X-Andrew-WideReply: netnews.comp.sys.dec X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: via nntpserv with nntp; Thu, 16 Jun 1994 15:27:59 -0400 (EDT) Path: andrew.cmu.edu!bb3.andrew.cmu.edu!honeydew.srv.cs.cmu.edu!das-news.harvard.edu!news2.near.net!MathWorks.Com!yeshua.marcam.com!usc!elroy.jpl.nasa.gov!netline-fddi.jpl.nasa.gov!nntp-server.caltech.edu!vance From: vance@alumni.caltech.edu (Vance R. Haemmerle) Newsgroups: comp.sys.dec Subject: Re: Need help on Emulex QD21 Controller. Date: 16 Jun 1994 18:52:40 GMT Organization: California Institute of Technology, Alumni Association Lines: 51 Message-ID: <2tq71o$e35@gap.cco.caltech.edu> References: NNTP-Posting-Host: alumni.caltech.edu In article , Barry Kort wrote: >I have a donated MicroVAX II with an Emulex QD21 ESDI Controller and >no docs. > >How do I bring up the Service Menu to format the drives? > Use the following console commands: >>> I ! Bus Init >>> D/P/W 20001F40 20 ! Enable memory >>> D/P/L 20088000 80000000 ! Setup Map 0 >>> D/P/L 20088004 80000001 ! Setup Map 1 >>> D/P/W 2000XXXX 1 ! Init Controller >>> E/P/W 2000YYYY ! STEP one from QD21 900 or B00 >>> D/P/W 2000YYYY 3003 ! Enable Special mode >>> E/P/W 2000YYYY ! ACK special mode 0100 >>> D/P/W 2000YYYY 4401 ! Upload driver >>> E/P/W 2000YYYY ! Upload done 0400 For MicroVAX II: >>> S 80 ! Start driver For GPX workstation: >>> S 82 ! Start driver Note: XXXX and YYYY are offsets dependent on the address of the QD21 controller - Controller bus XXXX YYYY address 772150 1468 146A 772154 146C 146E 760334 00DC 00DE 760340 00E0 00E2 760344 00E4 00E6 760350 00E8 00EA 760354 00EC 00EE 760360 00F0 00F2 -- Vance Haemmerle vance@alumni.caltech.edu