Newsgroups: sci.image.processing
Path: cantaloupe.srv.cs.cmu.edu!das-news2.harvard.edu!news2.near.net!news.mathworks.com!news.duke.edu!news-feed-1.peachnet.edu!gatech!howland.reston.ans.net!math.ohio-state.edu!news.acns.nwu.edu!news.eecs.nwu.edu!k9ape
From: k9ape@eecs.nwu.edu (Sheldon L. Epstein)
Subject: Re: framegrabber with tms320c25 onboard
Message-ID: <D5JME4.CvB@eecs.nwu.edu>
Sender: usenet@eecs.nwu.edu
Organization: EECS Department, Northwestern University
References: <3jv9o9$t17@sun1.uni-essen.de> <1995Mar14.151325.18393@mixcom.com>
Distribution: usa
Date: Thu, 16 Mar 1995 17:10:51 GMT
Lines: 38

In article <1995Mar14.151325.18393@mixcom.com>,
ELJA inc  <ELJA.inc@mixcom.com> wrote:
>In <3jv9o9$t17@sun1.uni-essen.de> tnk070@aixrs1.hrz.uni-essen.de (Christian Buechel) writes:
>
>>I am looking for a framegrabber with signalprocessor onboard preferably 
>>a TMS 320C25 or 30. I alrready have one in use but there are some 
>>limitations (ie image can aonly be accessed during vertical retrace for 
>>3.6 ms).
>
>You might want to contact Coreco.  They have a board, the Oculus-F/64
>board, which has a TMS34020 or TMS320C40 DSP on it.  They may have
>one with the 25 or 30. 
>
>Coreco
>(800) 361-4914
>
>
>Mike McWhinney
>Elja, Inc.
>--
>========================================================================
>ELJA, Inc.  TEL: (414) 357-6771   FAX: (414) 357-9394
>            email: elja.inc@mixcom.com
>========================================================================

Also contact EPIX at 708:465-1818 for more info on the following:

		Model 12     - One TMS320C25 @ 12.5 MHz

		COC401       - One TMS320C40 @ 50 MHz

		COC402       - Two TMS320C40 @ 50 MHz
				Supports Parallel Processing.

The COC402 is our 'weapon of choice'

		Shel Epstein, k9ape@eecs.nwu.edu

