% Psfig/TeX Release 1.2
% dvi2ps-li version
%
% All software, documentation, and related files in this distribution of
% psfig/tex are Copyright 1987, 1988 Trevor J. Darrell
%
% Permission is granted for use and non-profit distribution of psfig/tex 
% providing that this notice be clearly maintained, but the right to
% distribute any portion of psfig/tex for profit or as part of any commercial
% product is specifically reserved for the author.
%
% $Header: psfig.tex,v 1.9 88/01/08 17:42:01 trevor Exp $
% $Source: $
%
% Thanks to Greg Hager (GDH) and Ned Batchelder for their contributions
% to this project.
%
\catcode`\@=11\relax
\newwrite\@unused
\def\typeout#1{{\let\protect\string\immediate\write\@unused{#1}}}
\typeout{psfig/tex 1.2-dvi2ps-li}

%% Here's how you define your figure path.  Should be set up with null
%% default and a user useable definition.

\def\figurepath{}
\def\psfigurepath#1{\edef\figurepath{#1}}

%
% @psdo control structure -- similar to Latex @for.
% I redefined these with different names so that psfig can
% be used with TeX as well as LaTeX, and so that it will not 
% be vunerable to future changes in LaTeX's internal
% control structure,
%
\def\@nnil{\@nil}
\def\@empty{}
\def\@psdonoop#1\@@#2#3{}
\def\@psdo#1:=#2\do#3{\edef\@psdotmp{#2}\ifx\@psdotmp\@empty \else
    \expandafter\@psdoloop#2,\@nil,\@nil\@@#1{#3}\fi}
\def\@psdoloop#1,#2,#3\@@#4#5{\def#4{#1}\ifx #4\@nnil \else
       #5\def#4{#2}\ifx #4\@nnil \else#5\@ipsdoloop #3\@@#4{#5}\fi\fi}
\def\@ipsdoloop#1,#2\@@#3#4{\def#3{#1}\ifx #3\@nnil 
       \let\@nextwhile=\@psdonoop \else
      #4\relax\let\@nextwhile=\@ipsdoloop\fi\@nextwhile#2\@@#3{#4}}
\def\@tpsdo#1:=#2\do#3{\xdef\@psdotmp{#2}\ifx\@psdotmp\@empty \else
    \@tpsdoloop#2\@nil\@nil\@@#1{#3}\fi}
\def\@tpsdoloop#1#2\@@#3#4{\def#3{#1}\ifx #3\@nnil 
       \let\@nextwhile=\@psdonoop \else
      #4\relax\let\@nextwhile=\@tpsdoloop\fi\@nextwhile#2\@@#3{#4}}
% 
%
\def\psdraft{
        \def\@psdraft{0}
        %\typeout{draft level now is \@psdraft \space . }
}
\def\psfull{
        \def\@psdraft{100}
        %\typeout{draft level now is \@psdraft \space . }
}
\psfull
\newif\if@prologfile
\newif\if@postlogfile
\newif\if@noisy
\def\pssilent{
        \@noisyfalse
}
\def\psnoisy{
        \@noisytrue
}
\psnoisy
%%% These are for the option list.
%%% A specification of the form a = b maps to calling \@p@@sa{b}
\newif\if@bbllx
\newif\if@bblly
\newif\if@bburx
\newif\if@bbury
\newif\if@height
\newif\if@width
\newif\if@rheight
\newif\if@rwidth
\newif\if@clip
\newif\if@verbose
\newif\if@percent
\def\@p@@sclip#1{\@cliptrue}

%%% GDH 7/26/87 -- changed so that it first looks in the local directory,
%%% then in a specified global directory for the ps file.

\def\@p@@sfile#1{\def\@p@sfile{null}%
                \openin1=#1
                \ifeof1\closein1%
                       \openin1=\figurepath#1
                        \ifeof1\typeout{Error, File #1 not found}
                        \else\closein1
                            \edef\@p@sfile{\figurepath#1}%
                        \fi%
                 \else\closein1%
                       \def\@p@sfile{#1}%
                 \fi}
\def\@p@@sfigure#1{\def\@p@sfile{null}%
                \openin1=#1
                \ifeof1\closein1%
                       \openin1=\figurepath#1
                        \ifeof1\typeout{Error, File #1 not found}
                        \else\closein1
                            \def\@p@sfile{\figurepath#1}%
                        \fi%
                 \else\closein1%
                       \def\@p@sfile{#1}%
                 \fi}

\def\@p@@spercent#1{
                \typeout{percent is #1}
                \@percenttrue
                \edef\@p@spercent{\number#1}
}
\def\@p@@sbbllx#1{
                %\typeout{bbllx is #1}
                \@bbllxtrue
                \dimen100=#1
                \edef\@p@sbbllx{\number\dimen100}
}
\def\@p@@sbblly#1{
                %\typeout{bblly is #1}
                \@bbllytrue
                \dimen100=#1
                \edef\@p@sbblly{\number\dimen100}
}
\def\@p@@sbburx#1{
                %\typeout{bburx is #1}
                \@bburxtrue
                \dimen100=#1
                \edef\@p@sbburx{\number\dimen100}
}
\def\@p@@sbbury#1{
                %\typeout{bbury is #1}
                \@bburytrue
                \dimen100=#1
                \edef\@p@sbbury{\number\dimen100}
}
\def\@p@@sheight#1{
                \@heighttrue
                \dimen100=#1
                \edef\@p@sheight{\number\dimen100}
                %\typeout{Height is \@p@sheight}
}
\def\@p@@swidth#1{
                %\typeout{Width is #1}
                \@widthtrue
                \dimen100=#1
                \edef\@p@swidth{\number\dimen100}
}
\def\@p@@srheight#1{
                %\typeout{Reserved height is #1}
                \@rheighttrue
                \dimen100=#1
                \edef\@p@srheight{\number\dimen100}
}
\def\@p@@srwidth#1{
                %\typeout{Reserved width is #1}
                \@rwidthtrue
                \dimen100=#1
                \edef\@p@srwidth{\number\dimen100}
}
\def\@p@@ssilent#1{ 
                \@verbosefalse
}
\def\@p@@sprolog#1{\@prologfiletrue\def\@prologfileval{#1}}
\def\@p@@spostlog#1{\@postlogfiletrue\def\@postlogfileval{#1}}
\def\@cs@name#1{\csname #1\endcsname}
\def\@setparms#1=#2,{\@cs@name{@p@@s#1}{#2}}
%
% initialize the defaults (size the size of the figure)
%
\def\ps@init@parms{
                \@bbllxfalse \@bbllyfalse
                \@bburxfalse \@bburyfalse
                \@heightfalse \@widthfalse
                \@rheightfalse \@rwidthfalse
                \def\@p@sbbllx{}\def\@p@sbblly{}
                \def\@p@sbburx{}\def\@p@sbbury{}
                \def\@p@sheight{}\def\@p@swidth{}
                \def\@p@srheight{}\def\@p@srwidth{}
                \def\@p@sfile{}
                \def\@p@percent{}
                \def\@p@scost{10}
                \def\@sc{}
                \@prologfilefalse
                \@postlogfilefalse
                \@clipfalse
                \@percentfalse
                \if@noisy
                        \@verbosetrue
                \else
                        \@verbosefalse
                \fi

}
%
% Go through the options setting things up.
%
\def\parse@ps@parms#1{
                \@psdo\@psfiga:=#1\do
                   {\expandafter\@setparms\@psfiga,}}
%
% Compute bb height and width
%
\newif\ifno@bb
\newif\ifnot@eof
\newread\ps@stream
\def\bb@missing{
        \if@verbose{
                \typeout{psfig: searching \@p@sfile \space  for bounding box}
        }\fi
        \openin\ps@stream=\@p@sfile
        \no@bbtrue
        \not@eoftrue
        \catcode`\%=12
        \loop
                \read\ps@stream to \line@in
                \global\toks200=\expandafter{\line@in}
                \ifeof\ps@stream \not@eoffalse \fi
                %\typeout{ looking at :: \the\toks200 }
                \@bbtest{\toks200}
                \if@bbmatch\not@eoffalse\expandafter\bb@cull\the\toks200\fi
        \ifnot@eof \repeat
        \catcode`\%=14
}       
\catcode`\%=12
\newif\if@bbmatch
\def\@bbtest#1{\expandafter\@a@\the#1%%BoundingBox:\@bbtest\@a@}
\long\def\@a@#1%%BoundingBox:#2#3\@a@{\ifx\@bbtest#2\@bbmatchfalse\else\@bbmatchtrue\fi}
\long\def\bb@cull#1 #2 #3 #4 #5 {
        \dimen100=#2 bp\edef\@p@sbbllx{\number\dimen100}
        \dimen100=#3 bp\edef\@p@sbblly{\number\dimen100}
        \dimen100=#4 bp\edef\@p@sbburx{\number\dimen100}
        \dimen100=#5 bp\edef\@p@sbbury{\number\dimen100}
        \no@bbfalse
}
\catcode`\%=14
%
\def\compute@bb{
                \no@bbfalse
                \if@bbllx \else \no@bbtrue \fi
                \if@bblly \else \no@bbtrue \fi
                \if@bburx \else \no@bbtrue \fi
                \if@bbury \else \no@bbtrue \fi
                \ifno@bb \bb@missing \fi
                \ifno@bb \typeout{FATAL ERROR: no bb supplied or found}
                        \no-bb-error
                \fi
                %
                \count203=\@p@sbburx
                \count204=\@p@sbbury
                \advance\count203 by -\@p@sbbllx
                \advance\count204 by -\@p@sbblly
                \edef\@bbw{\number\count203}
                \edef\@bbh{\number\count204}
                %\typeout{ bbh = \@bbh, bbw = \@bbw }
}
%
% \in@hundreds performs #1 * (#2 / #3) correct to the hundreds,
%       then leaves the result in @result
%
\def\in@hundreds#1#2#3{\count240=#2 \count241=#3
                     \count100=\count240        % 100 is first digit #2/#3
                     \divide\count100 by \count241
                     \count101=\count100
                     \multiply\count101 by \count241
                     \advance\count240 by -\count101
                     \multiply\count240 by 10
                     \count101=\count240        %101 is second digit of #2/#3
                     \divide\count101 by \count241
                     \count102=\count101
                     \multiply\count102 by \count241
                     \advance\count240 by -\count102
                     \multiply\count240 by 10
                     \count102=\count240        % 102 is the third digit
                     \divide\count102 by \count241
                     \count200=#1\count205=0
                     \count201=\count200
                        \multiply\count201 by \count100
                        \advance\count205 by \count201
                     \count201=\count200
                        \divide\count201 by 10
                        \multiply\count201 by \count101
                        \advance\count205 by \count201
                        %
                     \count201=\count200
                        \divide\count201 by 100
                        \multiply\count201 by \count102
                        \advance\count205 by \count201
                        %
                     \edef\@result{\number\count205}
}
\def\compute@wfromh{
                % computing : width = height * (bbw / bbh)
                \in@hundreds{\@p@sheight}{\@bbw}{\@bbh}
                %\typeout{ \@p@sheight * \@bbw / \@bbh, = \@result }
                \edef\@p@swidth{\@result}
                %\typeout{w from h: width is \@p@swidth}
}
\def\compute@hfromw{
                % computing : height = width * (bbh / bbw)
                \in@hundreds{\@p@swidth}{\@bbh}{\@bbw}
                %\typeout{ \@p@swidth * \@bbh / \@bbw = \@result }
                \edef\@p@sheight{\@result}
                %\typeout{h from w : height is \@p@sheight}
}
\def\compute@hwpercent{
                \in@hundreds{\@p@sheight}{\@p@spercent}{100}
                \edef\@p@sheight{\@result}      
                \in@hundreds{\@p@swidth} {\@p@spercent}{100}
                \edef\@p@swidth{\@result}
}
                
\def\compute@handw{
                \if@height 
                        \if@width
                        \else
                                \compute@wfromh
                        \fi
                \else 
                        \if@width
                                \compute@hfromw
                        \else
                                \edef\@p@sheight{\@bbh}
                                \edef\@p@swidth{\@bbw}
                        \fi
                \fi
                \if@percent \compute@hwpercent \fi                      
}
\def\compute@resv{
                \if@rheight \else \edef\@p@srheight{\@p@sheight} \fi
                \if@rwidth \else \edef\@p@srwidth{\@p@swidth} \fi
}
%               
% Compute any missing values
\def\compute@sizes{
        \compute@bb
        \compute@handw
        \compute@resv
}
%
% \psfig
% usage : \psfig{file=, height=, width=, bbllx=, bblly=, bburx=, bbury=,
%                       rheight=, rwidth=, clip=}
%
% "clip=" is a switch and takes no value, but the `=' must be present.
\def\psfig#1{\vbox {
        % do a zero width hard space so that a single
        % \psfig in a centering environment will behave nicely
        %{\setbox0=\hbox{\ }\ \hskip-\wd0}
        %
        \ps@init@parms
        \parse@ps@parms{#1}
        \compute@sizes
        %
        \ifnum\@p@scost<\@psdraft{
                \if@verbose{
                        \typeout{psfig: including \@p@sfile \space }
                }\fi
                %
                \special{ pstext=\@p@swidth \space 
                        \@p@sheight \space
                        \@p@sbbllx \space \@p@sbblly \space 
                        \@p@sbburx  \space 
                        \@p@sbbury \space startTexFig \space}
                \if@clip{
                        \if@verbose{
                                \typeout{(clip)}
                        }\fi
                        \special{ pstext="doclip \space"}
                }\fi
                \if@prologfile
                    \special{psfile=\@prologfileval \space } \fi
                \special{psfile=\@p@sfile \space }
                \if@postlogfile
                    \special{psfile=\@postlogfileval \space } \fi
                \special{pstext=endTexFig \space }
                % Create the vbox to reserve the space for the figure
                \vbox to \@p@srheight true sp{
                        \hbox to \@p@srwidth true sp{
                                \hss
                        }
                        \vss
                }
        }\else{
                % draft figure, just reserve the space and print the
                % path name.
                \vbox to \@p@srheight true sp{
                \vss
                        \hbox to \@p@srwidth true sp{
                                \hss
                                \if@verbose{
                                        \@p@sfile
                                }\fi
                                \hss
                        }
                \vss
                }
        }\fi
}}
\def\psglobal{\typeout{psfig: PSGLOBAL is OBSOLETE; use psprint -m instead}}
\catcode`\@=12\relax


%
% Backward compatibility w/ PSADOBE
%
\def\psadobe#1{\psfig{file=#1}}
\def\psadobepercent#1#2{\psfig{file=#2,percent=#1}}
