!trail file version No. 876
!Pro/ENGINEER  TM  Release 16.0  (c) 1988-95 by Parametric Technology Corporation  All Rights Reserved.
!Select a menu item.
#ENVIRONMENT
#GRID SNAP
!Sketched entities and placed dimensions will snap to grid. 
#BELL
!Terminal bell is DISABLED for messages and prompts.
#PART
#LIST
!No files of this type are available.
#RETRIEVE
!Enter Part name  [-Quit-]: 

#CREATE
!Enter Part name [PRT0001]: 

@ ok
#LAYER
#DONE/RETURN
#SET UP
#GRID
!Select a coordinate system to be the origin of the grid.
#SET ORIGIN
!Select a coordinate system to be the origin of the grid.
#GRID ON
!You must set the origin of the grid for the grid to be shown.
!Grid will be shown when view of model is in valid orientation.
#DONE
#SET UP
#GRID
!Select a coordinate system to be the origin of the grid.
#PARAMETERS
!Select from the "Model Params" menu to modify part PRT0001
#UNITS
#DONE
#PARAMETERS
!Select from the "Model Params" menu to modify part PRT0001
#NOTES
#MASS PROPS
!File incomplete; Mass properties not assigned.
#GRID
!Select a coordinate system to be the origin of the grid.
#SEL BY MENU
!No names available for menu selection.
#QUERY SEL
!Hidden geometry may be selected.
#PICK
!Select visible geometry item.
#INTERCHANGE
#DONE
#FEATURE
#CREATE
#DATUM
#COORD SYS
!COORDINATE SYSTEM has been created successfully.
#DONE
#FEATURE
#DONE
#MODE
#PART
#CREATE
!Enter Part name [PRT0002]: 

@ ok
0.247758 0.705867 R
#MODE
#CHANGEWINDOW
!Select on a window to activate it.
0.958716 0.574448 L
#SET UP
#DONE
#QUIT WINDOW
#CHANGEWINDOW
!Select on a window to activate it.
0.939326 0.666011 L
#Change_Window 0
#FEATURE
#CREATE
#SOLID
#PROTRUSION
#EXTRUDE
0.576307 0.605687 M
#DONE
~ Activate `Odui_Dlg_01` `cancel`
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `0_std_confirm` `OK`
#CREATE
#SOLID
#DATUM
#PLANE
#DEFAULT
!DATUM PLANE has been created successfully.
#CREATE
#SOLID
#PROTRUSION
#EXTRUDE
0.579538 0.407480 L
#SOLID
#REVOLVE
#EXTRUDE
#DONE
~ Activate `Odui_Dlg_01` `cancel`
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `0_std_confirm` `OK`
#CREATE
#SURFACE
#QUIT
#CREATE
#DBMS
#SAVE AS
!Enter Object To Save [PRT0001.PRT]: 

!Enter TO: 

!Create object failed ,'PRT0001' in use.
#SAVE AS
!Enter Object To Save [PRT0001.PRT]: 
test1.prt
!'TEST1' does not exist in the database.
#SAVE AS
!Enter Object To Save [PRT0001.PRT]: 

!Enter TO: 
test1.prt
@ ok
!PRT0001 has been copied to TEST1.
#SURFACE
#MODE
#QUIT
#CREATE
#ENVIRONMENT
#DONE-RETURN
#DBMS
#MODE
#MISC
#LIST DIR
!Which directory ? [/afs/cs.cmu.edu/project/lri-4/Traverse-96/Members/jpt/proe/]: 

#LIST OPTIONS
#SKETCHER
#CREATE
!Enter Section name [S2D0001]: 

@ ok
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.252067 0.643389 M
0.254221 0.647698 L
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.204670 0.695095 L
0.754046 0.287910 M
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.206824 0.695095 L
0.850995 0.201733 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
#DIMENSION
0.198206 0.361160 L
@ sel view 0
 50.000000 0.000000 0.000000 0.000000 50.000000 0.000000
 0.000000 0.000000 50.000000 0.000000 0.000000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
0 4
0.848841 0.348234 L
@ sel view 0
 50.000000 0.000000 0.000000 0.000000 50.000000 0.000000
 0.000000 0.000000 50.000000 0.000000 0.000000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
2 4
0.581693 0.490425 M
@ dimtype
 5
0.523524 0.692941 L
@ sel view 0
 50.000000 0.000000 0.000000 0.000000 50.000000 0.000000
 0.000000 0.000000 50.000000 0.000000 0.000000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
3 4
0.540759 0.197425 L
@ sel view 0
 50.000000 0.000000 0.000000 0.000000 50.000000 0.000000
 0.000000 0.000000 50.000000 0.000000 0.000000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
1 4
0.512751 0.555058 M
@ dimtype
 5
#DIMENSION
0.594619 0.492580 L
@ sel view 0
 50.000000 0.000000 0.000000 0.000000 50.000000 0.000000
 0.000000 0.000000 50.000000 0.000000 0.000000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!This is not a baseline. Select again.
0.594619 0.483962 L
@ sel view 0
 50.000000 0.000000 0.000000 0.000000 50.000000 0.000000
 0.000000 0.000000 50.000000 0.000000 0.000000 0.000000 1.000000 0.000000
0.590311 0.490425 L
@ sel view 0
 50.000000 0.000000 0.000000 0.000000 50.000000 0.000000
 0.000000 0.000000 50.000000 0.000000 0.000000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!This is not a baseline. Select again.
#MODIFY
0.590311 0.483962 L
@ sel view 0
 50.000000 0.000000 0.000000 0.000000 50.000000 0.000000
 0.000000 0.000000 50.000000 0.000000 0.000000 0.000000 1.000000 0.000000
0.596774 0.486117 L
@ sel view 0
 50.000000 0.000000 0.000000 0.000000 50.000000 0.000000
 0.000000 0.000000 50.000000 0.000000 0.000000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!Enter a new value [13.0000]: 
5.0
0.514906 0.552904 L
@ sel view 0
 50.000000 0.000000 0.000000 0.000000 50.000000 0.000000
 0.000000 0.000000 50.000000 0.000000 0.000000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
!Enter a new value [10.0000]: 
3.0
#DONE SEL
#QUIT SEL
#DONE
!Unresolved section; REGENERATE before continuing.
#MODE
!Confirm request to quit.
#CONFIRM
#MODE
#LEGACY
#LEGACY PART
#RETRIEVE
!Enter Part name  [PRT0001]: 

<ESC>  
#QUIT
#MODE
#PART
#CREATE
!Enter Part name [PRT0003]: 

@ ok
#FEATURE
#CREATE
#DONE/RETURN
#DONE
#QUIT WINDOW
#PART
#CREATE
!Enter Part name [PRT0004]: 

@ ok
#FEATURE
#CREATE
#DATUM
#COORD SYS
!COORDINATE SYSTEM has been created successfully.
#CREATE
#PROTRUSION
#DONE
#BOTH SIDES
#DONE
!Select or create a SKETCHING PLANE.
#MAKE DATUM
!Select an option from the DATUM PLANE menu.
#QUIT
!Datum plane was not created.
#PLANE
0.519215 0.423639 L
@ sel view 0
 0.885045 -0.293114 -0.232601 0.000000 0.597303 -0.752697
 0.374191 0.693280 0.550153 500.000000 421.875000 0.000000 1.000000 0.000000
0.411494 0.490425 L
@ sel view 0
 0.885045 -0.293114 -0.232601 0.000000 0.597303 -0.752697
 0.374191 0.693280 0.550153 500.000000 421.875000 0.000000 1.000000 0.000000
#QUIT SEL
#QUIT PLANE
!Not all elements are defined. Select element(s) or action(s) from dialog box.
0.407185 0.481808 L
~ Activate `Odui_Dlg_01` `cancel`
~ Activate `0_std_confirm` `OK`
#CREATE
#DATUM
#PLANE
#DEFAULT
!DATUM PLANE has been created successfully.
#CREATE
#PROTRUSION
#DONE
#ONE SIDE
#DONE
!Select or create a SKETCHING PLANE.
0.754046 0.518433 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
!Arrow shows direction of feature creation. Pick FLIP or OKAY.
#OKAY
!Select or create a horizontal or vertical reference for sketching.
0.682950 0.514124 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
#QUIT
!Confirm request to quit.
#CONFIRM
!Section creation/modification aborted.
!Not all elements are defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `cancel`
~ Activate `0_std_confirm` `OK`
#DONE
#QUIT WINDOW
#PART
#RETRIEVE
!Enter Part name  [PRT0004]: 
prt0001
#FEATURE
#CREATE
#PROTRUSION
#DONE
#DONE
!Select or create a SKETCHING PLANE.
0.768050 0.564753 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
!Arrow shows direction of feature creation. Pick FLIP or OKAY.
#OKAY
!Select or create a horizontal or vertical reference for sketching.
0.640939 0.571216 L
@ sel view 0
 0.869977 -0.288123 -0.228641 0.000000 0.587134 -0.739882
 0.367820 0.681476 0.540786 500.000000 421.875000 0.000000 1.000000 0.000000
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.342552 0.299759 L
0.685105 0.575525 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
#DONE
!Unresolved section; REGENERATE before continuing.
#DONE
!Unresolved section; REGENERATE before continuing.
#DIMENSION
0.699109 0.299759 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.698031 0.581988 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.340398 0.580911 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
#DONE
!Unresolved section; REGENERATE before continuing.
#DIMENSION
0.699109 0.450569 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
2 4
0.713112 0.448414 M
@ dimtype
 1
0.628013 0.581988 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
1 4
0.617241 0.598146 M
@ dimtype
 1
#DONE
!Unresolved section; REGENERATE before continuing.
#MODIFY
0.717421 0.446260 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
0 4
!Enter a new value [210.0000]: 
210
0.615086 0.595992 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
1 4
!Enter a new value [270.0000]: 
210
#REGENERATE
!Locate section with respect to part.
#DONE
!Unresolved section; REGENERATE before continuing.
#QUIT
!Confirm request to quit.
#CANCEL
#REGENERATE
!Locate section with respect to part.
#REGENERATE
!Locate section with respect to part.
0.700186 0.262057 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.699109 0.299759 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
0.498748 0.418252 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.503057 0.417175 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
4 4
0.670024 0.284679 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.699109 0.300837 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
2 2
@ sel2d 0 POINT 
3 1
#DONE
!Unresolved section; REGENERATE before continuing.
0.511674 0.429025 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.518138 0.433333 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.503057 0.420407 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.499825 0.422561 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.339321 0.301914 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.501979 0.420407 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.499825 0.421484 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.499825 0.423639 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.503057 0.422561 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.511674 0.422561 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.523524 0.420407 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.499825 0.394554 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.539682 0.348234 M
0.510597 0.430102 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
#DONE
!Unresolved section; REGENERATE before continuing.
0.284383 0.622922 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
#DIMENSION
0.506288 0.423639 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.339321 0.297605 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
0.343630 0.298682 M
@ dimtype
 2
0.343630 0.360083 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
0 4
0.345784 0.362238 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
0 4
#REGENERATE
!Underdimensioned section.  Please align to part or add dimensions.
0.702340 0.579834 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
1 2
@ sel2d 0 POINT 
2 1
0.500902 0.423639 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
4 4
0.501979 0.425793 M
@ dimtype
 2
#REGENERATE
!Underdimensioned section.  Please align to part or add dimensions.
#DELETE
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.504134 0.422561 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
3 4
0.393181 0.294373 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 SKETCH_DIM 
2 4
0.341475 0.298682 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 1
@ sel2d 0 POINT 
3 2
#REGENERATE
!Locate section with respect to part.
#DELETE
!Select an option from the Deletion menu. Pick Done Sel when finished.
#delete item
0.670024 0.583065 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
0 4
0.699109 0.548595 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
0 4
0.589233 0.300837 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
0 4
#REGENERATE
!Locate section with respect to part.
!Regen failed. No entities to regenerate.
#SKETCH
#RECTANGLE
!Pick two points to indicate diagonal of box. Use middle-button to abort.
0.340398 0.265289 L
0.695877 0.601378 L
!Pick two points to indicate diagonal of box. Use middle-button to abort.
#DIMENSION
0.699109 0.587374 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
2 4
0.749737 0.508738 M
@ dimtype
 1
0.540759 0.620768 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 LINE 
1 4
0.543991 0.666011 M
@ dimtype
 1
0.338244 0.619691 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.324240 0.421484 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.269302 0.495812 M
@ dimtype
 2
0.339321 0.619691 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
@ sel2d 0 POINT 
0 2
@ sel2d 0 POINT 
1 1
0.498748 0.583065 L
@ sel view 0
 1.327015 0.000000 0.000000 0.000000 0.000000 -1.327015
 0.000000 1.327015 0.000000 500.000000 421.875000 0.000000 1.000000 0.000000
0.428729 0.643389 M
@ dimtype
 2
#REGENERATE
!Regeneration completed successfully.
#DONE
!Specify feature depth in direction indicated by the arrow.
#DONE
!Enter depth [117.01]:
200
!All elements have been defined. Select element(s) or action(s) from dialog box.
~ Activate `Odui_Dlg_01` `okay`
!PROTRUSION has been created successfully.
#VIEW
#SPIN
!Left button to select, right button to reset, middle button to abort.
*XROT -0.005562 
*XROT -0.166852 
*XROT -0.148313 
*XROT 0.222469 
*XROT 0.241009 
*XROT 0.092696 
#DONE-RETURN
#ENVIRONMENT
#SHADING
!Shaded model will be displayed
#HIDDEN LINE
!Hidden lines will appear in grey.  
#SHADING
!Shaded model will be displayed
#DONE-RETURN
!Processing model PRT0001 ...
#ENVIRONMENT
#SHADING
!Shaded model will be displayed
#WIREFRAME
!Model will be displayed in WIREFRAME display.
#DONE-RETURN
#CHANGEWINDOW
!Select on a window to activate it.
#MODE
#VIEW
#PAN/ZOOM
!Indicate two locations to define a box for the zoom area.
#PAN
!Select new point for SCREEN CENTER.
0.289769 0.461341 L
!Select new point for SCREEN CENTER.
#DONE-RETURN
#DBMS
#SAVE
!Enter object to save [PRT0001.PRT]: 
part1.prt
!'PART1' does not exist in the current session.
#RENAME
!Enter object to rename [PRT0001.PRT]: 
part1.part
!Enter TO: 

@ ok
!No object was renamed.
#RENAME
!Enter object to rename [PRT0001.PRT]: 

!Enter TO: 
part1.part
@ ok
!Cannot rename 'PRT0001' to 'PART1', different types.
#SAVE
!Enter object to save [PRT0001.PRT]: 

!PRT0001 has been saved.
#RENAME
!Enter object to rename [PRT0001.PRT]: 

!Enter TO: 
part1.prt
@ ok
!PRT0001 has been renamed to PART1.
#DONE-RETURN
#PART
#MODE
#ASSEMBLY
#CREATE
!Enter Assembly name [ASM0001]: 

@ ok
#COMPONENT
#ASSEMBLE
!Enter NAME [QUIT]:

#DONE/RETURN
#FEATURE
#COPY
#QUIT
#DONE/RETURN
#COMPONENT
#ASSEMBLE
!Enter NAME [QUIT]:
part1.prt
!COMPONENT has been created successfully.
#QUIT WINDOW
#QUIT WINDOW
#CHANGEWINDOW
!Select on a window to activate it.
0.683853 0.701168 L
#Change_Window 0
#EXIT
!Do you really want to exit? [N]: 
YES
@ confirm 1