Frogman


Project Description

Shape Deposition Manufacturing (SDM) integrates material addition processes with material removal processes. Individual layer segments are deposited as near-net shapes, then accurately machined to net-shape, with a CNC mill, before depositing additional material. Each layer is composed of primary material(s) and complementary shaped sacrificial supporting material which is removed when the part is completed. At selected layers, prefabricated components can be placed on the current upper surface before subsequent deposition takes place, thus permanently embedding the component.

Several alternative material deposition processes are available for SDM. Embedded electronic devices are built up with polyurethanes, to form the housings, and sacrificial wax which is removed by melting. Polyurethanes are deposited as 2 part resin/activator mixtures, while the wax is deposited with a hot-glue gun. The parts are built on pallets which are transferred from station to station using robotic automation.

Frogman is a three layer polyurethane structure, which was manufactured as one underwater computer built up in layers of polyurethane.

In order to connect to a heads up display, a commercially available vulcanized underwater connector (i.e. mating plug can be connected/disconnected underwater) is used. Since polyurethane will not bond to rubber, a polyurehane clamp with an internal O-ring is first bonded around the cable connection from the connector to the PCB. Tape is also placed on the connector face to protect it from subsequent deposition. The connector is then placed on a polyurethane layer and embedded in the next layer. In operation, water which penetrates between polyurethane/rubber interface is stopped at the embedded clamp.


Last updated on 19 July 1997