Newsgroups: comp.robotics
Path: cantaloupe.srv.cs.cmu.edu!das-news2.harvard.edu!news2.near.net!news.mathworks.com!udel!gatech!howland.reston.ans.net!ix.netcom.com!netcom.com!mfogarty
From: mfogarty@netcom.com (Michael Fogarty)
Subject: Re: 68HC11 reset circuit
Message-ID: <mfogartyD7E9C2.DD7@netcom.com>
Organization: NETCOM On-line Communication Services (408 261-4700 guest)
X-Newsreader: TIN [version 1.2 PL1]
References: <3n41bs$n9k@spock.asic.sc.ti.com>
Date: Fri, 21 Apr 1995 16:48:01 GMT
Lines: 21
Sender: mfogarty@netcom9.netcom.com

Clay Timmons (ctimmons@asic.sc.ti.com) wrote:


: I'm building a 68HC11 board similar to Motorola's EVB
: for a dedicated display controller.  My question is
[snip]

I'm using a Dallas 1233.  A nice little part that comes in a TO-92
package that handles it all.  If you want a pushbutton reset, just
throw in a small cap in parallel with the switch.  My Dallas Semi
rep is in the Bay Area at 408 467 1200.

mfogarty
programmer
SRL

-- 
--------------------------------------------------------------------------
	  "I mistrust all systematizers and I avoid them.  The will
	to a system is a lack of integrity." - Friedrich Nietzsche,
					       _Twilight of the Idols_,
					       Maxims and Arrows No. 34.
--------------------------------------------------------------------------
