% File 'uga.sty' -- Michael A. Covington 1993.
% Version 1.1 (OFFICIALLY APPROVED).

% This file should reside in your current directory or in
% the directory where LaTeX '.sty' files are kept.
% If it is in both places, the one in your current directory takes 
% precedence.

\typeout{* --------------------------------------------------------------------------}
\typeout{* UGa style sheet, version 1.1, 8 July 1993. }
\typeout{* This version is distributed with the approval of the Graduate School,}
\typeout{* but actual printouts must be checked to ensure correct format.}
\typeout{* Remember to run LaTeX twice to get a correct table of contents.}
\typeout{* Check margins on YOUR printout; add offset commands if needed.}
\typeout{* --------------------------------------------------------------------------}

% This is a LaTeX style sheet for University of Georgia theses,
% intended to be used with 12pt report style only.

% New in this version of uga.sty:
% * The 'thebibliography' environment (used with BibTeX) correctly
%    generates an entry in the table of contents.

% New in recent versions of uga.sty:
% * A line separates footnotes from the text above them.
% * Copyright page is optional; \nocopyright suppresses it.
% * Roman numbering of pages near the front is correct.
% * Bottom-centered page numbers are higher than in versions 0.1-0.5.
% * Total amount of hyphenation has been reduced by changing the
%    conditions under which a word can be hyphenated.
% * New environment 'singlespace' for use within 'quote' and similar
%    environments, to get single spacing.  Note that 'singlespace'
%    should go inside 'quote' (etc.), not the other way around.
%    See UGASAMPL.TEX for an example.
% * Environment 'verbatim' has been modified to always single space.
%    This is correct because 'verbatim' is used for displayed material.
% * Bottom margin has been reduced as per new (1992) regulations.

% This style sheet is considerably closer to Turabian format than the
% style sheets used at other institutions.

% Developed by:   Michael A. Covington
%                 Artificial Intelligence Programs
%                 The University of Georgia
%                 Athens, Georgia 30602
%                 mcovingt@ai.uga.edu

% Incorporating code by Leslie Lamport (from the LaTeX distribution)
% and by Joseph Pallas et al. (from SUTHESIS.STY, Stanford University).


% IMPORTANT NOTE:
% It is assumed that you already know how to use LaTeX and the
% predefined 'report' format. If not, read Lamport's fine book
% and practice using trial and error. Once your thesis prints
% properly in 'report' format, converting to 'uga' format should
% be easy.

% MARGIN PROBLEMS???
%  If your printer prints everything in a slightly incorrect position
%  on the paper, you can insert directives such as
%     \hoffset = 0.5in    % print 0.5 inch to the right
%     \voffset = -0.1in   % print 0.1 inch higher than normal
%  just before \begin{document}.
%  The values shown here are the defaults.
%  Use larger numbers to shift down or to the right;
%  use smaller (or negative) numbers to shift up or to the left.
% PLEASE CHECK YOUR PRINTER AND MAKE SURE EVERYTHING IS POSITIONED CORRECTLY.


% A document to be formatted with this style sheet should
% have the following structure, much of which will already
% be there if you have been using 'report'.

%  \documentstyle[12pt,uga]{report}            % important!
%
%  % Information for title page:
%
%  \title{Syntactic Theory in the \\
%         High Middle Ages}           % title of your thesis
%
%  \author{Michael A. Covington}      % your name here
%
%  \previousdegrees{B.A., The University of Georgia, 1977 \\
%                   M.Phil., Cambridge University, 1978}
%                                     % your previous degrees, to appear
%                                     % below your name on title page
%
%  \thisdegree{Doctor of Philosophy}  % or Master of Science, etc.
%  \thesistype{Dissertation}          % or Thesis, or Technical Report
%  \thesisyear{1991}                  % year degree is to be conferred
%
%  \nocopyright   % include this only if you DON'T want a copyright page
%
%  % Additional information for the abstract page (if any):
%
%  \fulltitle{Syntactic Theory in the High Middle Ages}
%                                     % like \title but not broken up by \\
%
%  \professor{Abraham Baldwin}        % your major professor
%
%  \indexwords{syntax, semantics, medieval~Latin, Modistae}
%                                     % index words for Diss. Abstracts
%                                     % note ~ instead of space in 2-word terms
%
%  \begin{document}
%
%  \pagenumbering{roman}       % Use Roman numerals for preface, etc.
%
%  \begin{abstract}
%  Text of abstract (up to 150 words for master's, 350 doctoral).
%  Heading with title is generated automatically.
%  Abstract must come _here_ in order not to disrupt page numbering.
%  \end{abstract}
%
%  \maketitle           % Generates title, copyright, and signature pages.
%
%  \chapter*{Acknowledgements}
%  Text of acknowledgements...
%
%  \chapter*{Preface}
%  Text of preface...
%
%  \tableofcontents     % Generated by LaTeX.  You must run LaTeX TWICE.
%  \listoffigures       % (Optional)
%  \listoftables        % (Optional)
%
%  \newpage
%  \pagenumbering{arabic}  % Switch to ordinary page numbering here.
%
%  \chapter{Introduction}
%  Text of first chapter...
%
%  \chapter{Conclusion}
%  Text of another chapter...
%
%  \chapter*{Bibliography}
%  %    OR USE  \begin{thebibliography}...\end{thebibliography} instead.
%  % You can use LaTeX's bibliography--generating tools if you like.
%  % A simpler alternative is to just type the bibliography, like this:
%  \begin{reflist}
%  Abrahams, P. W.; Berry, K.; and Hargreaves, K. A. (1990)
%  {\em TeX for the Impatient.} Reading, Mass.: Addison--Wesley.
%
%  Knuth, D. E. (1984) {\em The TeXbook.} Reading, Mass.: Addison--Wesley.
%
%  Lamport, L. (1986) {\em LaTeX: A Document Preparation System.} Reading,
%  Mass.: Addison--Wesley.
%  \end{reflist}
%
%  \appendix
%  \chapter{Some More Things}
%  Text of first appendix.
%  Appendices are simply chapters after "\appendix".
%
%  \end{document}    % That's all.  Now graduate!
%

% MARGINS:
%   As specified by the University of Georgia typing guide sheet.
%   See ``MARGIN PROBLEMS'' above if yours come out wrong.

% PAGINATION:
%   The abstract pages are not numbered.
%   The title page, signature page, and copyright page are pages i-iii
%     but do not have numbers printed on them.
%   Roman numbering continues until explicitly changed to Arabic
%     at the beginning of the text.


%%%%%%%%%%%%%%%%%%
% INITIALIZATION %
%%%%%%%%%%%%%%%%%%

% Make sure that the user specified \documentstyle[12pt,uga]{report}.
% A common error is to say \documentstyle{uga}  (wrong!).
%
\@ifundefined{chapter}
   {\@latexerr{-- WRONG DOCUMENTSTYLE; SHOULD BE: \noexpand\documentstyle[12pt,uga]{report}}
              {-- Documentstyle should be: \noexpand\documentstyle[12pt,uga]{report}}}
   {}

% Only 'report', not 'book', defines ds@twoside.
\@ifundefined{ds@twoside}
   {\@latexerr{-- WRONG DOCUMENTSTYLE; SHOULD BE: \noexpand\documentstyle[12pt,uga]{report}}
              {-- Documentstyle should be: \noexpand\documentstyle[12pt,uga]{report}}}
   {}

\ifdim \baselineskip = 14.5pt    % Check for 12-pt type
  \relax
\else
   \@latexerr{-- WRONG DOCUMENTSTYLE; SHOULD BE: \noexpand\documentstyle[12pt,uga]{report}}
             {-- Documentstyle should be: \noexpand\documentstyle[12pt,uga]{report}}
\fi

%%%%%%%%%%%%%%%%
% DECLARATIONS %
%%%%%%%%%%%%%%%%

% Allow the author to declare degree, year, professor, etc.,
% and provide suitable defaults.

\gdef\ugapreviousdegrees{(*Previous Degrees Go Here*)}
\def\previousdegrees#1{\gdef\ugapreviousdegrees{#1}}

\gdef\ugathisdegree{(*UGa Degree Goes Here*)}
\def\thisdegree#1{\gdef\ugathisdegree{#1}}

\gdef\ugathesistype{(*Thesis Type Goes Here*)}
\def\thesistype#1{\gdef\ugathesistype{#1}}

\gdef\ugathesisyear{\number\year}
\def\thesisyear#1{\gdef\ugathesisyear{#1}}

\gdef\ugaprofessor{(*Major professor's name*)}
\def\professor#1{\gdef\ugaprofessor{#1}}

\gdef\ugaindexwords{(*Index words go here*)}
\def\indexwords#1{\gdef\ugaindexwords{#1}}

\gdef\ugafulltitle{(*Full title, not broken by backslashes, goes here*)}
\def\fulltitle#1{\gdef\ugafulltitle{#1}}

\newcommand{\nocopyright}{\def\uganocopyright{1}}

%%%%%%%%%%%%%%%%%%%%%%%%%%%
% MARGINS AND PAGE LAYOUT %
%%%%%%%%%%%%%%%%%%%%%%%%%%%

% Pages are numbered at the upper right,
% except that the first page of each chapter
% is numbered at the bottom.

\pagestyle{myheadings}
\markboth{}{}

\raggedbottom


% (Following copied from SUTHESIS.STY, Stanford University.)

% We need 1" margins except on the binding edge, where it is 1 1/2"
% Theses are single-sided, so we don't care about \evensidemargin
\oddsidemargin 0.5in      % left margin 1.5 in
\evensidemargin 0in
\marginparwidth 40pt
\marginparsep 10pt
\topmargin -0.15in
\headsep .18in
\textheight 8.79in
\textwidth 5.92in
\footskip 0.37in    % default is 0.5 in and page numbers come out too low

% Reduce the overall amount of hyphenation
% These aren't usable with TeX versions lower than 3.0.
% If you are using a lower version of TeX, delete the next 3 lines.
\emergencystretch=0.2in
\lefthyphenmin=3
\righthyphenmin=4

% Disallow page breaks at hyphens, except where the only alternative
% is a widow or orphan (club)
\brokenpenalty=9900

% Disallow all widows and orphans (clubs)
\widowpenalty=10000
\clubpenalty=10000

% Use 1.65 times the normal baseline-to-baseline skip
% for the appearance of double spacing
\renewcommand{\baselinestretch}{1.65}

% Print footnotes in small (not tiny) type
\let\footnotesize\small

% Redefine the macro used for floats (including figures and tables)
% so that single spacing is used.
% (Note \def\figure{\@float{figure}set single spacing} doesn't work
%  because figure has an optional argument)
\def\@xfloat#1[#2]{\ifhmode \@bsphack\@floatpenalty -\@Mii\else
   \@floatpenalty-\@Miii\fi\def\@captype{#1}\ifinner
      \@parmoderr\@floatpenalty\z@
    \else\@next\@currbox\@freelist{\@tempcnta\csname ftype@#1\endcsname
       \multiply\@tempcnta\@xxxii\advance\@tempcnta\sixt@@n
       \@tfor \@tempa :=#2\do
                        {\if\@tempa h\advance\@tempcnta \@ne\fi
                         \if\@tempa t\advance\@tempcnta \tw@\fi
                         \if\@tempa b\advance\@tempcnta 4\relax\fi
                         \if\@tempa p\advance\@tempcnta 8\relax\fi
         }\global\count\@currbox\@tempcnta}\@fltovf\fi
    \global\setbox\@currbox\vbox\bgroup 
    \def\baselinestretch{1}\@normalsize
    \boxmaxdepth\z@
    \hsize\columnwidth \@parboxrestore}

% Redefine the macro used for footnotes to use single spacing
\long\def\@footnotetext#1{\insert\footins{\def\baselinestretch{1}\footnotesize
    \interlinepenalty\interfootnotelinepenalty 
    \splittopskip\footnotesep
    \splitmaxdepth \dp\strutbox \floatingpenalty \@MM
    \hsize\columnwidth \@parboxrestore
   \edef\@currentlabel{\csname p@footnote\endcsname\@thefnmark}\@makefntext
    {\rule{\z@}{\footnotesep}\ignorespaces
      #1\strut}}}

% Define environment 'singlespace', which can be used within other
% environments such as 'quote' (but not 'verbatim') to force single 
% spacing.  From doublespace.sty; originally credited to MIT.

\def\singlespace{%
\vskip\parskip%
\vskip\baselineskip%
\def\baselinestretch{1}%
\ifx\@currsize\normalsize\@normalsize\else\@currsize\fi%
%\tiny\normalsize%
\vskip-\parskip%
\vskip-\baselineskip%
}

\def\endsinglespace{\par}

% Redefine 'verbatim' so that it always single-spaces.
% Michael A. Covington 1992

% If you want 'verbatim' to double-space, simply make your own
% copy of uga.sty in which this code is commented out.

\def\@verbatim{%
\trivlist%
\vskip\topskip%
%\vskip\parskip%
%\setlength{\partopsep}{0pt}%
\def\baselinestretch{1}%
\ifx\@currsize\normalsize\@normalsize\else\@currsize\fi%
%\tiny\normalsize%
\vskip-\topskip%
%\vskip-\parskip%
\item[]\if@minipage\else\vskip\parskip\fi
\leftskip\@totalleftmargin\rightskip\z@
\parindent\z@\parfillskip\@flushglue\parskip\z@
\@tempswafalse \def\par{\if@tempswa\hbox{}\fi\@tempswatrue\@@par}
\obeylines \tt \catcode``=13 \@noligs \let\do\@makeother \dospecials}

\def\verbatim{\@verbatim \frenchspacing\@vobeyspaces \@xverbatim}
\let\endverbatim=\endtrivlist


%%%%%%%%%%%%%%%%%%%%
% CHAPTER HEADINGS %
%%%%%%%%%%%%%%%%%%%%

% Centered at top of page, in imitation of Turabian et al.
% This code is from rep12.sty, somewhat modified.

% \@makechapterhead {TEXT} : Makes the heading for the \chapter command.
%

\def\@makechapterhead#1{             % Heading for \chapter command
  \vspace*{25pt}                     % Space at top of text page.
  { \parindent 0pt \raggedright 
    \ifnum \c@secnumdepth >\m@ne     % IF secnumdepth > -1 THEN
      \sc
      \centerline{\@chapapp{} \thechapter} % Print 'Chapter' and number.
      \par 
      \vskip 10pt
    \fi                              % Space between number and title.
    \sc                              % Title.
    \centerline{#1} \par
    \nobreak                         % TeX penalty to prevent page break.
    \vskip 40pt                      % Space between title and text.
  } }

% \@makeschapterhead {TEXT} : Makes the heading for the \chapter* command.
%

\def\@makeschapterhead#1{            % Heading for \chapter* command
  \vspace*{25pt}                     % Space at top of page.
  { \parindent 0pt \raggedright 
    \sc                              % Title.
    \centerline{#1}\par
    \nobreak                         % TeX penalty to prevent page break.
    \vskip 40pt                      % Space between title and text.
  } }



%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% SECTION AND SUBSECTION HEADINGS %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% As in rep12.sty, but without any enlarged or bold type.  Small caps are used...

% (Change, 24 May 1992: Small caps for subsubsections too.)

\def\section{\@startsection {section}{1}{\z@}{-3.5ex plus -1ex minus 
 -.2ex}{2.3ex plus .2ex}{\normalsize \sc}}
\def\subsection{\@startsection{subsection}{2}{\z@}{-3.25ex plus -1ex minus 
 -.2ex}{1.5ex plus .2ex}{\normalsize \sc}}
\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{-3.25ex plus 
 -1ex minus -.2ex}{1.5ex plus .2ex}{\normalsize \sc}}
\def\paragraph{\@startsection
 {paragraph}{4}{\z@}{3.25ex plus 1ex minus .2ex}{-1em}{\normalsize}}
\def\subparagraph{\@startsection
 {subparagraph}{4}{\parindent}{3.25ex plus 1ex minus 
 .2ex}{-1em}{\normalsize}}



%%%%%%%%%%%%%%%%%%
% PSEUDOCHAPTERS %
%%%%%%%%%%%%%%%%%%

% The preface, acknowledgements, etc. are marked as \pseudochapter{Title}
% rather than \chapter*{Title}.  This puts them into the table of contents.

% Adapted from suthesis.sty.

\def\pseudochapter#1{%
	\chapter*{#1}
	\addcontentsline{toc}{chapter}{#1}}


% Redefine 'thebibliography' to do this too.

\def\thebibliography#1{\pseudochapter{Bibliography\@mkboth
 {BIBLIOGRAPHY}{BIBLIOGRAPHY}}\list
 {[\arabic{enumi}]}{\settowidth\labelwidth{[#1]}\leftmargin\labelwidth
 \advance\leftmargin\labelsep
 \usecounter{enumi}}
 \def\newblock{\hskip .11em plus .33em minus .07em}
 \sloppy\clubpenalty4000\widowpenalty4000
 \sfcode`\.=1000\relax}
\let\endthebibliography=\endlist



%%%%%%%%%%%%%%%%%%%%%
% TABLE OF CONTENTS %
%%%%%%%%%%%%%%%%%%%%%

% Entries do not use boldface. Copied with modifications from report.sty.

\def\l@part#1#2{\addpenalty{-\@highpenalty}
 \addvspace{2.25em plus 1pt} \begingroup
 \@tempdima 3em \parindent \z@ \rightskip \@pnumwidth \parfillskip
-\@pnumwidth 
 {%\large \bf 
  \sc \leavevmode #1\hfil \hbox to\@pnumwidth{\hss #2}}\par
 \nobreak \global\@nobreaktrue \everypar{\global\@nobreakfalse\everypar{}}
\endgroup}

\def\l@chapter#1#2{\addpenalty{-\@highpenalty} 
 \vskip 1.0em plus 1pt \@tempdima 1.5em \begingroup
 \parindent \z@ \rightskip \@pnumwidth 
 \parfillskip -\@pnumwidth 
 %\bf 
 \sc \leavevmode \advance\leftskip\@tempdima \hskip -\leftskip #1\nobreak\hfil
\nobreak\hbox to\@pnumwidth{\hss #2}\par
 \penalty\@highpenalty \endgroup}


% Superseding the previous defn., for a much plainer chapter entry style:
\def\l@chapter{\vskip 6pt\@dottedtocline{0}{0em}{1.5em}}

% List sections in the table of contents.  Do not list subsections...
\setcounter{tocdepth}{1}


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% TITLE, COPYRIGHT, AND SIGNATURE PAGES %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% Code taken from titlepage.sty and modified extensively.
% \maketitle generates title page, copyright page, and signature page.

\def\maketitle{
 %
 % Title page
 %
 \newpage
 \setcounter{page}{1}
 \thispagestyle{empty}
% \let\footnotesize\small      % Local definitions to make \thanks produce
% \let\footnoterule\relax      % \normalsize footnotes with no separating rule.
 \null
 %\vfil
 \vskip 1pt                   % To adjust centering.  (?)
 \begin{center}
   \vskip -6pt
   {\sc \@title \par}         % Set title in small caps.
   \vskip 18pt                % Vertical space after title.
   by
   \vskip 18pt
   {\sc                 % Set author in small caps.
     \lineskip 1.0em
     \begin{tabular}[t]{c}\@author 
     \end{tabular}\par}
    \vskip 12pt
    {\begin{tabular}[t]{c}\ugapreviousdegrees    % Candidate's degrees.
    \end{tabular}\par}
    \vfill                     % Vertical space after degrees.
    A \ugathesistype\ Submitted to the Graduate Faculty \par
    of The University of Georgia in Partial Fulfillment \par
    of the \par
    Requirements for the Degree \par
    \vskip 10pt
    {\sc \ugathisdegree} \par
    \vskip 36pt
    {\sc Athens, Georgia} \par
    \vskip 18pt
    \ugathesisyear \par
\end{center} \par
%
% Copyright page, included in ordinary numbering sequence
%
\@ifundefined{uganocopyright}
  {
  \typeout{* Generating copyright page.  Use \noexpand\nocopyright if you don't want it.}
  \newpage
  \thispagestyle{empty}
    \vspace*{3.5in}
    \begin{center}
      \copyright ~ \ugathesisyear \par
      \@author \par
      All Rights Reserved \par
    \end{center}
  }
  {
  \typeout{* (No copyright page.)}
  }
%
% Signature page, counts in numbering, no number printed
%
\newpage
\thispagestyle{empty}
 \null
 %\vfil
 \vskip 1pt                    % To adjust centering.  (?)
 \begin{center}
   \vskip -6pt
   {\sc \@title \par}          % Set title in small caps
   \vskip 18pt                 % Vertical space after title.
   by
   \vskip 18pt
   {\sc                        % Set author in large size.
     \lineskip 1.0em
     \begin{tabular}[t]{c}\@author 
     \end{tabular}\par}
    \vfill                     % Vertical space in middle of page
 \end{center} \par
 \vfill
 {
 \parindent 0pt
 ~ \hfill
   \makebox[170pt][l]{Approved:}
   \hskip 12pt
   \makebox[100pt]{~}
   \par
 \vskip 18pt
 ~ \hfill
   \underline{\makebox[170pt]{~}}
   \hskip 12pt
   \underline{\makebox[100pt]{~}}
   \par
 \vskip -4pt
 ~ \hfill
   \makebox[170pt][l]{Major Professor}
   \hskip 12pt
   \makebox[100pt][l]{Date}
   \par
%\vskip 18pt
% ~ \hfill
%   \underline{\makebox[170pt]{~}}
%   \hskip 12pt
%   \underline{\makebox[100pt]{~}}
%   \par
% \vskip -4pt                                         % No longer needed.
% ~ \hfill
%   \makebox[170pt][l]{Chairman, Reading Committee}
%   \hskip 12pt
%   \makebox[100pt][l]{Date}
%   \par
\vskip 48pt
Approved: \par
\vskip 18pt
\underline{\makebox[200pt]{~}} \par
\vskip -4pt
Graduate Dean \par
\vskip 12pt
\underline{\makebox[200pt]{~}} \par
\vskip -4pt
Date \par
}
%
%
%
\setcounter{footnote}{0}       % Footnotes start at zero again.
\gdef\@thanks{}
\gdef\@author{}
\gdef\@title{}
\let\maketitle\relax}    


%%%%%%%%%%%%%%%%%%%%
% ABSTRACT PAGE(S) %
%%%%%%%%%%%%%%%%%%%%

% Delimited by \begin{abstract} and \end{abstract}, which
% should enclose only the text of the abstract.

% The heading, and the closing with index words, are generated
% in the format desired by University Microfilms, using
% the user's \professor and \indexwords declarations.

% Possible pitfall: Page numbers are suppressed only on the
% _first_ and _last_ abstract pages. If an abstract is more than
% two pages long, tough luck -- University Microfilms won't
% like it either.

\def\abstract{
   %\titlepage
   \thispagestyle{empty}
   \setlength{\baselineskip}{14.5pt}   % for ersatz single spacing
   %\null
   %\vfil
     \begin{list}{}{
       \setlength{\labelwidth}{0pt}
       \setlength{\labelsep}{0pt}
       \setlength{\itemindent}{-12pt}
       \setlength{\leftmargin}{12pt}
       \setlength{\listparindent}{-12pt}
       \setlength{\parsep}{0pt}
       \setlength{\itemsep}{0pt}
                   }
       \item {\sc \@author}
       \item \ugafulltitle
       \item (Under the direction of {\sc \ugaprofessor})
     \end{list}
   \large \normalsize                  % force return to normal line spacing
}

\def\endabstract{
    \thispagestyle{empty}
    \vskip 12pt
    \par \noindent
    \begin{list}{\sc Index words: \hfill}
                {
                 \setlength{\leftmargin}{1.4in}
                 \setlength{\labelwidth}{1.2in}
                 \setlength{\labelsep}{0.2in}
                }
    \item \begin{flushleft} \ugaindexwords \end{flushleft}
    \end{list}
  \par
  \vfil\null
  %\endtitlepage
}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% REFLIST (REFERENCE LIST) ENVIRONMENT %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% For cowards who don't want to let LaTeX/BibTeX generate the
% bibliography, but who want to simply type it instead.
% Within a reflist, each 'paragraph' is a hanging-indented
% bibliography entry, and extra space is skipped between entries.
%
\newenvironment{reflist}{\begin{list}{}%
{\setlength{\labelwidth}{0pt}
 \setlength{\labelsep}{0pt}
 \setlength{\leftmargin}{3em}
 \setlength{\itemindent}{-3em}
 \setlength{\listparindent}{-3em}
 \setlength{\itemsep}{12pt}}\item}{\end{list}}
    % change 24 May 1992: was 6pt in previous line.

\typeout{* UGa style sheet loaded.}



