[Date Prev][Date Next] [Chronological] [Thread] [Top]

RE: Windows CE Fonts Installation



-----Original Message-----
From: owner-support@gesn.com [mailto:owner-support@gesn.com]On Behalf Of Steve Knecht
Sent: Monday, October 22, 2001 1:57 PM
To: support@gesn.com
Subject: Re: Windows CE Fonts Installation

There are 16 font files totaling about 28.9Mb here.  If you are doing only Chinese, it would make sense to include only the Chinese files, or with VIBS are we simply going to always use 128Mb cards?
 
Jeff,
Do the CE fonts contain all required fonts?  In other words did you have to add the Japanese separately, or was there some other issue with the Japanese?
 
Ken, this refers to Steves post, seen above.
My response was to give Steve as much info as possible as to which fonts belong to which language sets and to clarify why I had a problem with the Japanese font displaying correctly on the R6.
The warning refers to the elimination of any font within a language set, because even though not explicitly referred to in the election data base,  a missing font may cause problems.
 
 
jwh
-----Original Message-----
From: owner-support@gesn.com [mailto:owner-support@gesn.com]On Behalf Of Ken Clark
Sent: Wednesday, October 24, 2001 1:27 PM
To: support@gesn.com
Subject: RE: Windows CE Fonts Installation

From: owner-support@gesn.com [mailto:owner-support@gesn.com]On Behalf Of Jeff Hallmark
Sent: Wednesday, October 24, 2001 11:35 AM
 
Warning:
The current LA Data base Japanese font is MS Mincho, however
deleting MS Gothic, a  presumably unused font, caused the Japanese font to be incorrectly displayed on the R6, using  BS 4-1-1-7. 
 
Eh?   This sounds very suspicious.  Why would one delete the MS Gothic font?  Elaborate.
 
Ken