
%Filename: AAAI.sty
%
\typeout{Conference Style for AAAI -- version of 22 February 1994}
% Place this in a file called aaai.sty in the TeX search path.  (Placing
% it in the same directory as the paper should also work.)

% Prepared by Peter F. Patel-Schneider, liberally using the ideas of
% other style hackers, including Barbara Beeton.
% This style is NOT guaranteed to work.  It is provided in the hope
% that it will make the preparation of papers easier.
%
% There are undoubtably bugs in this style.  If you make bug fixes,
% improvements, etc.  please let me know.  My e-mail address is:
%       pfps@research.att.com

% The preparation of this file was supported by Schlumberger Palo Alto
% Research, AT\&T Bell Laboratories, AAAI, and Morgan Kaufmann Publishers.

% These instructions can be modified and used in other conferences as long
% as credit to the authors and supporting agencies is retained, this notice
% is not changed, and further modification or reuse is not restricted.

% Appended to the file so that the Bibliography style is closer to the
% one specified in the Instructions to Authors for AAAI papers.
% This style is NOT guaranteed to work.  It is provided in the hope
% that it will make the preparation of papers easier.
% Standard disclaimers apply. Send comments etc., to si@cs.cmu.edu

% Papers are to be prepared as follows:
%       \documentstyle[aaai]{article}
%       \title{Title}
%       \author{Author 1 \and Author 2 \\ Address line \\ Address line \And
%               Author 3 \\ Address line \\ Address line}
%       \begin{document}
%       ...
%       \bibliography{Bibliography-File}
%       \bibliographystyle{aaai}
%       \end{document}

% Author information can be set in various styles:
% For several authors from the same institution:
% \author{Author 1 \and ... \and Author n \\
%         Address line \\ ... \\ Address line}
% if the names do not fit well on one line use
%         Author 1 \\ {\bf Author 2} \\ ... \\ {\bf Author n} \\
% For authors from different institutions:
% \author{Author 1 \\ Address line \\  ... \\ Address line
%         \And  ... \And
%         Author n \\ Address line \\ ... \\ Address line}
% To start a seperate ``row'' of authors use \AND, as in
% \author{Author 1 \\ Address line \\  ... \\ Address line
%         \AND
%         Author 2 \\ Address line \\ ... \\ Address line \And
%         Author 3 \\ Address line \\ ... \\ Address line}

% If the title and author information does not fit in the area allocated,
% place \setlength\titlebox{<new height>} after the \documentstyle line
% where <new height> is something like 2.5in

% NOTE:  Some laser printers have a serious problem printing TeX output.
% These printing devices, commonly known as ``write-white'' laser
% printers, tend to make characters too light.  To get around this
% problem, a darker set of fonts must be created for these devices.
%

% Physical page layout
\setlength\topmargin{-0.25in} \setlength\oddsidemargin{-0.205in}
\setlength\textheight{8.9in} \setlength\textwidth{6.91in}
\setlength\columnsep{0.375in}  \newlength\titlebox \setlength\titlebox{2.25in}
\setlength\headheight{0pt}   \setlength\headsep{0pt}
\setlength\footheight{0pt}   \setlength\footskip{0pt}
\thispagestyle{empty}        \pagestyle{empty}
\flushbottom \twocolumn \sloppy

% We're never going to need a table of contents, so just flush it to
% save space --- suggested by drstrip@sandia-2
\def\addcontentsline#1#2#3{}

% Title stuff, taken from deproc.
\def\maketitle{\par
 \begingroup % to make the footnote style local to the title
   \def\thefootnote{\fnsymbol{footnote}}
   \def\@makefnmark{\hbox to 0pt{$^{\@thefnmark}$\hss}}
   \twocolumn[\@maketitle] \@thanks
 \endgroup
\setcounter{footnote}{0}
 \let\maketitle\relax \let\@maketitle\relax
 \gdef\@thanks{}\gdef\@author{}\gdef\@title{}\let\thanks\relax}
\def\@maketitle{\vbox to \titlebox{\hsize\textwidth
 \linewidth\hsize \vskip 0.625in minus 0.125in \centering
 {\LARGE\bf \@title \par} \vskip 0.2in plus 1fil minus 0.1in
 {\def\and{\unskip\enspace{\rm and}\enspace}%
  \def\And{\end{tabular}\hss \egroup \hskip 1in plus 2fil
           \hbox to 0pt\bgroup\hss \begin{tabular}[t]{c}\Large\bf}%
  \def\AND{\end{tabular}\hss\egroup \hfil\hfil\egroup
          \vskip 0.25in plus 1fil minus 0.125in
           \hbox to \linewidth\bgroup\Large \hfil\hfil
             \hbox to 0pt\bgroup\hss \begin{tabular}[t]{c}\Large\bf}
  \hbox to \linewidth\bgroup\normalsize \hfil\hfil
    \hbox to 0pt\bgroup\hss \begin{tabular}[t]{c}\Large\bf\@author
                            \end{tabular}\hss\egroup
    \hfil\hfil\egroup}
  \vskip 0.3in plus 2fil minus 0.1in
}}

\renewenvironment{abstract}{\centerline{\bf
Abstract}\vspace{0.5ex}\begin{quote}\small}{\par\end{quote}\vskip 1ex}

% sections with less space
\def\section{\@startsection {section}{1}{\z@}{-2.0ex plus
    -0.5ex minus -.2ex}{3pt plus 2pt minus 1pt}{\Large\bf\centering}}
\def\subsection{\@startsection{subsection}{2}{\z@}{-2.0ex plus
    -0.5ex minus -.2ex}{3pt plus 2pt minus 1pt}{\large\bf\raggedright}}
\def\subsubsection{\@startsection{subparagraph}{3}{\z@}{-6pt plus
   2pt minus 1pt}{-1em}{\normalsize\bf}}
\setcounter{secnumdepth}{0}

% Footnotes
\footnotesep 6.65pt %
\skip\footins 9pt plus 4pt minus 2pt
\def\footnoterule{\kern-3pt \hrule width 5pc \kern 2.6pt }
\setcounter{footnote}{0}

% Lists and paragraphs
\parindent 10pt
\topsep 4pt plus 1pt minus 2pt
\partopsep 1pt plus 0.5pt minus 0.5pt
\itemsep 2pt plus 1pt minus 0.5pt
\parsep 2pt plus 1pt minus 0.5pt

\leftmargin 10pt \leftmargini\leftmargin \leftmarginii 10pt
\leftmarginiii 5pt \leftmarginiv 5pt \leftmarginv 5pt \leftmarginvi 5pt
\labelwidth\leftmargini\advance\labelwidth-\labelsep \labelsep 5pt

\def\@listi{\leftmargin\leftmargini}
\def\@listii{\leftmargin\leftmarginii
   \labelwidth\leftmarginii\advance\labelwidth-\labelsep
   \topsep 2pt plus 1pt minus 0.5pt
   \parsep 1pt plus 0.5pt minus 0.5pt
   \itemsep \parsep}
\def\@listiii{\leftmargin\leftmarginiii
    \labelwidth\leftmarginiii\advance\labelwidth-\labelsep
    \topsep 1pt plus 0.5pt minus 0.5pt
    \parsep \z@ \partopsep 0.5pt plus 0pt minus 0.5pt
    \itemsep \topsep}
\def\@listiv{\leftmargin\leftmarginiv
     \labelwidth\leftmarginiv\advance\labelwidth-\labelsep}
\def\@listv{\leftmargin\leftmarginv
     \labelwidth\leftmarginv\advance\labelwidth-\labelsep}
\def\@listvi{\leftmargin\leftmarginvi
     \labelwidth\leftmarginvi\advance\labelwidth-\labelsep}

\abovedisplayskip 7pt plus2pt minus5pt%
\belowdisplayskip \abovedisplayskip
\abovedisplayshortskip  0pt plus3pt%
\belowdisplayshortskip  4pt plus3pt minus3pt%

% Less leading in most fonts (due to the narrow columns)
% The choices were between 1-pt and 1.5-pt leading
\def\@normalsize{\@setsize\normalsize{11pt}\xpt\@xpt}	% 10 point on 11
\def\small{\@setsize\small{10pt}\ixpt\@ixpt}		% 9 point on 10
\def\footnotesize{\@setsize\footnotesize{10pt}\ixpt\@ixpt} % 9 point on 10
\def\scriptsize{\@setsize\scriptsize{8pt}\viipt\@viipt}	% 7 point on 8
\def\tiny{\@setsize\tiny{7pt}\vipt\@vipt}		% 6 point on 7
\def\large{\@setsize\large{12pt}\xipt\@xipt} 		% 11 point on 12
\def\Large{\@setsize\Large{14pt}\xiipt\@xiipt} 		% 12 point on 14
\def\LARGE{\@setsize\LARGE{16pt}\xivpt\@xivpt} 		% 14 point on 16
\def\huge{\@setsize\huge{20pt}\xviipt\@xviipt} 		% 17 point on 20
\def\Huge{\@setsize\Huge{23pt}\xxpt\@xxpt} 		% 20 point on 23



%%%% named style for aaai, included here for ease of use

% This section implements citations for the ``named'' bibliography style,
% modified for AAAI use.

% This file can be modified and used in other conferences as long
% as credit to the authors and supporting agencies is retained, this notice
% is not changed, and further modification or reuse is not restricted.

% The ``named'' bibliography style creates citations with labels like
%	\citeauthoryear{author-info}{year}
% these labels are processed by the following commands:
%	\cite{keylist}
%		which produces citations with both author and year,
%		enclosed in square brackets
%	\shortcite{keylist}
%		which produces citations with year only,
%		enclosed in square brackets
%	\citeauthor{key}
%		which produces the author information only
%	\citeyear{key}
%		which produces the year information only

\def\leftcite{(}\def\rightcite{)}

\def\cite{\def\citeauthoryear##1##2{\def\@thisauthor{##1}%
 	     \ifx \@lastauthor \@thisauthor \relax \else##1 \fi ##2}\@icite}
\def\shortcite{\def\citeauthoryear##1##2{##2}\@icite}

\def\citeauthor{\def\citeauthoryear##1##2{##1}\@nbcite}
\def\citeyear{\def\citeauthoryear##1##2{##2}\@nbcite}

% internal macro for citations with () and with breaks between citations
% used in \cite and \shortcite
\def\@icite{\leavevmode\def\@citeseppen{-1000}%
 \def\@cite##1##2{\leftcite\nobreak\hskip 0in{##1\if@tempswa ,
##2\fi}\rightcite}%
 \@ifnextchar [{\@tempswatrue\@citex}{\@tempswafalse\@citex[]}}
% internal macro for citations without [] and with no breaks
% used in \citeauthor and \citeyear
\def\@nbcite{\leavevmode\def\@citeseppen{1000}%
 \def\@cite##1##2{{##1\if@tempswa , ##2\fi}}%
 \@ifnextchar [{\@tempswatrue\@citex}{\@tempswafalse\@citex[]}}

% don't box citations, separate with ; and a space
% also, make the penalty between citations a parameter,
% it may be a good place to break
\def\@citex[#1]#2{%
  \def\@lastauthor{}\def\@citea{}%
  \@cite{\@for\@citeb:=#2\do
    {\@citea\def\@citea{;\penalty\@citeseppen\ }%
     \if@filesw\immediate\write\@auxout{\string\citation{\@citeb}}\fi
     \@ifundefined{b@\@citeb}{\def\@thisauthor{}{\bf ?}\@warning
       {Citation `\@citeb' on page \thepage \space undefined}}%
     {\csname b@\@citeb\endcsname}\let\@lastauthor\@thisauthor}}{#1}}

%Ignore the key when generating the Reference section.
\def\@lbibitem[#1]#2{\item\if@filesw
      { \def\protect##1{\string ##1\space}\immediate
        \write\@auxout{\string\bibcite{#2}{#1}}}\fi\ignorespaces}

\def\thebibliography#1{\section*{References\@mkboth
 {REFERENCES}{REFERENCES}}\list
 {}{\labelwidth 0in\leftmargin\labelwidth
 \advance\leftmargin\labelsep \itemsep .01in}
 \def\newblock{\hskip .11em plus .33em minus .07em}
 \sloppy\clubpenalty4000\widowpenalty4000
 \sfcode`\.=1000\relax}
\let\endthebibliography=\endlist



