;;; -*- Mode: Lisp; Package: SDRAW -*- ;;; ;;; SDRAW - draws cons cell structures. ;;; ;;; From the book "Common Lisp: A Gentle Introduction to ;;; Symbolic Computation" by David S. Touretzky. ;;; The Benjamin/Cummings Publishing Co., 1990. ;;; ;;; This version is for Golden Common Lisp version 3.01 and up. ;;; Revised to include support for circular structures. ;;; ;;; User-level routines: ;;; (SDRAW obj) - draws obj on the display ;;; (SDRAW-LOOP) - puts the user in a read-eval-draw loop ;;; (SCRAWL obj) - interactively crawl around obj ;;; ;;; Variables: ;;; *SDRAW-PRINT-CIRCLE* If bound, overrides *PRINT-CIRCLE*. ;;; *SDRAW-LEADING-ARROW* Initially NIL. Set to T to get leading arrows. ;;; (setq gclisp::*inhibit-system-redefinition-warnings* t) (in-package "SDRAW" :use '("LISP" "GCLISP")) (export '(SDRAW::SDRAW SDRAW::SDRAW-LOOP SDRAW::SCRAWL SDRAW::*SDRAW-PRINT-CIRCLE* SDRAW::*SDRAW-LEADING-ARROW*)) (shadowing-import '(SDRAW::SDRAW SDRAW::SDRAW-LOOP SDRAW::SCRAWL SDRAW::*SDRAW-PRINT-CIRCLE* SDRAW::*SDRAW-LEADING-ARROW*) (find-package "USER")) (use-package "SDRAW" "USER") ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; ;;; The parameters below are in units of characters (horizontal) ;;; and lines (vertical). They apply to all versions of SDRAW, ;;; but their values may change if cons cells are being drawn as ;;; bit maps rather than as character sequences. (defparameter *sdraw-display-width* 79.) (defparameter *sdraw-display-height* 25) (defparameter *sdraw-vertical-cutoff* 22.) (defparameter *sdraw-horizontal-atom-cutoff* 79.) (defparameter *sdraw-horizontal-cons-cutoff* 65.) (defparameter *etc-string* "etc.") (defparameter *etc-spacing* 4.) (defparameter *inter-atom-h-spacing* 3.) (defparameter *cons-atom-h-arrow-length* 9.) (defparameter *inter-cons-v-arrow-length* 3.) (defparameter *cons-v-arrow-offset-threshold* 2.) (defparameter *cons-v-arrow-offset-value* 1.) (defparameter *leading-arrow-length* 4) (defparameter *sdraw-num-lines* 25) (defparameter *sdraw-vertical-cutoff* 22.) (defvar *sdraw-leading-arrow* nil) (defvar *sdraw-print-circle*) (defvar *sdraw-circular-switch*) (defvar *circ-detected* nil) (defvar *circ-label-counter* 0) (defvar *circ-hash-table* (make-hash-table :test #'eq :size 20)) (defvar *line-endings* (make-array *sdraw-num-lines*)) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; ;;; SDRAW and subordinate definitions. (defun sdraw (obj &aux (*circ-detected* nil)) (let ((*sdraw-circular-switch* (if (boundp '*sdraw-print-circle*) *sdraw-print-circle* *print-circle*)) (start-col (if *sdraw-leading-arrow* *leading-arrow-length* 0))) (init-struct1 start-col) (clrhash *circ-hash-table*) (let* ((first-layout (struct1 obj 0 start-col 0 nil)) (second-layout (when *circ-detected* (init-struct1 start-col) (struct1 obj 0 start-col 0 t)))) (clear-window) (clear-term) (draw-structure (or second-layout first-layout)) (set-term-pos 0 20)))) (defun init-struct1 (start-col) (setf *circ-label-counter* 0) (fill *line-endings* -2) (struct-record-position 0 (- start-col *inter-atom-h-spacing*))) (defun never-seen? (obj) (null (gethash obj *circ-hash-table*))) (defun seen-twice? (obj) (numberp (gethash obj *circ-hash-table*))) (defun needs-label? (obj) (zerop (gethash obj *circ-hash-table*))) (defun struct1 (obj row root-col adj second-pass) (cond ((>= row *sdraw-vertical-cutoff*) (struct-process-etc row root-col adj)) ((not second-pass) (enter-in-hash-table obj) (struct-first-pass obj row root-col adj)) (t (struct-second-pass obj row root-col adj)))) (defun enter-in-hash-table (obj) (unless (or (not *sdraw-circular-switch*) (numberp obj) (and (symbolp obj) (symbol-package obj))) (cond ((never-seen? obj) (setf (gethash obj *circ-hash-table*) t)) (t (setf (gethash obj *circ-hash-table*) 0) (setf *circ-detected* t))))) (defun struct-first-pass (obj row root-col adj) (if (seen-twice? obj) (struct-process-circ-reference obj row root-col adj) (if (atom obj) (struct-unlabeled-atom (format nil "~S" obj) row root-col adj) (struct-unlabeled-cons obj row root-col adj nil)))) (defun struct-second-pass (obj row root-col adj) (cond ((not (seen-twice? obj)) (if (atom obj) (struct-unlabeled-atom (format nil "~S" obj) row root-col adj) (struct-unlabeled-cons obj row root-col adj t))) ((needs-label? obj) (if (atom obj) (struct-label-atom obj row root-col adj) (struct-label-cons obj row root-col adj))) (t (struct-process-circ-reference obj row root-col adj)))) ;;; Handle the simplest case: an atom or cons with no #n= label. (defun struct-unlabeled-atom (atom-string row root-col adj) (let* ((start-col (struct-find-start row root-col adj)) (end-col (+ start-col adj (length atom-string)))) (cond ((< end-col *sdraw-horizontal-atom-cutoff*) (struct-record-position row end-col) (list 'atom row (+ start-col adj) atom-string)) (t (struct-process-etc row root-col adj))))) (defun struct-unlabeled-cons (obj row root-col adj second-pass) (let* ((cons-start (struct-find-start row root-col adj)) (car-structure (struct1 (car obj) (+ row *inter-cons-v-arrow-length*) cons-start adj second-pass)) (start-col (third car-structure))) (if (>= start-col *sdraw-horizontal-cons-cutoff*) (struct-process-etc row root-col adj) (progn (struct-record-position row (- (+ start-col *cons-atom-h-arrow-length*) adj *inter-atom-h-spacing*)) (list 'cons row start-col car-structure (struct1 (cdr obj) row (+ start-col *cons-atom-h-arrow-length*) 0 second-pass)))))) (defun struct-process-etc (row root-col adj) (let ((start-col (struct-find-start row root-col adj))) (struct-record-position row (+ start-col adj (length *etc-string*) *etc-spacing*)) (list 'msg row (+ start-col adj) *etc-string*))) ;;; Handle objects that need to be labeled with #n=. ;;; Called only on the second pass. (defun struct-label-atom (obj row root-col adj) (assign-label obj) (let* ((circ-string (format nil "#~S=" (gethash obj *circ-hash-table*))) (newadj (struct-find-adj row root-col adj (length circ-string))) (atom-string (format nil "~S" obj)) (start-col (struct-find-start row root-col adj)) (end-col (+ start-col newadj (length atom-string)))) (cond ((< end-col *sdraw-horizontal-atom-cutoff*) (struct-record-position row end-col) (list 'atom row (+ start-col newadj) atom-string circ-string)) (t (struct-process-etc row root-col adj))))) (defun struct-label-cons (obj row root-col adj) (assign-label obj) (let* ((string (format nil "#~S=" *circ-label-counter*)) (newadj (struct-find-adj row root-col adj (length string))) (cons-start (struct-find-start row root-col adj)) (car-structure (struct1 (car obj) (+ row *inter-cons-v-arrow-length*) cons-start newadj t)) (start-col (third car-structure))) (if (>= start-col *sdraw-horizontal-cons-cutoff*) (struct-process-etc row root-col adj) (progn (struct-record-position row (- (+ start-col *cons-atom-h-arrow-length*) adj *inter-atom-h-spacing*)) (list 'cons row start-col car-structure (struct1 (cdr obj) row (+ start-col *cons-atom-h-arrow-length*) 0 t) string))))) (defun assign-label (obj) (setf (gethash obj *circ-hash-table*) (incf *circ-label-counter*))) ;;; Handle circular references by displaying them as #n#. ;;; When called on the first pass, this function always uses a label of 0. ;;; It will get the label right on the second pass. (defun struct-process-circ-reference (obj row root-col adj) (let ((start-col (struct-find-start row root-col adj)) (string (format nil "#~S#" (gethash obj *circ-hash-table*)))) (struct-record-position row (+ (+ start-col adj) (length string))) (list 'msg row (+ start-col adj) string))) ;;; Support functions. (defun struct-find-start (row root-col adj) (max root-col (- (+ *inter-atom-h-spacing* (aref *line-endings* row)) adj))) (defun struct-find-adj (row col adj size) (let* ((line-end (max 0 (+ *inter-atom-h-spacing* (aref *line-endings* row)))) (newadj (- line-end (- col (max size adj))))) (max adj (min (max newadj 0) size)))) (defun struct-record-position (row end-col) (setf (aref *line-endings* row) end-col)) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; ;;; SDRAW-LOOP and subordinate definitions. (defparameter *sdraw-loop-prompt-string* "S> ") (defun sdraw-loop () "Read-eval-print loop using sdraw to display results." (clear-window) (clear-term) (format t "Type any Lisp expression, or :ABORT or ^C to exit.~%") (unwind-protect (sdl1) (reset-terminal))) (defun sdl1 () (loop (setup-terminal) (princ *sdraw-loop-prompt-string*) (send *terminal-io* :set-cursorpos 3 2) (clear-input *terminal-io*) (multiple-value-bind (form error) (ignore-errors (read)) (terpri *terminal-io*) (cond (error (display-sdl-error error)) (t (setf +++ ++ ++ + + - - form))) (if (equal form :abort) (return)) (multiple-value-bind (result error) (ignore-errors (eval form)) (cond (error (display-sdl-error error)) (t (setf /// // // / / result) (display-sdl-result result))))))) (defun display-sdl-result (result) (let* ((*print-circle* (if (boundp '*sdraw-print-circle*) *sdraw-print-circle* *print-circle*)) (*print-length* nil) (*print-level* nil) (*print-pretty* nil) (full-text (format nil "Result: ~S" result)) (text (if (> (length full-text) *sdraw-display-width*) (string-append (subseq full-text 0 (- *sdraw-display-width* 4)) "...)") full-text))) (sdraw result) (when (consp result) (send *terminal-io* :set-cursorpos 0 0) (format t "~A" text)) (terpri))) (defun display-sdl-error (error) (format t "~A~%~%" error)) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; ;;; SCRAWL and subordinate definitions. (defparameter *scrawl-prompt-string* "SCRAWL> ") (defvar *scrawl-object* nil) (defvar *scrawl-current-obj*) (defvar *extracting-sequence* nil) (defun scrawl (obj) "Read-eval-print loop to travel through list" (setup-terminal) (clear-window) (setf *scrawl-object* obj) (setf *scrawl-current-obj* obj) (setf *extracting-sequence* nil) (sdraw obj) (display-message "Crawl through list, 'Q' to quit, 'H' for help" 0. 21.) (scrawl1) (reset-terminal) ) (defun scrawl1 () (loop (set-term-pos 5. 22.) (let ((prompt *scrawl-prompt-string*)) (princ prompt) (set-term-pos (+ 5. (length prompt)) 22.)) (let ((command (read-uppercase-char))) (clear-term) (case command (#\A (scrawl-car-cmd)) (#\D (scrawl-cdr-cmd)) (#\B (scrawl-back-up-cmd)) (#\S (scrawl-start-cmd)) (#\H (display-scrawl-help)) (#\Q (return)) (t (display-scrawl-error)))))) (defun scrawl-car-cmd () (cond ((consp *scrawl-current-obj*) (push 'car *extracting-sequence*) (setf *scrawl-current-obj* (car *scrawl-current-obj*)) (display-scrawl-result)) (t (display-message "Can't take CAR or CDR of an atom. Use B to back up." 0. 19.)))) (defun scrawl-cdr-cmd () (cond ((consp *scrawl-current-obj*) (push 'cdr *extracting-sequence*) (setf *scrawl-current-obj* (cdr *scrawl-current-obj*)) (display-scrawl-result)) (t (display-message "Can't take CAR or CDR of an atom. Use B to back up." 0. 19.)))) (defun scrawl-back-up-cmd () (cond (*extracting-sequence* (pop *extracting-sequence*) (setf *scrawl-current-obj* (extract-obj *extracting-sequence* *scrawl-object*)) (display-scrawl-result)) (t (display-message "Already at beginning of object." 0. 19.)))) (defun scrawl-start-cmd () (setf *scrawl-current-obj* *scrawl-object*) (setf *extracting-sequence* nil) (display-scrawl-result)) (defun extract-obj (seq obj) (reduce #'funcall seq :initial-value obj :from-end t)) (defun get-car/cdr-string () (if (null *extracting-sequence*) (format nil "'~S" *scrawl-object*) (format nil "(c~Ar '~S)" (apply #'string-append (mapcar #'(lambda (x) (case x (car "a") (cdr "d"))) *extracting-sequence*)) *scrawl-object*))) (defun display-scrawl-result (&aux (*print-pretty* nil) (*print-length* nil) (*print-level* nil) (*print-circle* t)) (let* ((extract-string (get-car/cdr-string)) (text (if (> (length extract-string) *sdraw-display-width*) (string-append (subseq extract-string 0 (- *sdraw-display-width* 4)) "...)") extract-string))) (clear-window) (sdraw *scrawl-current-obj*) (display-message text 0. 18.))) (defun display-scrawl-help () (display-message "Legal commands: A)car D)cdr B)back up" 0. 20.) (display-message " S)start Q)quit H)help" 0. 21.)) (defun display-scrawl-error () (display-message "Illegal command." 0. 19.) (display-scrawl-help)) (defun read-uppercase-char () (let ((in (send *terminal-io* :read-char))) (char-upcase in))) (defun display-message (msg col row) (set-term-pos col (- row 18)) (princ msg)) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;; ;;; Everything below this line is specific to the ;;; "Golden Common Lisp" implementation, and is not ;;; referenced directly by SDRAW.LISP. The only exception ;;; is DRAW-STRUCTURE (called by SDRAW). (defvar *cons-string* '(222. 219. 222. 219.)) (defvar *cons-cell-flatsize* 4.) (defvar *cons-h-arrowshaft* 196.) (defvar *cons-h-arrowhead* 62.) (defvar *cons-v-line* 179.) (defvar *cons-v-arrowhead* 245.) (defvar *window* (make-window-stream :left 0 :top 0 :width 80. :height 19.)) (defvar sys::*monitor-is-color*) (defconstant normal-att (if sys::*monitor-is-color* #x0f #x07)) (defconstant cons-att (if sys::*monitor-is-color* #x0b normal-att)) (defconstant msg-att (if sys::*monitor-is-color* #x0e normal-att)) (defmacro with-attribute ((att &optional (stream '*terminal-io*)) &body body) `(let ((oldatt (send ,stream :attribute))) (unwind-protect (progn (send ,stream :set-attribute ,att) . ,body) (send ,stream :set-attribute oldatt)))) (defun setup-terminal () (send *terminal-io* :set-position 0 19.) (send *terminal-io* :set-size 80. 6.) (send *terminal-io* :set-cursorpos 0 2)) (defun reset-terminal () (send *terminal-io* :set-position 0 0) (send *terminal-io* :set-size 80. 25.) (send *terminal-io* :set-cursorpos 79. 24.) (terpri)) (defun clear-term () (send *terminal-io* :clear-screen)) (defun set-term-pos (x y) (send *terminal-io* :set-cursorpos x y)) (defun write-window (x) (write-char (character x) *window*)) (defun set-window-pos (x y) (send *window* :set-cursorpos x y)) (defun clear-window () (send *window* :clear-screen)) (defun draw-structure (directions) (when *sdraw-leading-arrow* (draw-leading-arrow)) (follow-directions directions)) (defun draw-leading-arrow () (set-window-pos 0 0) (dotimes (i (1- *leading-arrow-length*)) (write-window *cons-h-arrowhead*)) (write-window *cons-h-arrowshaft*)) (defun follow-directions (dirs &optional is-car) (case (car dirs) (cons (draw-cons dirs)) ((atom msg) (draw-msg dirs is-car)))) (defun draw-cons (obj) (let* ((row (second obj)) (col (third obj)) (car-component (nth 3 obj)) (cdr-component (nth 4 obj)) (string (nth 5 obj)) (h-arrow-start (+ col *cons-cell-flatsize*)) (h-arrowhead-col (1- (third cdr-component))) (cdr-string? (if (eq 'cons (first cdr-component)) (nth 5 cdr-component) (nth 4 cdr-component)))) (if cdr-string? (decf h-arrowhead-col (length cdr-string?))) (set-window-pos (- col (length string)) row) (with-attribute (cons-att *window*) (when string (send *window* :write-string string)) (mapc #'write-window *cons-string*) (do ((i h-arrow-start (1+ i))) ((>= i h-arrowhead-col)) (write-window *cons-h-arrowshaft*)) (write-window *cons-h-arrowhead*) (set-window-pos (1+ col) (+ row 1)) (write-window *cons-v-line*) (set-window-pos (1+ col) (+ row 2)) (write-window *cons-v-arrowhead*)) (follow-directions car-component t) (follow-directions cdr-component nil))) (defun draw-msg (obj is-car) (let ((row (second obj)) (col (third obj)) (string (nth 3 obj)) (circ-string (nth 4 obj))) (with-attribute (msg-att *window*) (set-window-pos (+ col (if (and is-car (<= (length string) *cons-v-arrow-offset-threshold*)) *cons-v-arrow-offset-value* 0)) row) (when circ-string (send *window* :write-string string)) (send *window* :write-string string))))