# # ==+====1====+====2====+====3====+====4====+====5====+====6====+====7====+====8====+====9====+====0 # # Copyright (c) 2007-2009, Kornel Laskowski # All rights reserved. # # Redistribution and use in source and binary forms, with or without modification, are permitted # provided that the following conditions are met: # # * Redistributions of source code must retain the above copyright notice, this list of # conditions and the following disclaimer. # * Redistributions in binary form must reproduce the above copyright notice, this list of # conditions and the following disclaimer in the documentation and/or other materials provided # with the distribution. # * Neither the name of Sigtactica Research or of the Royal Institute of Technology (KTH) or of # Carnegie Mellon University nor the names of their contributors may be used to endorse or # promote products derived from this software without specific prior written permission. # # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR # IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND # FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR # CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER # IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT # OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. # # ==+====1====+====2====+====3====+====4====+====5====+====6====+====7====+====8====+====9====+== */ REPOURL=http://www.cs.cmu.edu/~kornel/software MPEDODIR=edo-1.0.5 MPEDOBIN=mpedo SPEDODIR=edo-1.2.9 SPEDOBIN=spedo_n_nu_lomo DATADIR=lex.Q UNKFRACTION=min FIGURES = \ Figure1corrected.eps \ Figure2.eps \ Figure3.eps # --+----1----+----2----+----3----+----4----+----5----+----6----+----7----+----8----+----9----+----0 all : ${FIGURES} # ==+====1====+====2====+====3====+====4====+====5====+====6====+====7====+====8====+====9====+====0 # # OBTAIN THE MULTI-PORT EDO MODEL SOURCE # ${MPEDODIR}.tar.gz : wget ${REPOURL}/$@ ${MPEDODIR}.tar : ${MPEDODIR}.tar.gz gunzip $^ ${MPEDODIR} : ${MPEDODIR}.tar tar xvf $^ ${MPEDODIR}/${MPEDOBIN} : ${MPEDODIR} (cd $^; make clean; make ${MPEDOBIN}; cd ..) # ==+====1====+====2====+====3====+====4====+====5====+====6====+====7====+====8====+====9====+====0 # # OBTAIN THE SINGLE-PORT EDO MODEL SOURCE # ${SPEDODIR}.tar.gz : wget ${REPOURL}/$@ ${SPEDODIR}.tar : ${SPEDODIR}.tar.gz gunzip $^ ${SPEDODIR} : ${SPEDODIR}.tar tar xvf $^ ${SPEDODIR}/${SPEDOBIN} : ${SPEDODIR} (cd $^; make clean; make ${SPEDOBIN}; cd ..) # ==+====1====+====2====+====3====+====4====+====5====+====6====+====7====+====8====+====9====+====0 # # OBTAIN THE DISCRETE SPEECH CHRONOGRAMS FOR THE ICSI MEETING CORPUS # ${DATADIR}.tar.gz : wget ${REPOURL}/$@ ${DATADIR}.tar : ${DATADIR}.tar.gz gunzip $^ ${DATADIR} : ${DATADIR}.tar tar xvf $^ # ==+====1====+====2====+====3====+====4====+====5====+====6====+====7====+====8====+====9====+====0 # # Figure 1 ON PAGE 2 (5601 as published by IEEE) # Figure1corrected.eps : Figure1corrected.m matlab -nodisplay < $^ > /dev/null Figure1corrected.m : ${MPEDODIR}/${MPEDOBIN} ${SPEDODIR}/${SPEDOBIN} ${DATADIR} rm -f $@ echo -e "mpedoold = [\n\tNaN\n\tNaN\n\t1.1082\n\t1.0953\n\t1.0968\n\t1.0992\n];" > $@ echo "mpedonew = [" >> $@ for KMAXMODEL in 1 2 3 4 5 6; do \ echo -ne "\t"; \ ${MPEDODIR}/${MPEDOBIN} -QDir ${DATADIR} -KmaxModel $${KMAXMODEL} | grep ^ALL | sed "s/ \+/ /g" | cut -d' ' -f3; \ done >> $@ echo "];" >> $@ echo "spedo = [" >> $@ for KMAXMODEL in 1 2 3 4 5 6; do \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1 -QDir ${DATADIR} -KmaxModel $${KMAXMODEL} -unkFraction ${UNKFRACTION} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ done >> $@ echo "];" >> $@ echo "figure;" >> $@ echo "clf;" >> $@ echo "hold on;" >> $@ echo "plot(1:length(mpedoold),mpedoold,'ko-','MarkerFaceColor','w');" >> $@ echo "plot(1:length(mpedonew),mpedonew,'ko-','MarkerFaceColor','k');" >> $@ echo "plot(1:length(spedo),spedo,'k^-','MarkerFaceColor','k');" >> $@ echo "plot(1:length(mpedoold),mpedoold,'ko-','MarkerFaceColor','w');" >> $@ echo "set(gca,'XTick',1:length(spedo));" >> $@ echo "set(gca,'YTick',[1.095 1.1 1.105]);" >> $@ echo "axis([ -0.5 length(spedo)+0.5 1.0925 1.109 ]);" >> $@ echo "box on" >> $@ echo "grid on" >> $@ echo "text(2.8,mpedoold(3)-0.0001,'MPEDO (orig)','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "text(2.8,mpedonew(3)-0.0004,'MPEDO (fix)','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "text(0.8,spedo(1)+0.0004,'SPEDO','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "set(gcf,'PaperPositionMode','auto');" >> $@ echo "set(gcf,'PaperSize',[4.25 5.5]);" >> $@ echo "print -depsc2 Figure1corrected.eps" >> $@ echo "exit" >> $@ # ==+====1====+====2====+====3====+====4====+====5====+====6====+====7====+====8====+====9====+====0 # # Figure 2 ON PAGE 3 (5602 as published by IEEE) # Figure2.eps : Figure2.m matlab -nodisplay < $^ > /dev/null Figure2.m : ${SPEDODIR}/${SPEDOBIN} ${DATADIR} rm -f $@ echo "ngram2 = [" >> $@ for KMAXMODEL in 1 2 3 4 5 6; do \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1 -QDir ${DATADIR} -KmaxModel $${KMAXMODEL} -unkFraction ${UNKFRACTION} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ done >> $@ echo "];" >> $@ echo "ngram3 = [" >> $@ for KMAXMODEL in 1 2 3 4 5 6; do \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1,S2,N2 -QDir ${DATADIR} -KmaxModel $${KMAXMODEL} -unkFraction ${UNKFRACTION} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ done >> $@ echo "];" >> $@ echo "ngram4 = [" >> $@ for KMAXMODEL in 1 2 3 4 5 6; do \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1,S2,N2,S3,N3 -QDir ${DATADIR} -KmaxModel $${KMAXMODEL} -unkFraction ${UNKFRACTION} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ done >> $@ echo "];" >> $@ echo "ngram5 = [" >> $@ for KMAXMODEL in 1 2 3 4 5 6; do \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1,S2,N2,S3,N3,S4,N4 -QDir ${DATADIR} -KmaxModel $${KMAXMODEL} -unkFraction ${UNKFRACTION} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ done >> $@ echo "];" >> $@ echo "ngram6 = [" >> $@ for KMAXMODEL in 1 2 3 4 5 6; do \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1,S2,N2,S3,N3,S4,N4,S5,N5 -QDir ${DATADIR} -KmaxModel $${KMAXMODEL} -unkFraction ${UNKFRACTION} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ done >> $@ echo "];" >> $@ echo "figure;" >> $@ echo "clf;" >> $@ echo "hold on;" >> $@ echo "plot(1:length(ngram2),ngram2,'k^-','MarkerFaceColor','w');" >> $@ echo "plot(1:length(ngram3),ngram3,'kv-','MarkerFaceColor','w');" >> $@ echo "plot(1:length(ngram4),ngram4,'kd-','MarkerFaceColor','w');" >> $@ echo "plot(1:length(ngram5),ngram5,'ks-','MarkerFaceColor','w');" >> $@ echo "plot(1:length(ngram6),ngram6,'ko-','MarkerFaceColor','w');" >> $@ echo "set(gca,'XTick',[1 2 3 4 5 6]);" >> $@ echo "set(gca,'YTick',[1.095 1.1 1.105]);" >> $@ echo "axis([ -0.5 6.5 1.0925 1.109 ]);" >> $@ echo "box on" >> $@ echo "grid on" >> $@ echo "text(0.8,ngram2(1)-0.0010,'2-gram','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "text(0.8,ngram3(1)-0.0001,'3-gram','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "text(0.8,ngram4(1)-0.0001,'4-gram','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "text(0.8,ngram5(1)-0.0001,'5-gram','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "text(0.8,ngram6(1),'6-gram','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "[val,idx] = min(ngram2);" >> $@ echo "plot(idx,val,'k^-','MarkerFaceColor','k');" >> $@ echo "[val,idx] = min(ngram3);" >> $@ echo "plot(idx,val,'kv-','MarkerFaceColor','k');" >> $@ echo "[val,idx] = min(ngram4);" >> $@ echo "plot(idx,val,'kd-','MarkerFaceColor','k');" >> $@ echo "[val,idx] = min(ngram5);" >> $@ echo "plot(idx,val,'ks-','MarkerFaceColor','k');" >> $@ echo "[val,idx] = min(ngram6);" >> $@ echo "plot(idx,val,'ko-','MarkerFaceColor','k');" >> $@ echo "set(gcf,'PaperPositionMode','auto');" >> $@ echo "set(gcf,'PaperSize',[4.25 5.5]);" >> $@ echo "print -depsc2 Figure2.eps" >> $@ echo "exit" >> $@ # ==+====1====+====2====+====3====+====4====+====5====+====6====+====7====+====8====+====9====+====0 # # Figure 3 ON PAGE 3 (5602 as published by IEEE) # Figure3.eps : Figure3.m matlab -nodisplay < $^ > /dev/null Figure3.m : ${SPEDODIR}/${SPEDOBIN} ${DATADIR} rm -f $@ for SKIP in 0 1 2 3 4; do \ echo "skip$${SKIP} = ["; \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1,S2,N2,S3,N3,S4,N4,S5,N5 -QDir ${DATADIR} -KmaxModel 1 -unkFraction ${UNKFRACTION} -nu $${SKIP} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1,S2,N2,S3,N3,S4,N4 -QDir ${DATADIR} -KmaxModel 2 -unkFraction ${UNKFRACTION} -nu $${SKIP} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1,S2,N2,S3,N3 -QDir ${DATADIR} -KmaxModel 3 -unkFraction ${UNKFRACTION} -nu $${SKIP} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1,S2,N2 -QDir ${DATADIR} -KmaxModel 4 -unkFraction ${UNKFRACTION} -nu $${SKIP} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1,S2,N2 -QDir ${DATADIR} -KmaxModel 5 -unkFraction ${UNKFRACTION} -nu $${SKIP} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ echo -ne "\t"; \ ${SPEDODIR}/${SPEDOBIN} -history S1,N1,S2,N2 -QDir ${DATADIR} -KmaxModel 6 -unkFraction ${UNKFRACTION} -nu $${SKIP} | grep ^ALL | grep rest | sed "s/ \+/ /g" | cut -d' ' -f9; \ echo "];"; \ done >> $@ echo "figure;" >> $@ echo "clf;" >> $@ echo "hold on;" >> $@ echo "plot(1:length(skip0),skip0,'kx-','MarkerFaceColor','w');" >> $@ echo "plot(1:length(skip1),skip1,'kx-','MarkerFaceColor','w');" >> $@ echo "plot(1:length(skip2),skip2,'kx-','MarkerFaceColor','w');" >> $@ echo "plot(1:length(skip3),skip3,'kx-','MarkerFaceColor','w');" >> $@ echo "plot(1:length(skip4),skip4,'kx-','MarkerFaceColor','w');" >> $@ echo "set(gca,'XTick',[1 2 3 4 5 6]);" >> $@ echo "axis([ -0.5 6.5 1.08 1.24 ]);" >> $@ echo "text(0.8,skip0(1)-0.0025,'skip-0','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "text(0.8,skip1(1)+0.0050,'skip-1','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "text(0.8,skip2(1)-0.0015,'skip-2','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "text(0.8,skip3(1)-0.0015,'skip-3','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "text(0.8,skip4(1)-0.0015,'skip-4','HorizontalAlignment','right','VerticalAlignment','middle');" >> $@ echo "box on" >> $@ echo "grid on" >> $@ echo "set(gcf,'PaperPositionMode','auto');" >> $@ echo "set(gcf,'PaperSize',[4.25 5.5]);" >> $@ echo "print -depsc2 Figure3.eps" >> $@ echo "exit" >> $@ # ==+====1====+====2====+====3====+====4====+====5====+====6====+====7====+====8====+====9====+====0 clean : rm -rf ${FIGURES} *.m *.tar edo-*.*.* lex.* # ==+====1====+====2====+====3====+====4====+====5====+====6====+====7====+====8====+====9====+====0