Newsgroups: comp.robotics
Path: brunix!sgiblab!darwin.sura.net!howland.reston.ans.net!pipex!uknet!EU.net!uunet!timbuk.cray.com!driftwood.cray.com!kilian
From: kilian@cray.com (Alan Kilian)
Subject: Re: Servo 6811
Message-ID: <1994May29.164151.17216@driftwood.cray.com>
Lines: 16
Nntp-Posting-Host: poplar010
Organization: Cray Research, Inc.
Date: 29 May 94 16:41:51 CDT


There is software on cherupahka.media.mit.edu in   /pub/incoming/servo8.asm
that controlls 8 model RC servos with a 68HC811E2 running at 8 mHz.

Also someone mentioned that the normal voltage was 5.8 volts
and I think that is wrong. My servos use 4 NiCd batteries which is 4.8 volts
I use 5.0 volts to drive my servos. 6.0 volts might or might not be too much.


               -Alan Kilian

-- 
 -Alan Kilian    kilian@cray.com 612.683.5499 (Work)
 I have a house for rent.  Avail July 1: 2 bedroom, 2-car garage fenced backyard
 Wood floors, central A/C, washer/dryer, dishwasher/garbage disposal. Fireplace.
 Gardens back and front Immaculate. $750 + utils. 3835 20TH Ave S Mpls MN
