefile.

$ make test/add1.run nasm -f elf64 test/add1.s -o runtime/our_code.o ar rcs runtime/libour_code.a runtime/our_code.o rustc -L runtime/ runtime/start.rs -o test/add1.run

Finally you can run the file by executing to see the evaluated output:

$ ./test/add1.run 131

Ignoring or Changing the Starter Code

You can change a lot of what we describe above; it's a (relatively strong) suggestion, not a requirement. You might have different ideas for how to organize your code or represent things. That's a good thing! What we've shown in class and this writeup is far from the only way to implement a compiler.

To ease the burden of grading, we ask that you keep the following in mind: we will grade your submission (in part) by copying our own tests/ directory in place of the one you submit and running cargo test -- --test-threads 1. This relies on the interface provided by the Makefile of producing .s files and .run files. It doesn't rely on any of the data definitions or function signatures in src/main.rs. So with that constraint in mind, feel free to make new architectural decisions yourself.

Strategies, and FAQ

Working Incrementally

If you are struggling to get started, here are a few ideas:

  • Try to tackle features one at a time. For example, you might completely ignore let expressions at first, and just work on addition and numbers to start. Then you can work into subtraction, multiplication, and so on.
  • Some features can be broken down further. For example, the let expressions in this assignment differ from the ones in class by having multiple variables allowed per let expression. However, you can first implement let for just a single variable (which will look quite a bit like what we did in class!) and then extend it for multiple bindings.
  • Use git! Whenver you're in a working state with some working tests, make a commit and leave a message for yourself. That way you can get back to a good working state later if you end up stuck.

FAQ

What should (let ((x 5) (z x)) z) produce?

From the writeup above: “Let bindings should evaluate all the binding expressions to values one by one, and after each, store a mapping from the given name to the corresponding value in both (a) the rest of the bindings, and (b) the body of the let expression. Identifiers evaluate to whatever their current stored value is.”

Do Boa programs always have the extra parentheses around the bindings?

In Boa, there's always the extra set of parens around the list.

Can we write additional helper functions?

Yes.

Do we care about the text return from panic?

Absolutely. Any time you write software you should strive to write thoughtful error messages. They will help you while debugging, you when you make a mistake coming back to your code later, and anyone else who uses your code.

As for the autograder, we expect you to catch parsing and compilation errors. For parsing errors you should panic! an error message containing the word Invalid. For compilation errors, you should catch duplicate binding and unbound variable identifier errors and panic! Duplicate binding and Unbound variable identifier {identifier} respectively.

How should we check that identifiers are valid according to the description in the writeup?

From the writeup: “You can assume that an id is a valid string of form [a-zA-z][a-zA-Z0-9]*. You will, however, ...”

Assume means that we're not expecting you to check this for the purposes of the assignment (though you're welcome to if you like).

What should the program () compile to?

Is () a Boa program (does it match the grammar)? What should the compiler do with a program that doesn't match the grammar?

What's the best way to test? What is test case testing?

A few suggestions:

  • First, make sure to test all the different expressions as a baseline
  • Then, look at the grammar. There are lots of places where <expr> appears. In each of those positions, any other expression could appear. So let can appear inside + and vice versa, and in the binding position of let, and so on. Make sure you've tested enough nested expressions to be confident that each expression works no matter the context
  • Names of variables are interesting – the names can appear in different places and have different meanings depending on the structure of let. Make sure that you've tried different combinations of let naming and uses of variables.

My tests non-deterministically fail sometimes

You are probably running cargo test instead of cargo test -- --test-threads 1. The testing infrastructure interacts with the file system in a way that can cause data races when tests run in parallel. Limiting the number of threads to 1 will probably fix the issue.

Handin

Hand in a zip of your entire repository to the Homework 1 assignment on Gradescope.

If you do the extra credit (see below), demonstrate your JIT compiler working on at least 5 different examples by running your compiler in interactive mode and entering the examples at the prompt one by one, with your JIT showing the result of execution each time. Copy this interactino into a file called extra-credit.txt

Grading

A lot of the credit you get will be based on us running autograded tests on your submission. We'll combine that with some amount of manual grading involving looking at your testing and implementation strategy. You should have your own thorough test suite (it's not unreasonable to write many dozens of tests; you probably don't need hundreds), and you need to have recognizably implemented a compiler. For example, you could try to calculate the answer for these programs and generate a single mov instruction: don't do that, it doesn't demonstrate the learning outcomes we care about.

Any credit you lose will come with instructions for fixing similar mistakes on future assignments.

Extension (Extra Credit): Assembling Directly from Rust

Boa is set up as a traditional ahead-of-time compiler that generates an assembly file and (with some help from system linkers) eventually a binary.

Many language systems work this way (it's what rustc, gcc, and clang do, for instance), but many modern systems also generate machine code directly from the process that runs the compiler, and the compiler's execution can be interleaved with users' program execution. This isn't a new idea, Smalltalk and LISP are early examples of languages built atop runtime code generation. JavaScript engines in web browsers are likely the most ubiquitous use case.

Rust, with detailed control over memory and a broad package system, provides a pretty good environment for doing this kind of runtime code generation. In these assignment extensions, we'll explore how to build on our compiler to create a system in this style, and showcase some unique features it enables.

These extensions are not required. However, we'd be delighted to hear about what you're trying for them in office hours, see what you've done, and give feedback on them. We (and Joe Gibbs Politz) have done a little bit of work to proof-of-concept some of this, but you'll be largely on your own and things aren't guaranteed to be obviously possible.

The primary tool we think is particularly useful here is dynasm. (You might also find assembler useful, but it hasn't been updated in a while and we recommend dynasm as easiest to use). The basic idea is that dynasm provides Rust macros that build up a vector of bytes representing machine instructions. References to these vectors can be cast using mem::transmute Rust functions, which can be called from our code.

As a first step towards building a dynamic system, you should try building a REPL, or read-eval-print loop, re-using as much as possible from the Boa compiler. That is, you should be able to support interactions like the below, where one new syntactic form, define, has been added.

$ cargo run -- -i # rather than input/output files, specify -i for interactive > (let ((x 5)) (+ x 10)) 15 > (define x 47) > x 47 > (+ x 4) 51

A sample of how to get started with this is at adder-dyn. We won't give any hints or support beyond this except:

  • The REPL is probably best implemented as a while loop in main
  • You'll need to figure out how to store the defined variables on the heap somewhere and refer to them from the generated code

Happy hacking!