Newsgroups: comp.robotics
Path: brunix!sgiblab!darwin.sura.net!howland.reston.ans.net!news.ans.net!newsgate.watson.ibm.com!watnews.watson.ibm.com!sernews!news
From: charlieb@charliebx.bocaraton.ibm.com (Charlie Bustamante)
Subject: Re: Parallel ports and servo control
Sender: news@sernews.raleigh.ibm.com
Message-ID: <CLnHqA.E8L@sernews.raleigh.ibm.com>
Date: Wed, 23 Feb 1994 00:08:34 GMT
Lines: 21
Reply-To: charlieb@vnet.ibm.com
References: <mVPT7R.Y5@asic.sc.ti.com>
Nntp-Posting-Host: charliebx.bocaraton.ibm.com
Organization: IBM Corporation, Boca Raton, Fl U.S.A.
X-Newsreader: IBM NewsReader/2 v1.00

In <mVPT7R.Y5@asic.sc.ti.com>, jdrummon@phantom.asic.sc.ti.com (John Drummond) writes:
>  Here is a program that will control up to six model servo's
>with the parallel port of your PC.  A minimum of external 
>parts is reqiuired, one LS245.  Instructions are included on
>how to construct the parallel port buffer.  The function keys
>control the servo motion.  All the required waveform timing 
>is done by the PC.  The C source code is included for your
>amusement.
>

Please repost,  I tried to unzip and I fails telling me to try pkzipfix.exe.
When I did pkzipfix and then tried to pkunzip I got a CRC error.  So I saved 
the article a second time to make sure the error was not on my side.  It failed
again.   Please repost this article.

------ ______________________________________________________________ -------
----- /\ Charlie Bustamante        ... In balmy Boca Raton, Fl   USA \ ------
---- /  \                                                             \ -----
--- /    \ internet: charlieb@vnet.ibm.com        Phone: (407)443\8114 \ ----
-- /______\ opinions are mine                        Fax: (407)982\9707 \ ---
---------- \_____________________________________________________________\ --

