\begindata{text822, 0} Return-path: X-Andrew-Authenticated-as: 1447;andrew.cmu.edu;Gary Keim Received: from rascal.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Mon, 2 Aug 1993 14:19:30 -0400 (EDT) Received: from rascal.andrew.cmu.edu via qmail ID ; Mon, 2 Aug 1993 14:13:53 -0400 (EDT) Received: from Messages.8.5.N.CUILIB.3.45.SNAP.NOT.LINKED.rascal.andrew.cmu.edu.rs.aix32 via MS.5.6.rascal.andrew.cmu.edu.rs_aix3; Mon, 2 Aug 1993 14:13:53 -0400 (EDT) Message-ID: Date: Mon, 2 Aug 1993 14:13:53 -0400 (EDT) From: Gary Keim X-Andrew-Message-Size: 646+0 Content-Type: X-BE2; 12 If-Type-Unsupported: send To: Info-Andrew Subject: Install rules \begindata{text,539886824} \textdsversion{12} \template{messages} Currently the AUIS install rules depend on the source file and install.time -- no the destination file: \smaller{#define InstallFileToFile(file, mode, destfile) @@\\ install.time:: file @@\\ $(INSTALL) mode file destfile } We propose making the rule depend upon destfile as well: \smaller{#define InstallFileToFile(file, mode, destfile) @@\\ install.time:: file destfile @@\\ $(INSTALL) mode file destfile } The effect of this change will be that if the destination file has either changed or been removed, the source file will be reinstalled. Does anyone know of a good reason that we should not make this change? -Gary Keim Andrew Consortium \enddata{text,539886824} \enddata{text822, 0} \begindata{text822, 1843} Return-path: X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from po5.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Mon, 2 Aug 1993 15:52:34 -0400 (EDT) Received: from po5.andrew.cmu.edu via qmail ID ; Mon, 2 Aug 1993 15:51:52 -0400 (EDT) If-Type-Unsupported: send Received: from po5.andrew.cmu.edu via qmail ID ; Mon, 2 Aug 1993 15:48:55 -0400 (EDT) Received: from research.att.com (research.att.com [192.20.225.2]) by po5.andrew.cmu.edu (8.5/8.5) with SMTP id PAA20117; Mon, 2 Aug 1993 15:48:48 -0400 Received: by inet; Mon Aug 2 15:47 EDT 1993 Received: from Messages.8.5.N.CUILIB.3.45.SNAP.NOT.LINKED.fugue.sun4.41 via MS.5.6.fugue.sun4_41; Mon, 2 Aug 1993 15:47:17 -0400 (EDT) Message-Id: Date: Mon, 2 Aug 1993 15:47:17 -0400 (EDT) From: Chip Christian Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII To: info-andrew+@andrew.cmu.edu Subject: address validation Our nameservers don't know anything outside of att.com. How can I get messages to stop trying to validate the host when I send mail? I'm running andrew 5.1 on a sun4, sunos4.1.3. \enddata{text822, 1843} \begindata{text822, 3420} Return-path: X-Andrew-Authenticated-as: 1447;andrew.cmu.edu;Gary Keim Received: from rascal.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Mon, 2 Aug 1993 17:08:01 -0400 (EDT) Received: from rascal.andrew.cmu.edu via qmail ID ; Mon, 2 Aug 1993 17:07:14 -0400 (EDT) Received: from Messages.8.5.N.CUILIB.3.45.SNAP.NOT.LINKED.rascal.andrew.cmu.edu.rs.aix32 via MS.5.6.rascal.andrew.cmu.edu.rs_aix3; Mon, 2 Aug 1993 17:07:13 -0400 (EDT) Message-ID: <4gLM81u00WohJfpUcK@andrew.cmu.edu> Date: Mon, 2 Aug 1993 17:07:13 -0400 (EDT) From: Gary Keim X-Andrew-Message-Size: 1179+0 Content-Type: X-BE2; 12 If-Type-Unsupported: send To: Info-Andrew Subject: address validation \begindata{text,539513496} \textdsversion{12} \template{messages} \excerptedcaption{Excerpts from misc: 2-Aug-93 address validation Chip Christian@allegra.a (182*)} \quotation{Our nameservers don't know anything outside of att.com. }\quotation{How can I get messages to stop trying to validate the host }\quotation{when I send mail? I'm running andrew 5.1 on a sun4, }\quotation{sunos4.1.3. } From the \italic{setup} help topic: \section{Address Validation} \indent{The process of validating mail is site-dependent, and may be controlled by the following options. There are two things that can be validated: names of remote hosts and local addresses. When a user types a destination address and sends a message, the messageserver tries to "validate" the address to make sure that it is a valid mail address before handing it off to the delivery system. This informs the user immediately of some common kinds of address errors. }\leftindent{ \bold{Remote Host Name Validation} \italic{AMS_ValidateDestHosts: boolean }\leftindent{Default: yes "Yes" specifies that some form of hostname validation takes place. "No" specifies that all forms of hostname validation are turned off. If the value is set to "no," all other hostname validation options are irrelevant.} } Add the following to your site \typewriter{AndrewSetup} file: AMS_ValidateDestHosts: no -Gary Keim Andrew Consortium \enddata{text,539513496} \enddata{text822, 3420} \begindata{text822, 5945} Return-path: X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from po3.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Tue, 3 Aug 1993 10:48:56 -0400 (EDT) Received: from po5.andrew.cmu.edu via qmail ID ; Tue, 3 Aug 1993 10:45:27 -0400 (EDT) ReSent-Message-ID: Received: from neptun.kapsch.co.at (neptun.kapsch.co.at [148.198.8.4]) by po5.andrew.cmu.edu (8.5/8.5) with SMTP id KAA06238; Tue, 3 Aug 1993 10:44:31 -0400 Resent-From: @neptun.kapsch.co.at:fodatec@harare.kapsch.co.at Resent-Date: Tue, 3 Aug 1993 16:43 MET Received: from harare.kapsch.co.at [148.198.10.5] by neptun.kapsch.co.at with SMTP-OpenVMS via TCP/IP; Tue, 3 Aug 1993 16:43 MET Received: by harare.kapsch.co.at (4.1/SMI-4.1) id AA23150; Tue, 3 Aug 93 16:44:11 +0200 Received: from Messages.7.15.N.CUILIB.3.45.SNAP.NOT.LINKED.harare.kapsch.co.at.sun4.41 via MS.5.6.harare.kapsch.co.at.sun4_41; Tue, 3 Aug 1993 16:44:10 +0200 (MET DST) Message-Id: Date: Tue, 3 Aug 1993 16:44:10 +0200 (MET DST) From: Fodatec Project To: info-andrew@andrew.cmu.edu Subject: Current Insertion Style I want to build menuentries which give a certain style to - a textportion if one is selected - to the subsequently typed in text ("Current Insertion Style"). The first point is no problem. With the second point I did not succeed yet. You will probalbly ask me why I don't use the build in styles. (styeMenu and Stylesheet in the textclass) Answer: I cannot because we have some special stylesheet where some styles have no meaning for ATK. As well the whole stylesheet changes dynamically. So I get problems with the updating of the menus which can't be controlled. For instance if you use the built in Stylesheet mechanism for creating menucards. If you change the stylesheeet on the run everything works fine, all traceoutputs are ok - BUT the menucard is still the same showing old entries wich behave like the new ones should. So I built up a menu of my own (where I had to recode many things already there in other classes - which should not occur in a class system) because menucards don't follow inheritance. The only thing I didn't get around was the second point from above. It should be possible to set a current insertion style like it can be done in ez, when you choose a style without marking a region. Unfortunaltely these "methods" are not only not inherited but even worse are full of side effects, so I can't even port them to my code. Beside that there are no comments and no documentation. So has anybody some idea how I can code the second feature from above? Thanks Christian.Sodomka@kapsch.co.at \enddata{text822, 5945} \begindata{text822, 9023} Return-path: X-Andrew-Authenticated-as: 8779;andrew.cmu.edu;Andrew C. Plotkin Received: from orac.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Tue, 3 Aug 1993 18:29:05 -0400 (EDT) Received: from orac.andrew.cmu.edu via qmail ID ; Tue, 3 Aug 1993 18:26:59 -0400 (EDT) Received: from Messages.8.5.N.CUILIB.3.45.SNAP.NOT.LINKED.orac.andrew.cmu.edu.pmax.ul4 via MS.5.6.orac.andrew.cmu.edu.pmax_ul4; Tue, 3 Aug 1993 18:26:59 -0400 (EDT) Message-ID: Date: Tue, 3 Aug 1993 18:26:59 -0400 (EDT) From: "Andrew C. Plotkin" To: Info-Andrew Subject: Windows vs. Processes Excerpts from mail: 30-Jul-93 Re: hyplink patch Wilfred.Hansen@cs.cmu.ed (1428+0) > I have always wondered why we have both Quit and DeleteWindow; it seems > overly didactic and programmerly to insist that users distinguish > processes from windows, even though the system does. I propose to > eliminate the difference and change "Quit" to "Quit Window". There > would then be no way to kill an application except to quit all its > windows. When Quitting the last window for a process, a dialog box > appears asking if the user is happy with that. (Sigh. I suppose there > must be a preference that retains the old behavior.) So, Dear Members, this leaves us with a question: how do we deal with this? Currently, the interface is not quite consistent: the raster toolbox and figure toolbox have "Quit" menu options which really only delete the toolbox windows. (My fault -- I wasn't thinking of consistency when I wrote them.) This issue is complicated by the fact that one process may support (or seem to support) different kinds of applications. A piece of mail may contain a link which brings up a new buffer; should the buffer act as a separate ez window, with its own Quit Window option, and possibly outlive messages? Really, it should be possible to run new applications from an already-running runapp, and have then act the same as if they were starting from a fresh runapp. I have wanted to do this for a long time, but there are deeply-buried annoyances which make it hard. Thoughts? (None of this would be implemented in the next release in any case; any changes would be in the C++ version.) --Z "And Aholibamah bare Jeush, and Jaalam, and Korah: these were the borogoves..." \enddata{text822, 9023} \begindata{text822, 11748} Return-path: X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Tue, 3 Aug 1993 21:49:48 -0400 (EDT) Received: from po3.andrew.cmu.edu via qmail ID ; Tue, 3 Aug 1993 21:48:42 -0400 (EDT) Received: from alpha.xerox.com (alpha.Xerox.COM [13.1.64.93]) by po3.andrew.cmu.edu (8.5/8.5) with SMTP id VAA29869; Tue, 3 Aug 1993 21:48:36 -0400 Received: from holmes.parc.xerox.com ([13.1.100.162]) by alpha.xerox.com with SMTP id <13514>; Tue, 3 Aug 1993 18:48:14 PDT Received: by holmes.parc.xerox.com id <16165>; Tue, 3 Aug 1993 18:48:05 -0700 Received: from Messages.7.15.N.CUILIB.3.45.SNAP.NOT.LINKED.holmes.parc.xerox.com.sun4.41 via MS.5.6.holmes.parc.xerox.com.sun4_41; Tue, 3 Aug 1993 18:47:58 -0700 (PDT) Message-ID: Date: Tue, 3 Aug 1993 18:47:58 PDT Sender: Bill Janssen From: Bill Janssen X-Andrew-Message-Size: 502+0 Content-Type: X-BE2; 12 If-Type-Unsupported: send To: Info-Andrew , "Andrew C. Plotkin" Subject: Re: Windows vs. Processes In-Reply-To: References: \begindata{text,3314568} \textdsversion{12} \template{messages} \define{global } I made this change a long time ago here. I also added a new procedure that one could bind to "Kill" in their own init files, if they wanted to, which gave the old "Quit" behavior. Everyone seemed to like it much better. \excerptedcaption{Excerpts from ext.andrew: 3-Aug-93 Windows vs. Processes "Andrew C. Plotkin"@andr (1713)} \quotation{A piece of mail may }\quotation{contain a link which brings up a new buffer; should the buffer act as a }\quotation{separate ez window, with its own Quit Window option, and possibly }\quotation{outlive messages? } Yes. Bill \enddata{text,3314568} \enddata{text822, 11748} \begindata{text822, 14060} Return-path: X-Andrew-Authenticated-as: 1447;andrew.cmu.edu;Gary Keim Received: from rascal.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Mon, 9 Aug 1993 18:26:23 -0400 (EDT) Received: from rascal.andrew.cmu.edu via qmail ID ; Mon, 9 Aug 1993 18:22:10 -0400 (EDT) Received: from Messages.8.5.N.CUILIB.3.45.SNAP.NOT.LINKED.rascal.andrew.cmu.edu.rs.aix32 via MS.5.6.rascal.andrew.cmu.edu.rs_aix3; Mon, 9 Aug 1993 18:22:10 -0400 (EDT) Message-ID: <8gNgsGa00Woh0qBkMG@andrew.cmu.edu> Date: Mon, 9 Aug 1993 18:22:10 -0400 (EDT) From: Gary Keim X-Andrew-Message-Size: 1403+1 Content-Type: X-BE2; 12 If-Type-Unsupported: send To: Info-Andrew Subject: Re: "ez lite" ? In-Reply-To: <23v1lqINNogk@darkstar.UCSC.EDU> References: <23v1lqINNogk@darkstar.UCSC.EDU> Distribution: inet \begindata{text,539769224} \textdsversion{12} \template{messages} \define{footnote attr:[Flags OverBar Int Set] attr:[FontSize PreviousFontSize Point -2]} \excerptedcaption{Excerpts from netnews.comp.soft-sys.andrew: 7-Aug-93 "ez lite" ? Philip Brown@cats.ucsc.e (914)} \quotation{So.. I would like to know if there is an "ez-lite" program or equivalent }\quotation{somewhere. Or some method I don't know about that would let me compile }\quotation{and install things using only 20 megs of disk. (ideally, the installed }\quotation{thing would take LESS than 20 megs!!!) } Someting like an EZLite\footnote{\ \begindata{fnote,539900616} \textdsversion{12} taste great, less filling\ \enddata{fnote,539900616} \view{fnotev,539900616,18,0,0}} is in the works. On the build front, you can shrink what's installed by #undef'ing these tokens in config/site.h: #undef AMS_ENV #undef METAMAIL_ENV #undef CONTRIB_ENV #undef MK_HELP #undef MK_BASIC_INSETS #undef MK_BLD_BLKS #undef MK_TEXT_EXT ... and rebuilding into a clean destination directory. If you do this, let me know the final size. So, you bring over all 60 Meg of sources but you really only want a text editor. What's a guy to do? After running imake at the top-level of the sources, make all the Makefiles and remove everthing under the directories that you don't need: % \bold{imake ...} %\bold{ make Makefiles} % \bold{foreach trashit (ams atkams contrib atk/help atk/ness atk/table atk/console atk/apt atk/bush atk/value atk/preview atk/org atk/eq atk/ezprint atk/chart atk/calc atk/toez)} > \bold{echo ... trashing $trashit} > \bold{rm -rf $trashit/*} > \bold{echo depend world World Install dependInstall:: > $trashit/Makefile} > \bold{cp $trashit/Makefile $trashit/Imakefile} > \bold{end} ... then resume the build process. -Gary Keim Andrew Consortium \enddata{text,539769224} \enddata{text822, 14060} \begindata{text822, 17137} Return-path: X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from po5.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Wed, 18 Aug 1993 18:53:05 -0400 (EDT) Received: from po2.andrew.cmu.edu via qmail ID ; Wed, 18 Aug 1993 18:52:36 -0400 (EDT) If-Type-Unsupported: send Received: from po2.andrew.cmu.edu via qmail ID ; Wed, 18 Aug 1993 18:48:46 -0400 (EDT) Received: from relay2.UU.NET (relay2.UU.NET [192.48.96.7]) by po2.andrew.cmu.edu (8.5/8.5) with SMTP id SAA15476; Wed, 18 Aug 1993 18:48:41 -0400 Received: from welch.ncd.com by relay2.UU.NET with SMTP (5.61/UUNET-internet-primary) id AA07184; Wed, 18 Aug 93 14:55:50 -0400 Received: from rosebud.ncd.com by welch.ncd.com (4.1/SMI-4.1/Brent-NCD-Welch-930602) id AA26433; Wed, 18 Aug 93 11:55:43 PDT Received: from porter. ncd.com by rosebud.ncd.com (4.1/SMI-4.1/Brent-NCD-Rosebud-930602) id AA19063; Wed, 18 Aug 93 11:55:39 PDT Received: by porter. ncd.com (1.37.109.4/SMI-4.1) id AA13854; Wed, 18 Aug 93 11:57:34 -0700 Received: from Messages.8.5.N.CUILIB.3.45.SNAP.NOT.LINKED.porter.HP9000.705 via MS.5.6.porter.hp700; Wed, 18 Aug 1993 11:57:33 -0700 (PDT) Message-Id: <0gQbiR0000000pyEU0@porter> Date: Wed, 18 Aug 1993 11:57:33 -0700 (PDT) From: Kris Olander Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII To: info-andrew@andrew.cmu.edu Subject: flock problems on HP-UX and Messages Cc: Kris Olander I recently have run into a problem with v8.5 of Messages running on a HP700 system at HP-UX 9.0. Everything was fine until about a week ago. Now whenever I select a message, I get a pop up dialog box that says: Could not mark message ## as 'seen' [Send automatic bug report] [ Continue ] with a message in the footer area that says: "Error: No locks available (in flock in OpenMSDirectory)" All my files are on a Solbourne NFS file server. I have no problems editing my files on the HP host, so I don't think this is a kernel limit problem. I also get a similar message when attempting to change my Setup Options. Whenever I change some option, I get a popup box: Warning: could not rewrite your preferences file (-4, 46) [ Send auto... ] [ Continue ] and a footer message: "Error 46 (No locks available) "may" have been encountered internally." If I use 'vi ~/preferences' I don't have a problem modifying the file. -Kris Olander NCD Field Engineer \enddata{text822, 17137} \begindata{text822, 19995} Return-path: X-Andrew-Authenticated-as: 1447;andrew.cmu.edu;Gary Keim Received: from rascal.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Wed, 18 Aug 1993 19:40:40 -0400 (EDT) Received: from rascal.andrew.cmu.edu via qmail ID ; Wed, 18 Aug 1993 19:36:57 -0400 (EDT) Received: from Messages.8.5.N.CUILIB.3.45.SNAP.NOT.LINKED.rascal.andrew.cmu.edu.rs.aix32 via MS.5.6.rascal.andrew.cmu.edu.rs_aix3; Wed, 18 Aug 1993 19:36:57 -0400 (EDT) Message-ID: Date: Wed, 18 Aug 1993 19:36:57 -0400 (EDT) From: Gary Keim X-Andrew-Message-Size: 1106+0 Content-Type: X-BE2; 12 If-Type-Unsupported: send To: Info-Andrew Subject: Re: flock problems on HP-UX and Messages CC: Kris Olander In-Reply-To: <0gQbiR0000000pyEU0@porter> References: <0gQbiR0000000pyEU0@porter> \begindata{text,540109816} \textdsversion{12} \template{messages} \excerptedcaption{Excerpts from misc: 18-Aug-93 flock problems on HP-UX and.. Kris Olander@porter.ncd. (974*)} \quotation{"Error: No locks available (in flock in OpenMSDirectory)" } \quotation{All my files are on a Solbourne NFS file server. I have no problems editing }\quotation{my files on the HP host, so I don't think this is a kernel limit problem. } Messages is trying to lock a particular file that it's accessing via NFS. It isn't being granted the lock. Could be a problem on the NFS server. Are there any other messages users whose files are also on the same NFS server? If so, are they experiencing this problem? \excerptedcaption{Excerpts from misc: 18-Aug-93 flock problems on HP-UX and.. Kris Olander@porter.ncd. (974*)} \quotation{"Error 46 (No locks available) "may" have been encountered internally." } On my Snake, errno 46 is "System record lock table was full." The lock table is guaranteed to have at least 50 slots and is managed by the lockd. I'm not sure if it's the local or remote lock table that's full. That's why I asked the above question. I know this is harsh but, if you reboot the Snake, does the problem go away? -Gary keim Andrew Consortium \enddata{text,540109816} \enddata{text822, 19995} \begindata{text822, 22525} Return-path: X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Thu, 26 Aug 1993 12:31:59 -0400 (EDT) Received: from po5.andrew.cmu.edu via qmail ID ; Thu, 26 Aug 1993 12:30:37 -0400 (EDT) If-Type-Unsupported: send Received: from po3.andrew.cmu.edu via qmail ID ; Thu, 26 Aug 1993 12:29:04 -0400 (EDT) Received: from cns.cscns.com (cns.cscns.com [192.156.196.1]) by po3.andrew.cmu.edu (8.5/8.5) with SMTP id MAA11932; Thu, 26 Aug 1993 12:29:00 -0400 Received: from mass.UUCP by cns.cscns.com (4.1/SMI-4.1) id AA06550; Thu, 26 Aug 93 10:30:26 MDT Received: by mass.mass.com (Smail3.1.28.1 #6) id m0oVjeF-00035DC; Thu, 26 Aug 93 09:54 MDT Message-Id: From: mjones@mass.com Subject: unsubscribe To: info-andrew@andrew.cmu.edu Date: Thu, 26 Aug 1993 09:54:02 -0700 (MDT) X-Mailer: ELM [version 2.4 PL21] Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 568 Unsubscribe mjones@mass.com -- -------------------------------------------------------------------------------- /\ / \/\ The sense of the miracle of humanity Mountain Alternative Systems / / \ itself should be always more vivid to mjones@mass.com / / \ us than any marvels of power, / / \ intellect, art, or civilization. / / \ G.K. Chesterton \enddata{text822, 22525} \begindata{text822, 24537} Return-path: X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from po4.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Mon, 30 Aug 1993 04:32:34 -0400 (EDT) Received: from po3.andrew.cmu.edu via qmail ID ; Mon, 30 Aug 1993 04:31:52 -0400 (EDT) Received: from nchc.edu.tw (cacus.nchc.edu.tw [140.110.1.40]) by po3.andrew.cmu.edu (8.5/8.5) with SMTP id EAA13473; Mon, 30 Aug 1993 04:31:39 -0400 From: a00chc00@nchc.edu.tw Received: by nchc.edu.tw (th3.8s.nchc) from ceres.nchc.edu.tw id AA02337; Mon, 30 Aug 93 16:29:54 CST Received: by ceres.nchc.edu.tw (4.1/SMI-4.1) id AA05608; Mon, 30 Aug 93 16:29:54 CST Date: Mon, 30 Aug 93 16:29:54 CST Message-Id: <9308300829.AA05608@ceres.nchc.edu.tw> To: info-andrew@andrew.cmu.edu Subject: Installation Problem?? I tried to install Andrew software and got the following error message: ---------------------------------------------------------------------------- elc% cd /usr/local/contrib/lib/andrew elc% xmkmf -a mv Makefile Makefile.bak imake -DUseInstalled -I/usr/local/X11R5/lib/X11/config make Makefiles make: Fatal error in reader: Makefile, line 314: Unexpected end of line seen ----------------------------------------------------------------------------- Have any clue what I might have done wrong?? Thank you in advance!! charlie \enddata{text822, 24537} \begindata{text822, 26188} Return-path: X-Andrew-Authenticated-as: 1210;alw.nih.gov;Bob Dew Received: from kirin.dcrt.nih.gov via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl@andrew.cmu.edu) ID ; Mon, 30 Aug 1993 10:16:20 -0400 (EDT) Received: from kirin.dcrt.nih.gov via qmail ID ; Mon, 30 Aug 1993 10:16:09 -0400 (EDT) If-Type-Unsupported: send Received: from kirin.dcrt.nih.gov via qmail ID ; Mon, 30 Aug 1993 10:14:54 -0400 (EDT) Received: from dude.dcrt.nih.gov via qmail ID ; Mon, 30 Aug 1993 10:13:21 -0400 (EDT) Received: from dude.dcrt.nih.gov via qmail ID ; Mon, 30 Aug 1993 10:13:15 -0400 (EDT) Received: from Messages.8.5.N.CUILIB.3.45.SNAP.NOT.LINKED.dude.dcrt.nih.gov.sun4c.411 via MS.5.6.dude.dcrt.nih.gov.sun4_41; Mon, 30 Aug 1993 10:13:14 -0400 (EDT) Message-ID: Date: Mon, 30 Aug 1993 10:13:14 -0400 (EDT) From: Bob Dew X-Andrew-Message-Size: 243+0 Content-Type: X-BE2; 12 To: Info-Andrew , a00chc00@nchc.edu.tw Subject: Re: Installation Problem?? In-Reply-To: <9308300829.AA05608@ceres.nchc.edu.tw> References: <9308300829.AA05608@ceres.nchc.edu.tw> \begindata{text,1894048} \textdsversion{12} \template{messages} This is purely a guess, but certain platforms (eg, the RS6000, I think) complain as you've described when tabs are used in imake configuration files. If you've used tabs in site.h or site.mcr, you might try replacing them with spaces. -Bob \enddata{text,1894048} \enddata{text822, 26188} \begindata{text822, 28284} Return-path: X-Andrew-Authenticated-as: 5904;andrew.cmu.edu;Robert Andrew Ryan Received: from atk.itc.cmu.edu via trymail for info-andrew+@andrew.cmu.edu (->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-nostrip.dl) ID ; Mon, 30 Aug 1993 11:44:13 -0400 (EDT) Received: from atk.itc.cmu.edu via qmail ID ; Mon, 30 Aug 1993 11:43:59 -0400 (EDT) Received: from Messages.8.5.N.CUILIB.3.45.SNAP.NOT.LINKED.atk.itc.cmu.edu.rs.aix31 via MS.5.6.atk.itc.cmu.edu.rs_aix3; Mon, 30 Aug 1993 11:43:58 -0400 (EDT) Message-ID: Date: Mon, 30 Aug 1993 11:43:58 -0400 (EDT) From: Robert Andrew Ryan To: Info-Andrew , a00chc00@nchc.edu.tw Subject: Re: Installation Problem?? CC: Bulletin Board Administration In-Reply-To: <9308300829.AA05608@ceres.nchc.edu.tw> References: <9308300829.AA05608@ceres.nchc.edu.tw> Excerpts from internet.other.info-andrew: 30-Aug-93 Installation Problem?? a00chc00@nchc.edu.tw (534) > elc% cd /usr/local/contrib/lib/andrew > elc% xmkmf -a > mv Makefile Makefile.bak > imake -DUseInstalled -I/usr/local/X11R5/lib/X11/config > make Makefiles > make: Fatal error in reader: Makefile, line 314: Unexpected end of line seen Please read at least the Quick Start instructions in the README. ATK does not use the X imake configuration files (hence xmkmf doesn't generate a working imakefile). -Rob Ryan Andrew Consortium \enddata{text822, 28284}