Newsgroups: comp.robotics
Path: brunix!news.Brown.EDU!agate!howland.reston.ans.net!wupost!decwrl!decwrl!netcomsv!netcom.com!markdahl
From: markdahl@netcom.com (Mark Dahlen)
Subject: Getting 16 Relay outputs from a PC
Message-ID: <markdahlCLpMBt.495@netcom.com>
Organization: NETCOM On-line Communication Services (408 241-9760 guest)
Distribution: usa
Date: Thu, 24 Feb 1994 03:43:04 GMT
Lines: 11


I'm in great need for 16 or more Relay outputs from a PC running Qbasic.  
The use would be to control motors and lights for a little robot that I'm 
building.   I'd go out and purchase a board for around $150, but I'd 
rather just see if I can make one for less.  It could use the serial port 
or the parallel port.  The relays need to be at least 10 amp rating.   

		If anyone knows how to do this, please leave me 
		a message at markdahl@netcom.com 

Thanks in advance
