This photo shows where the injection tube meets the top of the skimmer
box. The perspective is a little bit weird in this photo, so let
me explain. We're looking up through the bottom of the skimmer
box. The surface that the injection tube is glued to is the top of
the skimmer box. We're looking at the under side of the top of the
skimmer box.
I would explain how I trimmed out the portion of the injection tube
that was inside the skimmer box, but you don't need to know that
information, because you will build your skimmer correct in the
first place.
Add or View Comments
Chris Paris
Last modified: Thu Jan 18 21:43:59 Eastern Standard Time 2001