!trail file version No. 876
!Pro/ENGINEER  TM  Release 16.0  (c) 1988-95 by Parametric Technology Corporation  All Rights Reserved.
!Select a menu item.
#PART
#CREATE
!Enter Part name [PRT0001]: 
flatpac2up
@ ok
#FEATURE
#CREATE
#DATUM
#COORD SYS
!COORDINATE SYSTEM has been created successfully.
#CREATE
#DATUM
#PLANE
#DEFAULT
!DATUM PLANE has been created successfully.
#CREATE
#PROTRUSION
#DONE
#BOTH SIDES
#DONE
!Select or create a SKETCHING PLANE.
0.710958 0.440874 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
!Select direction of viewing the sketching plane.
#FLIP
#OKAY
!Select or create a horizontal or vertical reference for sketching.
0.703417 0.364392 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.504134 0.461341 L
0.818679 0.423639 M
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.503057 0.459186 L
0.818679 0.422561 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
#CONSTRAINTS
!Section was not regenerated. Unable to show constraints.
#DIMENSION
0.505211 0.458109 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.819756 0.459186 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.680796 0.439797 M
@ dimtype
 6
#MODIFY
0.675410 0.436565 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!Enter a new value [237.8400]: 
9.3
0.503057 0.459186 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.503057 0.423639 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.437347 0.444105 M
0.441656 0.437642 M
#DIMENSION
#REGENERATE
!Locate section with respect to part.
#VIEW
#REGEN VIEW
#DIMENSION
0.503057 0.424716 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.507365 0.458109 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.441656 0.444105 M
@ dimtype
 6
#MODIFY
0.443810 0.443028 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
!Enter a new value [27.6000]: 
.5
#REGENERATE
!Locate section with respect to part.
0.503057 0.424716 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.343630 0.420407 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.338244 0.437642 M
@ dimtype
 2
0.503057 0.457032 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.499825 0.481808 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.523524 0.507661 M
@ dimtype
 2
#MODIFY
0.550454 0.504429 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
!Enter a new value [2.3000]: 
0
0.398567 0.434411 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
2 4
!Enter a new value [0.5200]: 
0
#REGENERATE
!Regeneration completed successfully.
!Regeneration completed successfully.
!EXTRA DIMENSIONS FOUND.
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.862844 0.457032 L
@ sel view 0
 74.487482 0.000000 0.000000 0.000000 -74.487482 0.000000
 0.000000 0.000000 -74.487482 202.302572 388.554125 0.000000 1.000000 0.000000
#DELETE
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.866076 0.459186 L
@ sel view 0
 74.487482 0.000000 0.000000 0.000000 -74.487482 0.000000
 0.000000 0.000000 -74.487482 202.302572 388.554125 0.000000 1.000000 0.000000
#REGENERATE
!Regeneration completed successfully.
!Regeneration completed successfully.
!EXTRA DIMENSIONS FOUND.
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
#SEL BY MENU
!Enter section entity ID (0 - 3) [QUIT]:

#QUERY SEL
!Hidden geometry may be selected.
0.543991 0.228664 R
!Hidden geometry may be selected.
0.543991 0.228664 R
!Hidden geometry may be selected.
0.541836 0.325612 R
!Hidden geometry may be selected.
0.490130 0.435488 R
!Hidden geometry may be selected.
0.490130 0.436565 R
!Hidden geometry may be selected.
0.490130 0.436565 R
!Hidden geometry may be selected.
0.490130 0.436565 R
!Hidden geometry may be selected.
0.490130 0.436565 R
!Hidden geometry may be selected.
0.490130 0.436565 R
!Hidden geometry may be selected.
0.528910 0.360083 R
!Hidden geometry may be selected.
0.509520 0.304068 M
0.506288 0.301914 R
#QUIT
!Confirm request to quit.
#CONFIRM
!Section creation/modification aborted.
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `cancel`
~ Activate `0_std_confirm` `OK`
#CREATE
#PROTRUSION
#DONE
#BOTH SIDES
#DONE
!Select or create a SKETCHING PLANE.
0.699109 0.463495 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
!Select direction of viewing the sketching plane.
#FLIP
#OKAY
!Select or create a horizontal or vertical reference for sketching.
0.715267 0.401017 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.540759 0.461341 L
0.817602 0.500120 M
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.543991 0.461341 L
0.818679 0.500120 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
#DIMENSION
0.546145 0.502275 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.817602 0.500120 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.666792 0.603532 M
@ dimtype
 6
0.545068 0.499043 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.545068 0.461341 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.438424 0.481808 M
@ dimtype
 6
0.499825 0.522742 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.543991 0.481808 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
0 4
0.473972 0.572293 M
@ dimtype
 5
0.675410 0.455955 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
3 4
0.672178 0.422561 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.672178 0.342848 M
@ dimtype
 5
#MODIFY
0.722807 0.347157 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
!Enter a new value [29.7400]: 
0
0.453505 0.574448 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
2 4
!Enter a new value [33.1500]: 
0
0.673256 0.598146 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!Enter a new value [207.0000]: 
9.3
0.437347 0.481808 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
!Enter a new value [29.2200]: 
.5
#REGENERATE
!Regeneration completed successfully.
#DONE
!Specify feature depth in direction indicated by the arrow.
#DONE
!Enter depth [2.63]:
4.96
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!PROTRUSION has been created successfully.
#DBMS
#SAVE
!Enter object to save [FLATPAC2UP.PRT]: 

!FLATPAC2UP has been saved.
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT 0.001077 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.003830 
*MOUSE_XROT 0.021544 MOUSE_YROT -0.022980 
*MOUSE_XROT 0.030162 MOUSE_YROT -0.020427 
*MOUSE_XROT 0.021544 MOUSE_YROT -0.012767 
*MOUSE_XROT 0.034471 MOUSE_YROT -0.012767 
*MOUSE_XROT 0.047397 MOUSE_YROT -0.033194 
*MOUSE_XROT 0.032316 MOUSE_YROT -0.033194 
*MOUSE_XROT 0.019390 MOUSE_YROT -0.005107 
*MOUSE_XROT 0.012927 MOUSE_YROT -0.006383 
*MOUSE_XROT 0.012927 MOUSE_YROT -0.003830 
*MOUSE_XROT 0.005386 MOUSE_YROT -0.002553 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.001077 
*MDSPIN -1.000000 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
*DUMMY_ACTION 1.000000 
*DUMMY_ACTION -1.000000 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
#CREATE
#SOLID
#PROTRUSION
#DONE
~ Activate `Odui_Dlg_01` `cancel`
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `0_std_confirm` `OK`
#REDEFINE
!Select feature to redefine.
0.723884 0.561521 L
@ sel view 0
 9.327999 -46.959959 -70.301850 48.939286 -54.674346 43.014667
 -68.938625 -45.167218 21.023504 444.884813 180.638732 309.272804 1.000000 0.000000
!Select element(s) to redefine or actions from the dialog box.
~ Activate `Odui_Dlg_01` `elemrefs`
!Please select an element to Show References.
~ Activate `Odui_Dlg_01` `featinfo`
~ Activate `Odui_Dlg_01` `featrefs`
!Showing reference No.1 of feature No.5 (id = 9).
#DONE/RETURN
~ Activate `Odui_Dlg_01` `redefine`
!Select elements then press "Define".
!Select element(s) to redefine or actions from the dialog box.
~ Activate `Odui_Dlg_01` `redefine`
!Select elements then press "Define".
!Select element(s) to redefine or actions from the dialog box.
~ Activate `Odui_Dlg_01` `preview`
~ Activate `Odui_Dlg_01` `elemrefs`
!Please select an element to Show References.
~ Select `Odui_Dlg_01` `odui_steps` \
1 `SECTION` 
~ Activate `Odui_Dlg_01` `elemrefs`
!Showing surface DTM3.
~ Activate `Odui_Dlg_01` `cancel`
~ Activate `0_std_confirm` `OK`
!Regenerating FLATPAC2UP feature 5 out of 5 ...
!Regeneration completed successfully.
!Redefine aborted.
#REDEFINE
!Select feature to redefine.
0.726039 0.556135 L
@ sel view 0
 9.327999 -46.959959 -70.301850 48.939286 -54.674346 43.014667
 -68.938625 -45.167218 21.023504 444.884813 180.638732 309.272804 1.000000 0.000000
!Select element(s) to redefine or actions from the dialog box.
~ Activate `Odui_Dlg_01` `featrefs`
!Showing reference No.1 of feature No.5 (id = 9).
~ Activate `Odui_Dlg_01` `cancel`
~ Activate `0_std_confirm` `Cancel`
~ Activate `Odui_Dlg_01` `elemrefs`
!Please select an element to Show References.
~ Activate `Odui_Dlg_01` `featinfo`
~ Activate `Odui_Dlg_01` `elemrefs`
!Please select an element to Show References.
~ Select `Odui_Dlg_01` `odui_steps` \
1 `SECTION` 
~ Activate `Odui_Dlg_01` `elemrefs`
!Showing surface DTM3.
#NEXT
!Showing surface DTM2.
#NEXT
!Showing surface DTM1.
#PREVIOUS
!Showing surface DTM2.
#NEXT
!Showing surface DTM1.
#INFO
#DONE/RETURN
~ Activate `Odui_Dlg_01` `elemrefs`
!Please select an element to Show References.
~ Activate `Odui_Dlg_01` `redefine`
!Select elements then press "Define".
!Select element(s) to redefine or actions from the dialog box.
0.729270 0.550749 L
0.729270 0.550749 L
0.654943 0.598146 L
0.529987 0.503352 L
0.529987 0.515201 L
0.546145 0.670319 L
0.379178 0.764037 L
0.850995 0.657393 L
#MODE
~ Activate `0_std_confirm` `OK`
!Redefine aborted.
0.969488 0.555058 L
#PART
0.888697 0.607841 L
#QUIT
0.740043 0.530282 L
0.737888 0.530282 L
0.734657 0.793121 L
0.706649 0.628308 L
0.663561 0.591683 L
#PART
#RETRIEVE
!Enter Part name  [FLATPAC2UP]: 

#MODIFY
!Select FEATURE or DIMENSION.
0.705572 0.571216 L
@ sel view 0
 9.327999 -46.959959 -70.301850 48.939286 -54.674346 43.014667
 -68.938625 -45.167218 21.023504 444.884813 180.638732 309.272804 1.000000 0.000000
0.453505 0.137101 L
@ sel view 0
 9.327999 -46.959959 -70.301850 48.939286 -54.674346 43.014667
 -68.938625 -45.167218 21.023504 444.884813 180.638732 309.272804 1.000000 0.000000
@ sel2d 0 TEXT_DIM 
1 3 0 2 -1 -1 -1 -1
!Enter value [0.50]: 
1.37
#REGENERATE
!Regenerating FLATPAC2UP feature 5 out of 5 ...
!Regeneration completed successfully.
#DBMS
#SAVE
!Enter object to save [FLATPAC2UP.PRT]: 

!FLATPAC2UP has been saved.
#FEATURE
#CREATE
#CHAMFER
#EDGE
~ Activate `Odui_Dlg_01` `cancel`
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `0_std_confirm` `OK`
#CREATE
#SLOT
#QUIT
#CREATE
#CUT
#DONE
~ Activate `Odui_Dlg_01` `cancel`
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `0_std_confirm` `OK`
#CREATE
#SLOT
#DONE
#BOTH SIDES
#DONE
!Select or create a SKETCHING PLANE.
0.524601 0.420407 L
@ sel view 0
 8.295908 -41.764097 -62.523336 43.524423 -48.624930 38.255330
 -61.310945 -40.169713 18.697369 432.815623 186.178357 257.579641 1.000000 0.000000
!Select direction of viewing the sketching plane.
#OKAY
!Select or create a horizontal or vertical reference for sketching.
0.663561 0.479653 L
@ sel view 0
 8.295908 -41.764097 -62.523336 43.524423 -48.624930 38.255330
 -61.310945 -40.169713 18.697369 432.815623 186.178357 257.579641 1.000000 0.000000
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.106644 0.477499 L
0.174508 0.406403 M
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.107721 0.477499 L
0.173431 0.405326 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
#DIMENSION
#VIEW
#PAN/ZOOM
!Indicate two locations to define a box for the zoom area.
0.071096 0.541054 L
0.350093 0.300837 L
!Indicate two locations to define a box for the zoom area.
#DIMENSION
0.108112 0.405193 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.108419 0.476957 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.073457 0.453036 M
@ dimtype
 6
#MODIFY
0.073457 0.451809 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!Enter a new value [0.8500]: 
1.37-.5
#DIMENSION
0.107805 0.405193 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.174049 0.405193 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.140007 0.389859 M
@ dimtype
 6
#MODIFY
0.141541 0.388939 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
!Enter a new value [0.7700]: 
.35
#DIMENSION
0.104739 0.433408 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
0.107805 0.433408 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
@ sel2d 0 LINE 
0 4
0.089711 0.434942 M
@ dimtype
 5
#MODIFY
0.092471 0.434328 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
0.083577 0.433715 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
@ sel2d 0 SKETCH_DIM 
2 4
!Enter a new value [0.0400]: 
0
#DIMENSION
0.171902 0.479411 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.182943 0.471437 R
!Hidden geometry may be selected.
#PICK
!Select visible geometry item.
#MODIFY
#DIMENSION
0.148594 0.480024 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
0.147981 0.477264 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
@ sel2d 0 LINE 
3 4
0.148288 0.503946 M
@ dimtype
 5
#MODIFY
0.162395 0.504252 L
@ sel view 0
 -85.049503 0.000000 0.000000 0.000000 -85.049503 0.000000
 0.000000 0.000000 85.049503 895.480187 363.616091 0.000000 3.512440 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
!Enter a new value [0.0300]: 
0
#REGENERATE
!Regeneration completed successfully.
#DONE
!Specify feature depth in direction indicated by the arrow.
#BLIND
#DONE
!Enter depth [2.66]:
4.96
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!SLOT has been created successfully.
#VIEW
#PAN/ZOOM
!Indicate two locations to define a box for the zoom area.
#ZOOM OUT
!Indicate two locations to define a box for the zoom area.
#ZOOM OUT
!Indicate two locations to define a box for the zoom area.
#PAN
!Select new point for SCREEN CENTER.
0.537933 0.443808 L
!Select new point for SCREEN CENTER.
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT 0.008618 MOUSE_YROT -0.003830 
*MOUSE_XROT 0.051706 MOUSE_YROT -0.033194 
*MOUSE_XROT 0.047397 MOUSE_YROT -0.022980 
*MOUSE_XROT 0.025853 MOUSE_YROT -0.003830 
*MOUSE_XROT 0.043088 MOUSE_YROT -0.015320 
*MOUSE_XROT 0.021544 MOUSE_YROT -0.011490 
*MOUSE_XROT 0.017235 MOUSE_YROT -0.007660 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.001077 
*MOUSE_XROT -0.001077 
*MDSPIN -1.000000 
*MOUSE_XROT -0.005386 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.105566 MOUSE_YROT 0.117456 
*MOUSE_XROT -0.004309 MOUSE_YROT 0.002553 
*MOUSE_YROT -0.002553 
*MOUSE_XROT 0.003232 MOUSE_YROT -0.012767 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.012767 
*MOUSE_XROT 0.003232 MOUSE_YROT -0.006383 
*MOUSE_XROT 0.005386 MOUSE_YROT -0.008937 
*MOUSE_XROT 0.002154 MOUSE_YROT -0.002553 
*MOUSE_YROT -0.001277 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.007660 
*MOUSE_XROT -0.004309 MOUSE_YROT 0.015320 
*MOUSE_YROT 0.001277 
*MOUSE_XROT -0.003232 MOUSE_YROT -0.043408 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.021704 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.001277 
*MOUSE_YROT -0.001277 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.368445 0.261806 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.330416 0.260580 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Distance from reference [0.25]: 
.18
!Select the second reference.
0.213876 0.321916 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Distance from reference [2.34]: 
2.281
#DONE
!Select option for the TO end of the feature.
#THRU ALL
#DONE
!Enter DIAMETER [0.10]: 
.156
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!HOLE has been created successfully.
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.248224 0.299835 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.234730 0.296155 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Distance from reference [0.13]: 
.18
!Select the second reference.
0.212649 0.287568 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Distance from reference [0.42]: 
0
#DONE
!Select option for the TO end of the feature.
#THRU ALL
#DONE
!Enter DIAMETER [0.10]: 
.156
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!HOLE has been created successfully.
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.103470 0.352585 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.104696 0.341544 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Cannot pick plane parallel to placement plane, select again.
0.103470 0.343998 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Distance from reference [0.14]: 
.18
!Select the second reference.
0.211422 0.355038 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Distance from reference [2.04]: 
-2.281
#DONE
!Select option for the TO end of the feature.
#THRU ALL
#DONE
!Enter DIAMETER [0.10]: 
.156
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!WARNING: HOLE is entirely outside the model; model unchanged.
!HOLE has been created successfully.
#DBMS
#SAVE
!Enter object to save [FLATPAC2UP.PRT]: 

!FLATPAC2UP has been saved.
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.162353 0.330503 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.150086 0.328050 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Distance from reference [0.12]: 
.18
!Select the second reference.
0.070348 0.345224 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Select a plane, datum or edge for dimensioning to axis.
0.067894 0.345224 L
@ sel view 0
 -61.266161 0.975459 58.982403 -21.752879 -79.418634 -21.281699
 54.833271 -30.416229 57.459406 785.555840 468.624125 -275.809826 0.878110 0.000000
!Invalid edge or axis for placement, try again.
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT 0.002154 MOUSE_YROT -0.002553 
*MOUSE_XROT 0.008618 MOUSE_YROT -0.007660 
*MOUSE_XROT 0.019390 MOUSE_YROT -0.028087 
*MOUSE_XROT 0.036625 MOUSE_YROT -0.020427 
*MOUSE_XROT 0.038780 MOUSE_YROT -0.012767 
*MOUSE_XROT 0.051706 MOUSE_YROT -0.002553 
*MOUSE_XROT 0.047397 MOUSE_YROT -0.020427 
*MOUSE_XROT 0.034471 MOUSE_YROT -0.010214 
*MOUSE_XROT 0.012927 MOUSE_YROT -0.005107 
*MOUSE_XROT 0.017235 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.011849 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.002154 MOUSE_YROT -0.002553 
*MOUSE_XROT -0.008618 MOUSE_YROT -0.010214 
*MOUSE_XROT -0.008618 MOUSE_YROT -0.003830 
*MOUSE_XROT -0.017235 MOUSE_YROT -0.006383 
*MOUSE_XROT -0.012927 MOUSE_YROT -0.002553 
*MDSPIN -1.000000 
*MOUSE_XROT 0.002154 
*MOUSE_XROT 0.022621 
*MOUSE_XROT -0.036625 MOUSE_YROT -0.006383 
*MOUSE_XROT -0.039857 MOUSE_YROT -0.005107 
*MOUSE_XROT -0.001077 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
*MDZOOM 1.000000 
0.413834 0.101104 L
0.369671 0.113371 R
0.384392 0.119505 L
*MDZOOM -1.000000 
#PAN/ZOOM
!Indicate two locations to define a box for the zoom area.
#ZOOM OUT
!Indicate two locations to define a box for the zoom area.
#ZOOM OUT
!Indicate two locations to define a box for the zoom area.
#ZOOM OUT
!Indicate two locations to define a box for the zoom area.
#PICK
!Select visible geometry item.
0.415817 0.085348 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 4.245685 0.000000
!Distance from reference [0.12]: 
.199
!Selected references are parallel, select both the references again.
~ Activate `Odui_Dlg_01` `cancel`
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `0_std_confirm` `OK`
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.441443 0.093467 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 4.245685 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.447025 0.085602 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 4.245685 0.000000
!Distance from reference [0.10]: 
.18
!Select the second reference.
0.417593 0.091945 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 4.245685 0.000000
!Distance from reference [0.35]: 
.199
#DONE
!Select option for the TO end of the feature.
#THRU ALL
#DONE
!Enter DIAMETER [0.10]: 
.156
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!HOLE has been created successfully.
#VIEW
#PAN/ZOOM
!Indicate two locations to define a box for the zoom area.
#ZOOM OUT
!Indicate two locations to define a box for the zoom area.
#ZOOM OUT
!Indicate two locations to define a box for the zoom area.
#PAN
!Select new point for SCREEN CENTER.
0.517688 0.406279 L
!Select new point for SCREEN CENTER.
#CREATE
#DBMS
#SAVE
!Enter object to save [FLATPAC2UP.PRT]: 

!FLATPAC2UP has been saved.
#HOLE
#DONE
#DONE
!Select the placement plane.
0.466780 0.255710 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 1.061421 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.542895 0.080136 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 1.061421 0.000000
!Distance from reference [1.83]: 
6.18
!Select the second reference.
0.423140 0.236427 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 1.061421 0.000000
!Distance from reference [0.73]: 
.199
#DONE
!Select option for the TO end of the feature.
#THRU ALL
#DONE
!Enter DIAMETER [0.10]: 
.156
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!HOLE has been created successfully.
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.713394 0.294275 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 1.061421 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.661635 0.071003 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 1.061421 0.000000
!Distance from reference [2.56]: 
6.18
!Select the second reference.
0.633219 0.126821 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 1.061421 0.000000
!Distance from reference [1.96]: 
0
#DONE
!Select option for the TO end of the feature.
#THRU UNTIL
#THRU ALL
#DONE
!Enter DIAMETER [0.10]: 
.156
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!HOLE has been created successfully.
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.681933 0.408956 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 1.061421 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.684978 0.073032 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 1.061421 0.000000
!Distance from reference [4.15]: 
6.18
!Select the second reference.
0.606832 0.214100 L
@ sel view 0
 22.020508 -41.616016 70.828119 -72.191747 -44.796683 -3.876434
 39.202892 -59.116684 -46.923009 369.097669 726.880897 -222.788378 1.061421 0.000000
!Distance from reference [2.01]: 
2.281
#DONE
!Select option for the TO end of the feature.
#THRU ALL
#DONE
!Enter DIAMETER [0.10]: 
.156
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!HOLE has been created successfully.
#DBMS
#SAVE
!Enter object to save [FLATPAC2UP.PRT]: 

!FLATPAC2UP has been saved.
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.021544 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.049552 MOUSE_YROT 0.005107 
*MOUSE_XROT 0.058169 MOUSE_YROT 0.010214 
*MOUSE_XROT 0.021544 MOUSE_YROT 0.014044 
*MOUSE_XROT 0.017235 MOUSE_YROT 0.015320 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.003830 
*MOUSE_XROT -0.004309 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.012927 MOUSE_YROT -0.005107 
*MOUSE_XROT -0.017235 MOUSE_YROT -0.005107 
*MOUSE_XROT -0.017235 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.034471 MOUSE_YROT 0.006383 
*MOUSE_XROT -0.034471 MOUSE_YROT 0.007660 
*MOUSE_XROT -0.019390 MOUSE_YROT 0.003830 
*MOUSE_XROT -0.032316 MOUSE_YROT 0.008937 
*MOUSE_XROT -0.019390 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.015081 MOUSE_YROT 0.007660 
*MOUSE_XROT -0.019390 MOUSE_YROT 0.006383 
*MOUSE_XROT -0.019390 MOUSE_YROT 0.014044 
*MOUSE_XROT -0.004309 MOUSE_YROT 0.005107 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.003830 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.005107 
*MOUSE_XROT -0.003232 MOUSE_YROT 0.005107 
*MOUSE_XROT -0.003232 MOUSE_YROT 0.028087 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.008937 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.001277 
*MOUSE_YROT 0.001277 
*MOUSE_YROT -0.002553 
*MOUSE_XROT -0.001077 MOUSE_YROT -0.003830 
*MOUSE_XROT -0.001077 MOUSE_YROT -0.003830 
*MOUSE_YROT -0.001277 
*MDSPIN -1.000000 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
#REPAINT
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT -0.001077 
*MOUSE_XROT -0.015081 
*MOUSE_XROT -0.036625 
*MOUSE_XROT -0.075405 MOUSE_YROT 0.005107 
*MOUSE_XROT -0.034471 MOUSE_YROT 0.003830 
*MOUSE_XROT -0.028007 MOUSE_YROT 0.003830 
*MOUSE_XROT -0.017235 MOUSE_YROT 0.006383 
*MOUSE_XROT -0.010772 MOUSE_YROT 0.007660 
*MOUSE_XROT -0.017235 MOUSE_YROT 0.017874 
*MOUSE_XROT -0.007540 MOUSE_YROT 0.020427 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.015320 
*MOUSE_YROT 0.003830 
*MOUSE_XROT -0.004309 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.008618 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.004309 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.004309 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.008618 
*MOUSE_XROT -0.008618 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.021544 MOUSE_YROT 0.010214 
*MOUSE_XROT -0.012927 MOUSE_YROT 0.010214 
*MOUSE_XROT -0.004309 MOUSE_YROT 0.005107 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.002154 
*MOUSE_XROT 0.012927 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.030162 
*MOUSE_XROT 0.051706 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.012927 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.012927 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.006463 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.006463 
*MOUSE_XROT -0.002154 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.001077 
*MOUSE_XROT -0.003232 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.004309 MOUSE_YROT -0.002553 
*MOUSE_XROT -0.001077 
*MOUSE_XROT -0.003232 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.003232 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.002154 
*MOUSE_XROT -0.002154 
*MOUSE_XROT -0.003232 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.002154 
*MOUSE_XROT -0.002154 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.002154 
*MOUSE_XROT -0.002154 MOUSE_YROT -0.001277 
*MDSPIN -1.000000 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
#REPAINT
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT 0.001077 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.005386 MOUSE_YROT -0.003830 
*MOUSE_XROT 0.003232 MOUSE_YROT -0.003830 
*MOUSE_XROT -0.002154 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.014004 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.006463 MOUSE_YROT -0.002553 
*MOUSE_XROT -0.001077 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.003232 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.006463 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.008937 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.007660 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.005107 
*MOUSE_YROT 0.002553 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.006383 
*MOUSE_YROT 0.007660 
*MOUSE_YROT -0.001277 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.002553 
*MDSPIN -1.000000 
*MOUSE_XROT 0.001077 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
#REPAINT
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT 0.001077 
*MOUSE_XROT 0.002154 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.006463 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.006463 MOUSE_YROT -0.007660 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.003830 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.020427 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.007660 
*MOUSE_XROT 0.003232 MOUSE_YROT -0.007660 
*MOUSE_XROT -0.003232 MOUSE_YROT -0.017874 
*MOUSE_XROT -0.005386 MOUSE_YROT -0.015320 
*MOUSE_XROT -0.003232 MOUSE_YROT -0.008937 
*MOUSE_XROT -0.001077 MOUSE_YROT -0.017874 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.010214 
*MOUSE_YROT -0.008937 
*MOUSE_XROT -0.002154 MOUSE_YROT -0.010214 
*MOUSE_XROT 0.002154 MOUSE_YROT -0.003830 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.006463 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.005386 MOUSE_YROT 0.011490 
*MOUSE_XROT 0.005386 MOUSE_YROT 0.005107 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.005107 
*MOUSE_YROT 0.001277 
*MOUSE_XROT 0.006463 MOUSE_YROT 0.003830 
*MOUSE_XROT -0.003232 MOUSE_YROT 0.005107 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.003830 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.004309 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.003232 MOUSE_YROT -0.002553 
*MOUSE_YROT -0.012767 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.005107 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.004309 
*MOUSE_XROT 0.003232 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.001077 
*MOUSE_XROT 0.002154 
*MOUSE_XROT 0.001077 
*MDSPIN -1.000000 
*MOUSE_YROT -0.001277 
*MOUSE_XROT 0.025853 MOUSE_YROT 0.003830 
*MOUSE_XROT -0.003232 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.008937 
*MOUSE_XROT -0.007540 MOUSE_YROT 0.005107 
*MOUSE_XROT -0.007540 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.001077 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
#REPAINT
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDZOOM 1.000000 
0.303385 0.258754 L
0.308459 0.257739 M
*MDSPIN -1.000000 
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT 0.002154 
*MOUSE_XROT 0.004309 
*MOUSE_XROT 0.030162 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.012927 MOUSE_YROT -0.003830 
*MOUSE_XROT 0.005386 
*MOUSE_XROT 0.007540 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.006463 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.002154 
*MOUSE_XROT 0.002154 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.004309 
*MOUSE_XROT 0.004309 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.003232 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.002553 
*MOUSE_XROT 0.006463 MOUSE_YROT -0.002553 
*MOUSE_XROT 0.008618 MOUSE_YROT -0.005107 
*MOUSE_XROT 0.005386 MOUSE_YROT -0.003830 
*MOUSE_XROT 0.012927 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.015081 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.002553 
*MOUSE_XROT 0.001077 
*MOUSE_XROT -0.001077 
*MOUSE_XROT -0.004309 MOUSE_YROT -0.002553 
*MOUSE_XROT -0.008618 MOUSE_YROT -0.003830 
*MOUSE_XROT -0.008618 MOUSE_YROT -0.003830 
*MOUSE_XROT -0.004309 
*MOUSE_XROT -0.006463 MOUSE_YROT -0.002553 
*MOUSE_XROT -0.002154 
*MOUSE_XROT -0.002154 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.004309 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.002154 
*MOUSE_YROT 0.001277 
*MOUSE_YROT 0.001277 
*MOUSE_YROT 0.008937 
*MOUSE_XROT 0.008618 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.012927 MOUSE_YROT 0.010214 
*MOUSE_XROT 0.004309 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.004309 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.004309 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.001077 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.001277 
*MOUSE_YROT 0.005107 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.005107 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.008937 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.003830 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.006383 
*MOUSE_XROT -0.004309 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.008618 
*MOUSE_XROT -0.008618 
*MOUSE_XROT -0.010772 MOUSE_YROT 0.008937 
*MOUSE_XROT -0.007540 MOUSE_YROT 0.006383 
*MOUSE_XROT -0.015081 MOUSE_YROT 0.005107 
*MOUSE_XROT -0.010772 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.010772 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.010772 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.004309 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.001077 
*MOUSE_XROT -0.007540 
*MOUSE_XROT -0.006463 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.002154 
*MOUSE_XROT 0.002154 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.012767 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.020427 
*MOUSE_XROT 0.008618 MOUSE_YROT -0.007660 
*MOUSE_XROT 0.006463 MOUSE_YROT -0.007660 
*MOUSE_XROT 0.006463 MOUSE_YROT -0.005107 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.010214 
*MOUSE_XROT 0.012927 MOUSE_YROT -0.014044 
*MOUSE_XROT 0.004309 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.006463 MOUSE_YROT -0.010214 
*MOUSE_YROT -0.001277 
*MOUSE_XROT 0.001077 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.001077 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.005386 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.016597 
*MOUSE_XROT -0.001077 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.006383 
*MOUSE_YROT 0.002553 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.001277 
*MOUSE_YROT 0.015320 
*MOUSE_YROT 0.005107 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.003830 
*MDSPIN -1.000000 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
#REPAINT
#EXIT
!Do you really want to exit? [N]: 
YES
@ confirm 1