Newsgroups: comp.robotics
Path: brunix!sgiblab!swrinde!cs.utexas.edu!uunet!psinntp!relay1!unislc!mgc
From: mgc@unislc.slc.unisys.com (Marc Christensen)
Subject: Re: PIC proto boards
X-Newsreader: TIN [version 1.2 PL0]
References: <2fal0d$kjf@handler.Eng.Sun.COM> <CIHv7E.H8x@fc.hp.com>
Message-ID: <1993Dec23.192940.17480@unislc.slc.unisys.com>
Organization: Unisys Corporation SLC
Date: Thu, 23 Dec 1993 19:29:40 GMT
Lines: 19

Floyd Moore (red@fc.hp.com) wrote:
: Chuck McManis (cmcmanis@pepper.Eng.Sun.COM) wrote:
: : I remember seeing an Advertisement for a company that sold blank
: : PIC prototyping boards (18 pin and 28 pin) but I can't find their
: : ad! Basically the board had the PIC pinout plus pads for an R/C or
: : crystal oscillator and some proto area. Any pointers would be appreciated.

: : -- 
: : --Chuck McManis			     All opinions in this message/article are
: : FirstPerson Inc.                     those of the author, who may or may not
: : Internet: cmcmanis@firstperson.COM   be who you think it is.

: I have a question regarding using a PIC in robotics.  Is there a version
: which includes a simple A/D converter?  

The 16c71 has 4 A/D converter inputs with 8 Bit Outputs.
It's an 18 Pin part.

Marc Christensen
