Newsgroups: ba.market.misc,ba.market.computers,misc.forsale Path: cantaloupe.srv.cs.cmu.edu!crabapple.srv.cs.cmu.edu!fs7.ece.cmu.edu!europa.eng.gtefsd.com!howland.reston.ans.net!bogus.sura.net!news-feed-1.peachnet.edu!umn.edu!csus.edu!netcom.com!scherf From: scherf@netcom.com (Steve Scherf) Subject: FOR SALE: Altos 2000 Unix machine Message-ID: Organization: Moondog Software, Sunnyvale, CA. Date: Thu, 22 Apr 1993 02:13:33 GMT Lines: 273 I have an Altos 2000 System V.3 Unix system for sale (I actually have two, but one's for me). Several years ago these well-known machines sold for $30,000 for the base configuration. This particular one has much more than the base configuration, depending on what you want: - 386 16 MHZ CPU. - 8 meg of ram. - Fifteen (15) serial ports (or more if you want)! - A multidrop port for up to 256 more serial ports! - Ethernet. - 5.25" floppy drive. - QIC 24 cartridge tape drive. - 170 meg ESDI hard drive (either Micropolis or CDC, or both if you want). - Unix System V.3 installation. - Networking software package (TCP/IP). - Development system software package (C compiler and libraries). I am asking only $700 (firm) for the system! If you want another Ethernet or serial card, add $50. Additional disks are $100 each (I can install a total of three ESDI drives). I would consider a trade for a SCSI DAT tape drive. This box would make a great BBS system or terminal server. It was originally designed to service 40 active users, and up to 70 moderately active users. This is NOT a PC! It was designed to be a Unix box from the start, and it's very fast and exceptionally reliable. It's dimensions are approximately 2.5' high (tower), 8" wide and 2" deep. I am only interested in dealing with someone local enough to come pick it up. Shipping is way too much hassle. Call if you wish, or send email. Steve Scherf (408) 736-2093 home (408) 559-5616 work steve@moonsoft.com scherf@swdc.stratus.com Newsgroups: ba.market.misc,ba.market.computers,misc.forsale,misc.forsale.computers,misc.forsale.computers.other Subject: FOR SALE: Altos 2000 Unix machine Summary: Expires: References: Sender: Followup-To: Distribution: Organization: Moondog Software, Sunnyvale, CA. Keywords: I have an Altos 2000 System V.3 Unix system for sale (I actually have two, but one's for me). Several years ago these well-known machines sold for $30,000 for the base configuration. This particular one has much more than the base configuration, depending on what you want: - 386 16 MHZ CPU. - 8 meg of ram. - Fifteen (15) serial ports (or more if you want)! - A multidrop port for up to 256 more serial ports! - Ethernet. - 5.25" floppy drive. - QIC 24 cartridge tape drive. - 170 meg ESDI hard drive (either Micropolis or CDC, or both if you want). - Unix System V.3 installation. - Networking software package (TCP/IP). - Development system software package (C compiler and libraries). I am asking only $700 (firm) for the system! If you want another Ethernet or serial card, add $50. Additional disks are $100 each (I can install a total of three ESDI drives). I would consider a trade for a SCSI DAT tape drive. This box would make a great BBS system or terminal server. It was originally designed to service 40 active users, and up to 70 moderately active users. This is NOT a PC! It was designed to be a Unix box from the start, and it's very fast and exceptionally reliable. It's dimensions are approximately 2.5' high (tower), 8" wide and 2" deep. I am only interested in dealing with someone local enough to come pick it up. Shipping is way too much hassle. Call if you wish, or send email. Steve Scherf (408) 736-2093 home (408) 559-5616 work steve@moonsoft.com scherf@swdc.stratus.com Newsgroups: ba.market.misc,ba.market.computers,misc.forsale,misc.forsale.computers,misc.forsale.computers.other Subject: FOR SALE: Altos 2000 Unix machine Organization: Moondog Software, Sunnyvale, CA. I have an Altos 2000 System V.3 Unix system for sale (I actually have two, but one's for me). Several years ago these well-known machines sold for $30,000 for the base configuration. This particular one has much more than the base configuration, depending on what you want: - 386 16 MHZ CPU. - 8 meg of ram. - Fifteen (15) serial ports (or more if you want)! - A multidrop port for up to 256 more serial ports! - Ethernet. - 5.25" floppy drive. - QIC 24 cartridge tape drive. - 170 meg ESDI hard drive (either Micropolis or CDC, or both if you want). - Unix System V.3 installation. - Networking software package (TCP/IP). - Development system software package (C compiler and libraries). I am asking only $700 (firm) for the system! If you want another Ethernet or serial card, add $50. Additional disks are $100 each (I can install a total of three ESDI drives). I would consider a trade for a SCSI DAT tape drive. This box would make a great BBS system or terminal server. It was originally designed to service 40 active users, and up to 70 moderately active users. This is NOT a PC! It was designed to be a Unix box from the start, and it's very fast and exceptionally reliable. It's dimensions are approximately 2.5' high (tower), 8" wide and 2" deep. I am only interested in dealing with someone local enough to come pick it up. Shipping is way too much hassle. Call if you wish, or send email. Steve Scherf (408) 736-2093 home (408) 559-5616 work steve@moonsoft.com scherf@swdc.stratus.com Newsgroups: ba.market.misc,ba.market.computers,misc.forsale,misc.forsale.computers,misc.forsale.computers.other Subject: FOR SALE: Altos 2000 Unix machine Summary: Expires: References: Sender: Followup-To: Distribution: Organization: Moondog Software, Sunnyvale, CA. Keywords: I have an Altos 2000 System V.3 Unix system for sale (I actually have two, but one's for me). Several years ago these well-known machines sold for $30,000 for the base configuration. This particular one has much more than the base configuration, depending on what you want: - 386 16 MHZ CPU. - 8 meg of ram. - Fifteen (15) serial ports (or more if you want)! - A multidrop port for up to 256 more serial ports! - Ethernet. - 5.25" floppy drive. - QIC 24 cartridge tape drive. - 170 meg ESDI hard drive (either Micropolis or CDC, or both if you want). - Unix System V.3 installation. - Networking software package (TCP/IP). - Development system software package (C compiler and libraries). I am asking only $700 (firm) for the system! If you want another Ethernet or serial card, add $50. Additional disks are $100 each (I can install a total of three ESDI drives). I would consider a trade for a SCSI DAT tape drive. This box would make a great BBS system or terminal server. It was originally designed to service 40 active users, and up to 70 moderately active users. This is NOT a PC! It was designed to be a Unix box from the start, and it's very fast and exceptionally reliable. It's dimensions are approximately 2.5' high (tower), 8" wide and 2" deep. I am only interested in dealing with someone local enough to come pick it up. Shipping is way too much hassle. Call if you wish, or send email. Steve Scherf (408) 736-2093 home (408) 559-5616 work steve@moonsoft.com scherf@swdc.stratus.com Newsgroups: ba.market.misc,ba.market.computers,misc.forsale,misc.forsale.computers,misc.forsale.computers.other Subject: FOR SALE: Altos 2000 Unix machine Organization: Moondog Software, Sunnyvale, CA. I have an Altos 2000 System V.3 Unix system for sale (I actually have two, but one's for me). Several years ago these well-known machines sold for $30,000 for the base configuration. This particular one has much more than the base configuration, depending on what you want: - 386 16 MHZ CPU. - 8 meg of ram. - Fifteen (15) serial ports (or more if you want)! - A multidrop port for up to 256 more serial ports! - Ethernet. - 5.25" floppy drive. - QIC 24 cartridge tape drive. - 170 meg ESDI hard drive (either Micropolis or CDC, or both if you want). - Unix System V.3 installation. - Networking software package (TCP/IP). - Development system software package (C compiler and libraries). I am asking only $700 (firm) for the system! If you want another Ethernet or serial card, add $50. Additional disks are $100 each (I can install a total of three ESDI drives). I would consider a trade for a SCSI DAT tape drive. This box would make a great BBS system or terminal server. It was originally designed to service 40 active users, and up to 70 moderately active users. This is NOT a PC! It was designed to be a Unix box from the start, and it's very fast and exceptionally reliable. It's dimensions are approximately 2.5' high (tower), 8" wide and 2" deep. I am only interested in dealing with someone local enough to come pick it up. Shipping is way too much hassle. Call if you wish, or send email. Steve Scherf (408) 736-2093 home (408) 559-5616 work steve@moonsoft.com scherf@swdc.stratus.com Newsgroups: ba.market.misc,ba.market.computers,misc.forsale,misc.forsale.computers,misc.forsale.computers.other Subject: FOR SALE: Altos 2000 Unix machine Summary: Expires: References: Sender: Followup-To: Distribution: Organization: Moondog Software, Sunnyvale, CA. Keywords: I have an Altos 2000 System V.3 Unix system for sale (I actually have two, but one's for me). Several years ago these well-known machines sold for $30,000 for the base configuration. This particular one has much more than the base configuration, depending on what you want: - 386 16 MHZ CPU. - 8 meg of ram. - Fifteen (15) serial ports (or more if you want)! - A multidrop port for up to 256 more serial ports! - Ethernet. - 5.25" floppy drive. - QIC 24 cartridge tape drive. - 170 meg ESDI hard drive (either Micropolis or CDC, or both if you want). - Unix System V.3 installation. - Networking software package (TCP/IP). - Development system software package (C compiler and libraries). I am asking only $700 (firm) for the system! If you want another Ethernet or serial card, add $50. Additional disks are $100 each (I can install a total of three ESDI drives). I would consider a trade for a SCSI DAT tape drive. This box would make a great BBS system or terminal server. It was originally designed to service 40 active users, and up to 70 moderately active users. This is NOT a PC! It was designed to be a Unix box from the start, and it's very fast and exceptionally reliable. It's dimensions are approximately 2.5' high (tower), 8" wide and 2" deep. I am only interested in dealing with someone local enough to come pick it up. Shipping is way too much hassle. Call if you wish, or send email. Steve Scherf (408) 736-2093 home (408) 559-5616 work steve@moonsoft.com scherf@swdc.stratus.com -- Steve Scherf CEO Moondog Software steve@zeppelin.moonsoft.com