!trail file version No. 876
!Pro/ENGINEER  TM  Release 16.0  (c) 1988-95 by Parametric Technology Corporation  All Rights Reserved.
!Select a menu item.
#PART
#CREATE
!Enter Part name [PRT0001]: 
sba-amp
@ ok
#FEATURE
#CREATE
#DATUM
#COORD SYS
!COORDINATE SYSTEM has been created successfully.
#CREATE
#DATUM
#PLANE
#DEFAULT
!DATUM PLANE has been created successfully.
#CREATE
#SOLID
#PROTRUSION
#DONE
#ONE SIDE
#DONE
!Select or create a SKETCHING PLANE.
0.668947 0.497966 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
0.680796 0.505506 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
!Arrow shows direction of feature creation. Pick FLIP or OKAY.
#OKAY
!Select or create a horizontal or vertical reference for sketching.
#TOP
#BOTTOM
0.562303 0.434411 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
0.607546 0.501198 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.381332 0.618613 L
0.659252 0.264212 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
#DIMENSION
0.659252 0.616459 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.659252 0.260980 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.699109 0.461341 M
@ dimtype
 6
0.382409 0.617536 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.660329 0.617536 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.539682 0.654161 M
@ dimtype
 6
#MODIFY
0.698031 0.463495 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!Enter a new value [267.0700]: 
5.118
0.543991 0.654161 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
!Enter a new value [209.4300]: 
3.149
0.382409 0.616459 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.340398 0.421484 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.342552 0.419330 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
#DIMENSION
#VIEW
#REGEN VIEW
0.422266 0.617536 L
#DIMENSION
0.367328 0.419330 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.405031 0.617536 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
3 4
0.330703 0.516278 M
@ dimtype
 5
0.381332 0.265289 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.499825 0.232973 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.442733 0.231895 M
@ dimtype
 2
#MODIFY
0.441656 0.228664 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
!Enter a new value [89.4200]: 
1.5748
0.330703 0.511970 L
@ sel view 0
 0.000000 1.327015 0.000000 -1.327015 0.000000 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
2 4
!Enter a new value [148.2600]: 
2.559
#DONE
!Unresolved section; REGENERATE before continuing.
#REGENERATE
!Regeneration completed successfully.
#DONE
!Specify feature depth in direction indicated by the arrow.
#BLIND
#DONE
!Enter depth [1.83]:
.2362
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `elemrefs`
!Please select an element to Show References.
~ Activate `Odui_Dlg_01` `featinfo`
~ Activate `Odui_Dlg_01` `okay`
!PROTRUSION has been created successfully.
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.708803 0.350388 L
@ sel view 0
 0.000000 130.355735 0.000000 -130.355735 0.000000 0.000000
 0.000000 0.000000 130.355735 500.039107 421.875000 -15.395012 1.000000 0.000000
!Select the feature's placement location on the datum plane.
0.677564 0.421484 L
!Arrow shows direction of feature creation. Pick FLIP or OKAY.
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.017235 MOUSE_YROT 0.010214 
*MOUSE_XROT 0.008618 MOUSE_YROT 0.012767 
*MOUSE_XROT 0.012927 MOUSE_YROT 0.015320 
*MOUSE_YROT 0.005107 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.004309 MOUSE_YROT 0.005107 
*MOUSE_XROT 0.004309 MOUSE_YROT 0.005107 
*MOUSE_XROT 0.006463 MOUSE_YROT 0.008937 
*MOUSE_XROT 0.006463 MOUSE_YROT 0.006383 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.010772 MOUSE_YROT 0.008937 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.003830 
*MDSPIN -1.000000 
*DUMMY_ACTION 1.000000 
*DUMMY_ACTION -1.000000 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
#FLIP
#OKAY
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.690491 0.097244 L
@ sel view 0
 15.465003 113.201423 62.760571 -110.661277 -21.221924 65.546391
 67.138165 -61.054775 93.580976 492.621937 414.127605 -11.070230 1.000000 0.000000
!Cannot pick placement plane for referencing, select again.
0.696954 0.111248 L
@ sel view 0
 15.465003 113.201423 62.760571 -110.661277 -21.221924 65.546391
 67.138165 -61.054775 93.580976 492.621937 414.127605 -11.070230 1.000000 0.000000
!Distance from reference [2.56]: 

!Select the second reference.
0.717421 0.162954 L
@ sel view 0
 15.465003 113.201423 62.760571 -110.661277 -21.221924 65.546391
 67.138165 -61.054775 93.580976 492.621937 414.127605 -11.070230 1.000000 0.000000
!Distance from reference [0.21]: 

#DONE
!Select option for the TO end of the feature.
#THRU ALL
#DONE
!Enter DIAMETER [0.06]: 
.118
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!HOLE has been created successfully.
0.654943 0.383782 L
0.654943 0.388091 L
#DELETE
!Select one or more features to DELETE.
0.661406 0.388091 L
@ sel view 0
 15.465003 113.201423 62.760571 -110.661277 -21.221924 65.546391
 67.138165 -61.054775 93.580976 492.621937 414.127605 -11.070230 1.000000 0.000000
!Select option for the child in blue.
#DELETE
!Select one or more features to DELETE.
#DONE
#DONE
#FEATURE
#CREATE
#SOLID
#PROTRUSION
#DONE
#DONE
!Select or create a SKETCHING PLANE.
0.539682 0.457032 L
@ sel view 0
 0.932580 0.008238 0.149590 0.043318 0.887999 -0.318954
 -0.143417 0.321777 0.876380 500.000000 421.875000 0.000000 1.000000 0.000000
!Arrow shows direction of feature creation. Pick FLIP or OKAY.
#OKAY
!Select or create a horizontal or vertical reference for sketching.
0.759432 0.369778 L
@ sel view 0
 0.932580 0.008238 0.149590 0.043318 0.887999 -0.318954
 -0.143417 0.321777 0.876380 500.000000 421.875000 0.000000 1.000000 0.000000
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.341475 0.658470 L
0.658175 0.224355 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
#DIMENSION
0.343630 0.657393 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.658175 0.658470 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.509520 0.677860 M
@ dimtype
 6
0.660329 0.656316 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.657097 0.223278 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.699109 0.482885 M
@ dimtype
 6
0.343630 0.656316 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.313468 0.421484 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.297310 0.538900 M
@ dimtype
 2
0.503057 0.213583 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.340398 0.223278 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.423343 0.192039 M
@ dimtype
 2
0.520292 0.676783 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!This is not a baseline. Select again.
#MODIFY
0.508443 0.678937 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!Enter a new value [238.6600]: 
5.118
0.703417 0.480731 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
!Enter a new value [327.1400]: 
5.118
0.529987 0.674628 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!Enter a new value [5.1180]: 
3.1496
0.424420 0.190961 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
!Enter a new value [119.4600]: 
1.575
0.300541 0.537823 L
@ sel view 0
 0.000000 0.000000 1.327015 0.000000 -1.327015 0.000000
 1.327015 0.000000 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
2 4
!Enter a new value [178.2900]: 
2.559
#REGENERATE
!Regeneration completed successfully.
#DONE
!Specify feature depth in direction indicated by the arrow.
#DONE
!Enter depth [1.83]:
.236
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!PROTRUSION has been created successfully.
#DBMS
#SAVE
!Enter object to save [SBA-AMP.PRT]: 

!SBA-AMP has been saved.
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDZOOM 1.000000 
0.295155 0.088627 L
0.319931 0.112325 M
*MDSPIN -1.000000 
*MDSPIN 1.000000 
*MOUSE_XROT 0.004309 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.021544 MOUSE_YROT 0.012767 
*MOUSE_XROT 0.023699 MOUSE_YROT 0.022980 
*MOUSE_XROT 0.015081 MOUSE_YROT 0.015320 
*MOUSE_XROT 0.010772 MOUSE_YROT 0.007660 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.001277 
*MDSPIN -1.000000 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.597851 0.111248 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.706649 0.189884 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Select a plane, datum or edge for dimensioning to axis.
#DONE SEL
!Not all elements are defined. Select element(s) or action(s) from dialog box.
0.870385 0.586297 M
~ Activate `Odui_Dlg_01` `redefine`
!Select the placement plane.
0.601083 0.482885 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.696954 0.297605 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Distance from reference [0.72]: 
~ Activate `Odui_Dlg_01` `cancel`

!Select the second reference.
#QUIT SEL
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `0_std_confirm` `OK`
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.649557 0.208197 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.623704 0.104785 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Distance from reference [0.87]: 
.2165
!Select the second reference.
0.709881 0.136024 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Distance from reference [0.47]: 
.4331
#DONE
!Select option for the TO end of the feature.
#THRU ALL
#DONE
!Enter DIAMETER [0.06]: 
.118
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!HOLE has been created successfully.
#DBMS
#SAVE
!Enter object to save [SBA-AMP.PRT]: 

!SBA-AMP has been saved.
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.600005 0.318072 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.510597 0.122020 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Distance from reference [0.74]: 
~ Activate `Odui_Dlg_01` `cancel`

!Select the second reference.
#QUIT SEL
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `0_std_confirm` `OK`
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.595697 0.350388 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.370560 0.137101 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Distance from reference [2.01]: 
.2165
!Select the second reference.
0.708803 0.160800 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Distance from reference [0.85]: 
2.7165
#DONE
!Select option for the TO end of the feature.
#THRU ALL
#DONE
!Enter DIAMETER [0.06]: 
.118
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!HOLE has been created successfully.
#DBMS
#SAVE
!Enter object to save [SBA-AMP.PRT]: 

!SBA-AMP has been saved.
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.557994 0.570139 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.673256 0.100476 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Distance from reference [3.82]: 
4.902
!Select the second reference.
0.703417 0.227586 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Distance from reference [1.03]: 
.4331
#DONE
!Select option for the TO end of the feature.
#THRU ALL
#DONE
!Enter DIAMETER [0.06]: 
.118
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!HOLE has been created successfully.
#DBMS
#SAVE
!Enter object to save [SBA-AMP.PRT]: 

!SBA-AMP has been saved.
#CREATE
#HOLE
#DONE
#DONE
!Select the placement plane.
0.557994 0.595992 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Select TWO edges, axes, planar surfaces or datums for DIMENSIONING.
0.596774 0.109093 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Distance from reference [4.04]: 
4.90
!Select the second reference.
0.690491 0.423639 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Distance from reference [1.02]: 
2.7165
#DONE
!Select option for the TO end of the feature.
#THRU ALL
#DONE
!Enter DIAMETER [0.06]: 
.118
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!HOLE has been created successfully.
#DBMS
#SAVE
!Enter object to save [SBA-AMP.PRT]: 

!SBA-AMP has been saved.
#CREATE
#SOLID
#PROTRUSION
#DONE
#DONE
!Select or create a SKETCHING PLANE.
0.679719 0.081086 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
!Arrow shows direction of feature creation. Pick FLIP or OKAY.
#OKAY
!Select or create a horizontal or vertical reference for sketching.
0.679719 0.542131 L
@ sel view 0
 59.930683 9.024362 115.410016 48.909918 -119.763717 -16.033388
 104.922499 50.673569 -58.447038 492.951261 416.100423 -12.392544 1.000000 0.000000
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.593542 0.235127 L
0.825142 0.180189 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
#DIMENSION
0.592465 0.179112 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.826219 0.181266 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.720653 0.137101 M
@ dimtype
 6
0.826219 0.183421 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.896238 0.178035 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
0.869308 0.134947 M
@ dimtype
 6
#QUIT SEL
~ Activate `Odui_Dlg_01` `cancel`
!Confirm request to quit.
!Section creation/modification aborted.
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `0_std_confirm` `OK`
#VIEW
0.532141 0.570139 M
#SPIN
!Left button to select, right button to reset, middle button to abort.
#PREVIOUS
#CREATE
#PROTRUSION
#DONE
#DONE
!Select or create a SKETCHING PLANE.
#VIEW
0.703417 0.088627 L
0.703417 0.088627 M
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.017235 MOUSE_YROT 0.010214 
*MOUSE_XROT 0.008618 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.005386 MOUSE_YROT 0.005107 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.004309 MOUSE_YROT 0.002553 
*MOUSE_YROT 0.001277 
*MDSPIN -1.000000 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
*MDPAN 1.000000 
*MDPAN -1.000000 
*HORIZ 0.021544 VERT 0.002553 
*HORIZ 0.050629 VERT 0.006383 
*HORIZ 0.064633 VERT 0.033194 
*HORIZ -0.002154 VERT -0.002553 
*HORIZ -0.118493 VERT -0.049791 
*HORIZ -0.038780 VERT 0.005107 
*HORIZ -0.032316 VERT -0.003830 
*DUMMY_ACTION 1.000000 
*HORIZ 0.001077 
*DUMMY_ACTION -1.000000 
*HORIZ 0.002154 
*HORIZ 0.047397 VERT -0.001277 
*HORIZ 0.088331 VERT 0.006383 
*HORIZ 0.135728 VERT 0.017874 
*HORIZ -0.046320 VERT -0.016597 
*HORIZ -0.020467 VERT -0.005107 
*HORIZ -0.001077 
*DUMMY_ACTION 1.000000 
*HORIZ -0.001077 
*DUMMY_ACTION -1.000000 
*HORIZ -0.050629 VERT 0.005107 
*HORIZ -0.014004 VERT 0.002553 
*HORIZ -0.010772 
*HORIZ -0.005386 VERT 0.001277 
*DUMMY_ACTION 1.000000 
*DUMMY_ACTION -1.000000 
*HORIZ 0.001077 
*HORIZ 0.023699 VERT -0.001277 
*HORIZ 0.006463 VERT -0.002553 
*HORIZ -0.017235 VERT -0.006383 
*HORIZ -0.003232 
*HORIZ -0.009695 
*DUMMY_ACTION 1.000000 
*DUMMY_ACTION -1.000000 
*HORIZ -0.003232 
*HORIZ -0.066787 VERT 0.025534 
*HORIZ -0.006463 VERT 0.001277 
*MDPAN 1.000000 
*MDPAN -1.000000 
#PICK
!Select visible geometry item.
0.617241 0.096167 L
@ sel view 0
 42.111071 4.266062 123.292563 32.284654 -126.118602 -6.663107
 119.067025 32.687866 -41.798858 495.055552 418.064078 -14.058269 1.000000 0.000000
!Arrow shows direction of feature creation. Pick FLIP or OKAY.
#SETUP NEW
!Select or create a SKETCHING PLANE.
0.316699 0.328844 L
@ sel view 0
 42.111071 4.266062 123.292563 32.284654 -126.118602 -6.663107
 119.067025 32.687866 -41.798858 495.055552 418.064078 -14.058269 1.000000 0.000000
!Arrow shows direction of feature creation. Pick FLIP or OKAY.
#OKAY
!Select or create a horizontal or vertical reference for sketching.
#BOTTOM
0.559071 0.310532 L
@ sel view 0
 42.111071 4.266062 123.292563 32.284654 -126.118602 -6.663107
 119.067025 32.687866 -41.798858 495.055552 418.064078 -14.058269 1.000000 0.000000
!Reference plane must be perpendicular to sketching plane.
!Select or create a horizontal or vertical reference for sketching.
0.704495 0.258826 L
@ sel view 0
 42.111071 4.266062 123.292563 32.284654 -126.118602 -6.663107
 119.067025 32.687866 -41.798858 495.055552 418.064078 -14.058269 1.000000 0.000000
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.176662 0.180189 L
0.827296 0.663856 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
#DIMENSION
0.105566 0.207120 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
0.177739 0.206042 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 LINE 
0 4
0.136806 0.118788 M
@ dimtype
 5
0.177739 0.180189 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.828374 0.180189 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.500902 0.114480 M
@ dimtype
 6
0.824065 0.179112 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.861767 0.176958 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
0.859613 0.153259 M
@ dimtype
 2
0.178817 0.180189 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.177739 0.661702 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.058169 0.422561 M
@ dimtype
 6
#MODIFY
0.912396 0.150027 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
2 4
!Enter a new value [0.0100]: 
0
0.140037 0.117711 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!Enter a new value [0.4700]: 
.3642
0.064633 0.419330 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
!Enter a new value [3.1300]: 
3.1496
0.500902 0.108016 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
0.504134 0.110171 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
!Enter a new value [4.2100]: 

#DELETE
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.507365 0.109093 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
#DIMENSION
0.827296 0.181266 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.105566 0.202811 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
0.501979 0.067082 M
@ dimtype
 2
#MODIFY
0.506288 0.060619 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
0.507365 0.067082 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
!Enter a new value [4.6800]: 
4.754
#REGENERATE
!Regeneration completed successfully.
!Regeneration completed successfully.
!EXTRA DIMENSIONS FOUND.
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.939326 0.175880 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
#UNREGENERATE
!Section restored to unregenerated state.
#DELETE
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.922091 0.152182 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
#REGENERATE
!Underdimensioned section.  Please align to part or add dimensions.
0.182048 0.180189 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.199284 0.181266 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 LINE 
3 4
0.212210 0.422561 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
0.241295 0.305146 M
!This dimension type is not allowed.
!Cannot create specified dimension.
0.860690 0.421484 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
0.798212 0.179112 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 LINE 
3 4
0.737888 0.319149 M
@ dimtype
 5
#MODIFY
0.749737 0.312686 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
0.743274 0.311609 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
0.742197 0.314840 L
@ sel view 0
 0.000000 -154.495595 0.000000 0.000000 0.000000 -154.495595
 154.495595 0.000000 0.000000 500.000000 421.844101 -18.230480 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
!Enter a new value [1.5600]: 
1.5748
#REGENERATE
!Regeneration completed successfully.
!Should the highlighted entities be aligned? Select option.
#DONE
#DON'T ALIGN
!Should the highlighted entities be aligned? Select option.
#DON'T ALIGN
!Should the highlighted entities be aligned? Select option.
#QUIT
!Regeneration completed successfully.
#DONE
!Specify feature depth in direction indicated by the arrow.
#DONE
!Enter depth [1.50]:
1.445
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!PROTRUSION has been created successfully.
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDZOOM 1.000000 
0.896238 0.179112 L
0.881157 0.179112 M
*MDSPIN -1.000000 
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT 0.001077 
*MOUSE_XROT 0.049552 MOUSE_YROT -0.014044 
*MOUSE_XROT 0.025853 MOUSE_YROT -0.003830 
*MOUSE_XROT 0.006463 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.008618 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.012927 MOUSE_YROT -0.002553 
*MOUSE_XROT 0.008618 MOUSE_YROT -0.001277 
*MOUSE_XROT 0.004309 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.017235 MOUSE_YROT 0.019150 
*MOUSE_XROT 0.008618 MOUSE_YROT 0.015320 
*MOUSE_XROT 0.004309 MOUSE_YROT 0.007660 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.010214 
*MOUSE_YROT 0.001277 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.006383 
*MDSPIN -1.000000 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
*MDZOOM 1.000000 
0.256376 0.697250 L
0.388872 0.615382 R
0.383486 0.619691 L
*MDZOOM -1.000000 
#PAN/ZOOM
!Indicate two locations to define a box for the zoom area.
#ZOOM OUT
!Indicate two locations to define a box for the zoom area.
#ZOOM OUT
!Indicate two locations to define a box for the zoom area.
#ZOOM OUT
!Indicate two locations to define a box for the zoom area.
#PAN
!Select new point for SCREEN CENTER.
0.479681 0.421467 L
!Select new point for SCREEN CENTER.
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*MDSPIN 1.000000 
*MOUSE_XROT -0.003232 MOUSE_YROT -0.005107 
*MOUSE_XROT -0.032316 MOUSE_YROT -0.010214 
*MOUSE_XROT -0.032316 MOUSE_YROT -0.005107 
*MOUSE_XROT -0.034471 MOUSE_YROT -0.006383 
*MOUSE_XROT -0.030162 MOUSE_YROT -0.005107 
*MOUSE_XROT -0.018313 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.028007 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.004309 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.012927 MOUSE_YROT 0.010214 
*MOUSE_XROT 0.058169 MOUSE_YROT 0.022980 
*MOUSE_XROT 0.058169 MOUSE_YROT 0.017874 
*MOUSE_XROT 0.021544 MOUSE_YROT 0.020427 
*MOUSE_XROT 0.007540 MOUSE_YROT 0.012767 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.008937 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.020427 
*MOUSE_YROT 0.006383 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.005107 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.005107 
*MOUSE_XROT 0.005386 MOUSE_YROT 0.008937 
*MOUSE_XROT 0.002154 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.004309 MOUSE_YROT 0.003830 
*MOUSE_XROT 0.008618 MOUSE_YROT 0.007660 
*MOUSE_YROT 0.012767 
*MOUSE_YROT 0.010214 
*MOUSE_YROT 0.015320 
*MOUSE_XROT -0.002154 MOUSE_YROT 0.012767 
*MOUSE_XROT -0.002154 
*MOUSE_YROT 0.002553 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.001077 
*MOUSE_XROT -0.001077 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.028007 MOUSE_YROT 0.002553 
*MOUSE_XROT -0.034471 MOUSE_YROT 0.001277 
*MOUSE_XROT -0.030162 MOUSE_YROT -0.001277 
*MOUSE_XROT -0.036625 MOUSE_YROT -0.008937 
*MOUSE_XROT -0.025853 MOUSE_YROT -0.012767 
*MOUSE_XROT -0.006463 MOUSE_YROT -0.002553 
*MOUSE_XROT -0.004309 MOUSE_YROT -0.005107 
*MOUSE_XROT -0.008618 MOUSE_YROT -0.007660 
*MOUSE_XROT -0.005386 MOUSE_YROT -0.003830 
*MOUSE_YROT 0.001277 
*MOUSE_XROT 0.003232 
*MOUSE_XROT 0.015081 MOUSE_YROT 0.008937 
*MOUSE_XROT 0.003232 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.002154 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.001077 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.005386 MOUSE_YROT 0.002553 
*MOUSE_XROT 0.001077 MOUSE_YROT 0.001277 
*MOUSE_XROT 0.001077 
*MDSPIN -1.000000 
*MDSPIN 1.000000 
*MDSPIN -1.000000 
#VIEW
#DBMS
#SAVE
!Enter object to save [SBA-AMP.PRT]: 

!SBA-AMP has been saved.
#MODE
#PART
#CREATE
!Enter Part name [PRT0001]: 
flatpac2up
@ ok
#FEATURE
#CREATE
#DATUM
#COORD SYS
!COORDINATE SYSTEM has been created successfully.
#CREATE
#DATUM
#PLANE
#DEFAULT
!DATUM PLANE has been created successfully.
#CREATE
#SOLID
#PROTRUSION
#EXTRUDE
#DONE
#BOTH SIDES
#DONE
!Select or create a SKETCHING PLANE.
0.678175 0.511467 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
!Select direction of viewing the sketching plane.
0.673639 0.508065 L
#FLIP
#OKAY
!Select or create a horizontal or vertical reference for sketching.
0.707661 0.382182 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
#MOUSE SKETCH
0.222278 0.420741 L
0.222278 0.459299 L
0.260837 0.461568 L
0.300529 0.538684 L
0.737147 0.540953 L
0.739415 0.463836 L
0.819934 0.462702 L
0.818800 0.423009 L
0.222278 0.424143 L
0.267641 0.413936 M
#QUIT
!Confirm request to quit.
#CONFIRM
!Section creation/modification aborted.
!Not all elements are defined. Select element(s) or action(s) from dialog box.
0.937878 0.407132 L
~ Activate `Odui_Dlg_01` `redefine`
!Select or create a SKETCHING PLANE.
#QUIT SEL
#QUIT PLANE
!Not all elements are defined. Select element(s) or action(s) from dialog box.
#ODUI_DLG_01
0.779108 0.399194 L
0.743952 0.467238 L
0.745086 0.461568 L
~ Activate `Odui_Dlg_01` `cancel`
~ Activate `0_std_confirm` `OK`
0.912928 0.561366 L
#CREATE
#PROTRUSION
#DONE
#BOTH SIDES
#DONE
!Select or create a SKETCHING PLANE.
0.704259 0.452495 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
!Select direction of viewing the sketching plane.
0.704259 0.452495 L
0.709929 0.449093 L
#OKAY
!Select or create a horizontal or vertical reference for sketching.
0.713332 0.393523 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
0.500126 0.420741 L
0.501260 0.457031 L
0.539819 0.460433 L
0.539819 0.538684 L
0.779108 0.539819 L
0.780242 0.462702 L
0.818800 0.462702 L
0.818800 0.423009 L
0.501260 0.424143 L
0.526210 0.412802 M
#DIMENSION
0.502394 0.435484 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
0 4
0.821069 0.427545 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
6 2
@ sel2d 0 POINT 
7 1
0.680444 0.385585 M
@ dimtype
 2
0.821069 0.458165 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 2
@ sel2d 0 POINT 
6 1
0.821069 0.462702 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 2
@ sel2d 0 POINT 
6 1
0.814264 0.460433 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 2
@ sel2d 0 POINT 
6 1
0.819934 0.461568 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 2
@ sel2d 0 POINT 
6 1
#DIMENSION
0.818800 0.461568 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 2
@ sel2d 0 POINT 
6 1
0.817666 0.421875 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
6 2
@ sel2d 0 POINT 
7 1
0.863029 0.437752 M
@ dimtype
 6
0.781376 0.538684 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
3 2
@ sel2d 0 POINT 
4 1
0.821069 0.459299 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 2
@ sel2d 0 POINT 
6 1
0.804057 0.555696 M
@ dimtype
 6
0.779108 0.538684 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
3 2
@ sel2d 0 POINT 
4 1
0.542087 0.538684 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.663432 0.571573 M
@ dimtype
 6
0.540953 0.537550 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.540953 0.460433 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.455897 0.502394 M
@ dimtype
 6
0.502394 0.455897 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.501260 0.424143 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
7 2
0.455897 0.441154 M
@ dimtype
 6
#DELETE
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.690650 0.386719 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
#DIMENSION
0.503528 0.426411 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
7 2
0.509199 0.424143 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
7 4
0.649824 0.326613 R
!Hidden geometry may be selected.
0.649824 0.326613 M
@ dimtype
 2
#DELETE
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.694052 0.325479 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
5 4
0.502394 0.442288 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
0 4
0.819934 0.441154 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
5 4
#DIMENSION
0.780242 0.537550 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.781376 0.461568 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
3 2
@ sel2d 0 POINT 
4 1
0.855091 0.503528 M
@ dimtype
 6
0.819934 0.459299 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
4 2
0.819934 0.423009 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 1
0.858493 0.442288 M
@ dimtype
 6
0.502394 0.430948 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 2
0.817666 0.421875 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 1
0.655494 0.375378 M
@ dimtype
 6
#MODIFY
#DIMENSION
0.502394 0.455897 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
0.540953 0.538684 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.516003 0.571573 M
@ dimtype
 6
#DELETE
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.683846 0.571573 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
#DIMENSION
0.781376 0.462702 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
3 2
@ sel2d 0 POINT 
4 1
0.818800 0.461568 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
4 2
0.804057 0.571573 M
@ dimtype
 6
0.503528 0.455897 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
0.501260 0.425277 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 2
0.455897 0.437752 M
@ dimtype
 6
#MODIFY
0.654360 0.374244 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
!Enter a new value [239.2900]: 
9.3
0.457031 0.437752 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
6 4
!Enter a new value [24.7800]: 
.5
0.459299 0.498992 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!Enter a new value [58.9700]: 

#DELETE
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.461568 0.508065 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.463836 0.502394 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
#DIMENSION
0.501260 0.426411 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 2
0.540953 0.537550 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.401462 0.488785 M
@ dimtype
 6
#MODIFY
0.401462 0.478579 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.404864 0.486517 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
6 4
!Enter a new value [86.3200]: 
1.37
0.518271 0.567036 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
!Enter a new value [29.0600]: 
.35
0.792717 0.577243 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.799521 0.569304 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
4 4
!Enter a new value [29.0600]: 
.65
0.861895 0.443422 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
!Enter a new value [29.9100]: 
.5
#DELETE
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.853957 0.498992 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
#REGENERATE
!Locate section with respect to part.
0.781376 0.537550 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.818800 0.421875 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
5 1
0.934476 0.480847 M
@ dimtype
 6
#MODIFY
0.944682 0.476310 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
6 4
!Enter a new value [88.0200]: 
1.37
#REGENERATE
!Locate section with respect to part.
0.502394 0.449093 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.501260 0.450227 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
0.468372 0.297127 M
@ dimtype
 2
#MODIFY
0.438886 0.299395 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
7 4
!Enter a new value [0.9500]: 
0
0.667969 0.421875 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.669103 0.423009 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
#DIMENSION
0.695186 0.423009 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
5 4
0.293725 0.419607 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
0.359501 0.399194 M
@ dimtype
 5
#MODIFY
0.395791 0.399194 L
@ sel view 0
 -1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 1.327015 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
8 4
!Enter a new value [1.7100]: 
0
#REGENERATE
!Underdimensioned section.  Please align to part or add dimensions.
~ Activate `Odui_Dlg_01` `cancel`
!Confirm request to quit.
!Section creation/modification aborted.
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `0_std_confirm` `OK`
#CREATE
#PROTRUSION
#DONE
#BOTH SIDES
#DONE
!Select or create a SKETCHING PLANE.
0.698589 0.467238 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
!Select direction of viewing the sketching plane.
#FLIP
#OKAY
!Select or create a horizontal or vertical reference for sketching.
0.709929 0.377646 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.502394 0.459299 L
0.818800 0.423009 M
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.818800 0.423009 R
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.500126 0.461568 L
0.819934 0.423009 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.540953 0.538684 L
0.819934 0.462702 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
#VIEW
#PAN/ZOOM
!Indicate two locations to define a box for the zoom area.
#ZOOM IN
!Indicate two locations to define a box for the zoom area.
0.413936 0.631678 L
0.886845 0.367440 L
!Indicate two locations to define a box for the zoom area.
#DIMENSION
0.500819 0.459872 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.500283 0.422330 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.464886 0.440565 M
@ dimtype
 6
0.501355 0.423939 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.819389 0.423939 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.659031 0.381034 M
@ dimtype
 6
0.501355 0.461481 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.541579 0.462553 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
4 2
@ sel2d 0 POINT 
5 1
@ sel2d 0 LINE 
3 4
0.523881 0.563916 M
@ dimtype
 6
0.541043 0.463090 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
4 2
@ sel2d 0 POINT 
5 1
@ sel2d 0 LINE 
3 4
0.541579 0.538173 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
4 1
@ sel2d 0 POINT 
7 2
0.465959 0.502241 M
@ dimtype
 6
0.554450 0.462553 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 LINE 
3 4
@ sel2d 0 LINE 
5 4
0.554450 0.460944 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 LINE 
3 4
@ sel2d 0 LINE 
5 4
0.554987 0.460944 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 LINE 
3 4
@ sel2d 0 LINE 
5 4
0.533534 0.460944 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 LINE 
3 4
0.567322 0.475425 M
!This dimension type is not allowed.
0.540506 0.537637 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
4 1
@ sel2d 0 POINT 
7 2
0.819389 0.538173 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
6 2
@ sel2d 0 POINT 
7 1
0.660640 0.562308 M
@ dimtype
 6
#MODIFY
0.464886 0.438956 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!Enter a new value [29.0600]: 
.
!Bad expression, please re-enter: 
.5
0.657422 0.378352 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
0.660640 0.381570 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
!Enter a new value [241.0000]: 
9.3
0.528707 0.563380 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 SKETCH_DIM 
2 4
!Enter a new value [30.7700]: 
.35
0.467568 0.500095 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
!Enter a new value [57.2600]: 
1.37-.5
0.825824 0.421794 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
0.832260 0.421794 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
0.827433 0.421257 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
0.660640 0.560162 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 SKETCH_DIM 
4 4
!Enter a new value [210.2300]: 
9.3-.35
#DIMENSION
0.827970 0.420185 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
0.819389 0.460944 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
@ sel2d 0 POINT 
5 2
@ sel2d 0 POINT 
6 1
0.846204 0.441637 M
@ dimtype
 2
0.828506 0.420721 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
0.819389 0.537101 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
6 2
@ sel2d 0 POINT 
7 1
0.864975 0.494732 M
@ dimtype
 2
0.541579 0.538173 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 POINT 
4 1
@ sel2d 0 POINT 
7 2
0.501892 0.591268 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
0.521199 0.591805 M
@ dimtype
 2
#MODIFY
0.519590 0.593414 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 SKETCH_DIM 
7 4
!Enter a new value [30.8600]: 
.35
0.864975 0.495805 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 SKETCH_DIM 
6 4
!Enter a new value [88.0200]: 
1.37
0.848349 0.442174 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 -1.327015 0.000000
 0.000000 0.000000 -1.327015 500.000000 421.875000 0.000000 2.114575 0.000000
@ sel2d 0 SKETCH_DIM 
5 4
!Enter a new value [29.9100]: 
.5
#REGENERATE
!Regeneration completed successfully.
!Regeneration completed successfully.
!EXTRA DIMENSIONS FOUND.
!Intersecting entities encountered in the section.
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
#VIEW
#PAN/ZOOM
!Indicate two locations to define a box for the zoom area.
#ZOOM OUT
!Indicate two locations to define a box for the zoom area.
#PAN
!Select new point for SCREEN CENTER.
0.474599 0.425548 L
!Select new point for SCREEN CENTER.
#REGENERATE
!Regeneration completed successfully.
!Regeneration completed successfully.
!EXTRA DIMENSIONS FOUND.
!Intersecting entities encountered in the section.
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.937020 0.425548 L
@ sel view 0
 74.216549 0.000000 0.000000 0.000000 -74.216549 0.000000
 0.000000 0.000000 -74.216549 148.489261 363.794962 0.000000 1.057288 0.000000
@ sel2d 0 SKETCH_DIM 
6 4
#REGENERATE
!Regeneration completed successfully.
!Regeneration completed successfully.
!EXTRA DIMENSIONS FOUND.
!Intersecting entities encountered in the section.
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.915567 0.375135 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
0.914495 0.378352 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
@ sel2d 0 SKETCH_DIM 
5 4
#REGENERATE
!Underdimensioned section.  Please align to part or add dimensions.
#CONSTRAINTS
#ALIGNMENT
0.806160 0.401950 L
0.692461 0.397660 L
0.693534 0.396587 L
~ Activate `constraints` `Select`
~ Select `constraints` `ConstrTypes` \
16 `Points_Coincident_C` `Equal_Coordinates_C` `Horizontal_C` `Vertical_C` \
`Point_on_Entity_C` `Tangent_C` `Perpendicular_C` `Equal_Radii_C` \
`Equal_Length_Lines_C` `Colinear_C` `90_Degree_Arc_C` `180_Degree_Arc_C` \
`Horizontal_Arc_C` `Vertical_Arc_C` `Symmetric_Points_C` `Conic_Point_C` 
0.569110 0.397660 L
0.569110 0.400878 L
0.569110 0.395514 L
0.568037 0.397660 L
0.569110 0.397660 L
~ Activate `constraints` `Preview`
!Underdimensioned section.  Please align to part or add dimensions.
#REGENERATE
~ Activate `constraints` `OK`
#REGENERATE
!Underdimensioned section.  Please align to part or add dimensions.
#BASELINE
#DELETE
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.085356 0.435201 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
#CONSTRAINTS
!Section was not regenerated. Unable to show constraints.
#CONSTRAINTS
!Section was not regenerated. Unable to show constraints.
#REGENERATE
!Underdimensioned section.  Please align to part or add dimensions.
#DIMENSION
0.149713 0.398732 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.041378 0.363336 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
0.041378 0.361190 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
#QUIT SEL
#DIMENSION
0.210853 0.466308 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
@ sel2d 0 LINE 
7 4
0.032797 0.360118 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
0.032797 0.361190 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
0.032797 0.362263 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
0.037088 0.357973 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
0.064976 0.361190 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
0.067121 0.353682 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
0.061758 0.349392 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
0.074630 0.352609 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
0.034942 0.365481 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
0.964908 0.360118 L
@ sel view 0
 76.203297 0.000000 0.000000 0.000000 -76.203297 0.000000
 0.000000 0.000000 -76.203297 151.283755 361.979246 0.000000 1.057288 0.000000
#EXIT
!Do you really want to exit? [N]: 
YES
@ confirm 1