Return-path: <atkbb+Bad-Addresses@andrew.cmu.edu>
X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from
po3.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/cZm4at:00UkTI=gE4x>;    
      Thu,  1 Feb 90 09:37:46 -0500 (EST) Received: from
po3.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q002/QF.AZm4XWq00UkT0=dE4I>;        
  Thu,  1 Feb 90 09:34:22 -0500 (EST) Received: from sparc01.icase.edu
([192.42.142.50]) by po3.andrew.cmu.edu (5.54/3.15) id <AA02945> for
info-andrew; Thu, 1 Feb 90 09:31:50 EST Received: by sparc01.icase.edu
(4.0/SMI-DDN) 	id AA27796; Thu, 1 Feb 90 09:27:08 EST Received: from
Version.6.23.N.CUILIB.3.44.SNAP.NOT.LINKED.sparc01.Unknown.Machine.Type 
         via MS.5.5.sparc01.sun4_40;           Thu,  1 Feb 90 09:27:05
-0500 (EST) Message-Id: <sZm4Qtz0-csm1fxJo5@sparc01> Date: Thu,  1 Feb
90 09:27:05 -0500 (EST) From: Tom Crockett <tom@icase.edu> To:
zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!ark1!ophiuchi!dsill@thi
nk.com     (Dave Sill) Subject: Re: R4 contrib problems Cc:
info-andrew@andrew.cmu.edu In-Reply-To:
<1990Jan31.204640.7131@relay.nswc.navy.mil> References:
<1990Jan31.204640.7131@relay.nswc.navy.mil> 
> *Excerpts from xpert: 31-Jan-90 R4 contrib problems Dave
Sill@think.com* > *(2435)* 
> (SPARCstation 1, unpatched R4) 
> I've had trouble with several things under R4's contrib: 
> 1. Andrew 
>     After following the configuration instructions in README and >
running imake, I type `make World'.  It blows up with: 
> ../.././config/depend.csh   //usr/include/X11 > "cc"
/usr/andrew/bin/class "-I.  -I/usr/andrew/include/atk >
-I/usr/andrew/include >  -I//usr/include/X11" > usage: depends ${DEPEND}
${BASEDIR} ${XINCDIR} ${CC} ${CLASS} > ${INCLUDES} [${AFS > BASEDIR}] >
*** Error code 1 > make: Fatal error: Command failed for target `depend'
> Current working directory
/wk/tape-4/contrib/toolkits/andrew/overhead/sys 
> Examing the Makefile in overhead/sys, I find: 
> depend:: >       $(DEPENDSCRIPT) $(/usr/bin/X11/makedepend)
$(/wk/andy) $(XINCDIR) >       "$(CC)" $(CLASS) "-I. $(LOCALINCLUDES)
$(INCLUDES)" 
> The problem is apparently the superfluous $() around $XMAKEDEPEND and
> $BASEDIR.  I've been unable to locate the Imakefile or template >
responsible for this line.  Any ideas? 

Well, I'm trying to build the same thing on my SPARCstation, and I
haven't seen that problem at all.  You might want to doublecheck your
"site.h" and "site.mcr" files.  I had a different problem when I omitted
a trailing newline from the last line of my "site.mcr" file. 
My current problem is that "make World" always dies in atk/ness/doc
where "nessrun" aborts with an illegal instruction exception.  I've
tried lots of combinations of compiler options, patched vs. unpatched
sources, etc., and nothing seems to help.  Has anyone seen anything
similar?  The problem does not seem to be specific to "nessrun", because
if I pick up and continue building everything else with "make
dependInstall", most of the other apps die with the same error.  The
only thing I've changed at all in the source distribution from the R4
tape is adding "site.h" and "site.mcr" files.  (I'm quite sure of this,
I even restored everything from tape to be sure I had clean sources --
unless the tape is mucked up.)  My "site.h" and "site.mcr" files follow.
 I'm using Sun's cc compiler with no optimization, although I get the
same behavior whether or not I use -O. 
--- site.mcr --- 
/* site.mcr file for ICASE Sun 4's */ 
XBASEDIR = /usr/icase/X11R4 CDEBUGFLAGS = -pipe XUTILDIR =
$(XBASEDIR)/bin XINCDIR = $(XBASEDIR)/include/X11 XMKFONTDIR =
$(XUTILDIR)/mkfontdir XLIBDIR = $(XBASEDIR)/lib XFC =
$(XUTILDIR)/bdftosnf RESOLVLIB = /usr/lib/libresolv.a 
#define ConstructMFLAGS 

--- site.h --- 
/* site.h file for ICASE Sun 4's */ 
#define MK_BLD_BLKS             1 #define MK_BASIC_UTILS          1
#define MK_BASIC_INSETS         1 #define MK_HELP                 1
#define MK_TEXT_EXT             1 #define MK_AUTHORING            1
#define MK_AUX_UTILS            1 #define MK_AUX_INSETS           1
#define MK_EXAMPLES             1 
#undef LINKINSTALL_ENV 
/* Change this if we ever get ditroff! */ #undef  DITROFF_ENV 
#undef  DEFAULT_ANDREWDIR_ENV #define DEFAULT_ANDREWDIR_ENV  
/usr/icase/X11R4/andrew 
#undef  DEFAULT_LOCALDIR_ENV #define DEFAULT_LOCALDIR_ENV   
/usr/icase/X11R4/andrew/local 

Tom Crockett 
ICASE Institute for Computer Applications in Science and Engineering
M.S. 132C                               e-mail:  tom@icase.edu NASA
Langley Research Center            phone:  (804) 864-2182 Hampton,  VA 
23665-5225 
Return-path: <atkbb+Bad-Addresses@andrew.cmu.edu>
X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from
andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/MZmVcIy00Ui38d704J>;    
      Fri,  2 Feb 90 18:39:01 -0500 (EST) Received: from
po3.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q003/QF.4ZmVYHq00UkTASok5j>;        
  Fri,  2 Feb 90 18:34:49 -0500 (EST) Received: from ucbvax.Berkeley.EDU
by po3.andrew.cmu.edu (5.54/3.15) id <AA07874> for info-andrew; Fri, 2
Feb 90 18:33:26 EST Received: by ucbvax.Berkeley.EDU (5.61/1.41) 	id
AA01228; Fri, 2 Feb 90 15:25:58 -0800 Received: from USENET by
ucbvax.Berkeley.EDU with netnews 	for info-andrew@andrew.cmu.edu
(info-andrew@andrew.cmu.edu) 	(contact usenet@ucbvax.Berkeley.EDU if you
have questions) Date: 2 Feb 90 22:41:50 GMT From:
auspex!guy@uunet.uu.net  (Guy Harris) Organization: Auspex Systems,
Santa Clara Subject: Re: rofftext...please be gentle with me Message-Id:
<2885@auspex.auspex.com> References: <17108@ultima.cs.uts.oz>,
<oZilWMK00VsP00XlBS@andrew.cmu.edu> Sender:
info-andrew-request@andrew.cmu.edu To: info-andrew@andrew.cmu.edu 
>There is now a toez command which converts Scribe or troff/nroff to ez. 
Yes, but it appears to just be another application wrapper around the
"rofftext" object, just as "rofftext" itself is.  However, while 
	toez -ms <your input file> 
worked OK (<your input file> being the slice of the input file you
provided), "rofftext -t -ms <your input file>" didn't.  Furthermore,
neither "rofftext" *nor* "toez" did anything with the following: 
-------------------------------Cut
Here---------------------------------------- .LP The Xmu Library is a
collection of miscellaneous (some might say random) utility functions
that have been useful in building various applications and widgets. 
This library is required by the Athena Widgets.
-------------------------------Cut
Here---------------------------------------- 
where "rofftext" was run with "-ms" ("-t" or not "-t" didn't matter),
and "toez" was run with "-ms" as well ("-troff" or not "-troff" didn't
matter). 
"nroff -ms <that file>" did work, however.  The "-ms" macro package here
is the standard SunOS 4.0.3 one; differences between the various "-ms"
packages may account for these problems. Return-path:
<atkbb+Bad-Addresses@andrew.cmu.edu> X-Andrew-Authenticated-as:
0;andrew.cmu.edu;Network-Mail Received: from po5.andrew.cmu.edu via
trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/gZmdwke00UddANPk4W>;    
      Sat,  3 Feb 90 04:06:57 -0500 (EST) Received: from
po3.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q001/QF.sZmdu3K00UkTEovE4a>;        
  Sat,  3 Feb 90 04:04:12 -0500 (EST) Received: from ucbvax.Berkeley.EDU
by po3.andrew.cmu.edu (5.54/3.15) id <AA13532> for info-andrew; Sat, 3
Feb 90 04:02:57 EST Received: by ucbvax.Berkeley.EDU (5.61/1.41) 	id
AA05009; Sat, 3 Feb 90 01:00:51 -0800 Received: from USENET by
ucbvax.Berkeley.EDU with netnews 	for info-andrew@andrew.cmu.edu
(info-andrew@andrew.cmu.edu) 	(contact usenet@ucbvax.Berkeley.EDU if you
have questions) Date: 3 Feb 90 03:10:16 GMT From:
auspex!guy@uunet.uu.net  (Guy Harris) Organization: Auspex Systems,
Santa Clara Subject: Re: rofftext...please be gentle with me Message-Id:
<2888@auspex.auspex.com> References: <17108@ultima.cs.uts.oz>,
<oZilWMK00VsP00XlBS@andrew.cmu.edu>, <2885@auspex.auspex.com> Sender:
info-andrew-request@andrew.cmu.edu To: info-andrew@andrew.cmu.edu 
>The "-ms" macro package here is the standard SunOS 4.0.3 one;
>differences between the various "-ms" packages may account for these
>problems. 
In fact, it probably *does* account for it, in combination with a
"rofftext" bug.  The document 
	.de XX 	.de YY 	\.. 	.. 	.XX 	Hello, world 
when run with "rofftext" with no extra arguments (i.e., no "-ms")
produces an empty document, with "Hello, world" nowhere in it.  I think
"rofftext" can't cope with macros that define macros, as "XX" does
there, and as do several macros in the SunOS 4.0.3 "-ms" macro package
(and perhaps in other variants of "-ms" as well). Return-path:
<mss+@andrew.cmu.edu> X-Andrew-Authenticated-as:
1342;andrew.cmu.edu;Mark Sherman Received: from mss.andrew.cmu.edu via
trymail           ID
</afs/andrew.cmu.edu/usr22/susan/Mailbox/UZnN7yO00VsA0vN096>;          
Mon,  5 Feb 90 09:47:26 -0500 (EST) Received: from mss.andrew.cmu.edu
via qmail           ID
</afs/andrew.cmu.edu/usr18/mss/.Outgoing/QF.kZnN6q600VsA4vG2lT>;        
  Mon,  5 Feb 90 09:46:14 -0500 (EST) Received: from
Messages.7.14.N.CUILIB.3.45.SNAP.NOT.LINKED.mss.andrew.cmu.edu.rt.r3    
      via MS.5.6.mss.andrew.cmu.edu.rt_r3;           Mon,  5 Feb 90
09:46:13 -0500 (EST) ReSent-Message-ID:
<QZnN6py00VsAIvG2cT@andrew.cmu.edu> ReSent-Date: Mon,  5 Feb 90 09:46:13
-0500 (EST) ReSent-From: Mark Sherman <mss+@andrew.cmu.edu> ReSent-To:
"Sohan C. Ramakrishna-Pillai" <sohan+@andrew.cmu.edu>,     Susan Straub
<susan+@andrew.cmu.edu> Return-path: <zs01+@andrew.cmu.edu> Message-ID:
<8ZmZ8OW00asBExHlF9@andrew.cmu.edu> Date: Fri,  2 Feb 90 22:38:02 -0500
(EST) From: Zalman Stern <zs01+@andrew.cmu.edu> To: Mark Sherman
<mss+@andrew.cmu.edu>, sean@dsl.pitt.edu (Sean McLinden) Subject: Re:
Andrew on DECStation 3100 (getting -g 0 libraries) CC: To:
sean@dsl.pitt.edu; Subject: Re: Andrew on DECStation 3100 (getting -g 0
libraries) CC: In-Reply-To: <QZl3CJW00VsAE61mF8@andrew.cmu.edu>
References: <9001281540.AA14060@cadre.dsl.pitt.edu>,
	<QZl3CJW00VsAE61mF8@andrew.cmu.edu> In-Reply-To:
<QZl3CJW00VsAE61mF8@andrew.cmu.edu> References:
<9001281540.AA14060@cadre.dsl.pitt.edu>,
	<QZl3CJW00VsAE61mF8@andrew.cmu.edu> 
Mark Sherman <mss+@andrew.cmu.edu> writes: > Did you check with Zalman
Stern here? (zs01+) As an IBM project, we certainly > don`t get any
special treatment from DEC, but I think we managed to get the > -g 0
libraries (at least Zalman got it working here when he did the port). > 
            -Mark 

The ITC doesn't get any special treatment from DEC, but Academic
Computing may have when they made it clear that they weren't buying very
many 3100s if ATK didn't run on them. Anyway, DEC gave them the sources
to libc and Sohan and I managed to get them compiled so everything
worked. Basiaclly, you need to compile all of libc with the -G 0 switch.
You also need a -G 0 libm.a. I used sources off of uunet to do that. 
Sincerely, Zalman Stern Return-path: <mss+@andrew.cmu.edu>
X-Andrew-Authenticated-as: 1342;andrew.cmu.edu;Mark Sherman Received:
from mss.andrew.cmu.edu via trymail           ID
</afs/andrew.cmu.edu/usr22/susan/Mailbox/IZnN85S00VsA4vNE8w>;          
Mon,  5 Feb 90 09:47:33 -0500 (EST) Received: from mss.andrew.cmu.edu
via qmail           ID
</afs/andrew.cmu.edu/usr18/mss/.Outgoing/QF.oZnN6x600VsAEvG34V>;        
  Mon,  5 Feb 90 09:46:21 -0500 (EST) Received: from
Messages.7.14.N.CUILIB.3.45.SNAP.NOT.LINKED.mss.andrew.cmu.edu.rt.r3    
      via MS.5.6.mss.andrew.cmu.edu.rt_r3;           Mon,  5 Feb 90
09:46:20 -0500 (EST) ReSent-Message-ID:
<wZnN6wy00VsAEvG2w6@andrew.cmu.edu> ReSent-Date: Mon,  5 Feb 90 09:46:20
-0500 (EST) ReSent-From: Mark Sherman <mss+@andrew.cmu.edu> ReSent-To:
"Sohan C. Ramakrishna-Pillai" <sohan+@andrew.cmu.edu>,     Susan Straub
<susan+@andrew.cmu.edu> Return-path: <sean@cadre.dsl.pitt.edu> Date:
Fri, 2 Feb 90 23:44:55 -0500 From: sean@dsl.pitt.edu (Sean McLinden)
Message-Id: <9002030444.AA07216@cadre.dsl.pitt.edu> To:
mss+@andrew.cmu.edu, zs01+@andrew.cmu.edu Subject: Re: Andrew on
DECStation 3100 (getting -g 0 libraries) Cc: To.sean@dsl.pitt.edu; 
In theory, there should be no problem in placing the binaries for the
libraries in a public directory for FTP. Sun does that all of the time
since their libraries are, typically, out of date with respect to
standard ARPA services. 
The problem with compiling Berkeley sources is that there is assembly
language code for some of the most commonly used routines. Once *could*
simply extract those from the distributed archive and compile the rest
with -G 0. 
I dunno if the problem would not occur if the GNU C compiler were used. 
Is it possible that the compiled libraries could be posted, somewhere? 
Sean Return-path: <atkbb+Bad-Addresses@andrew.cmu.edu>
X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from
andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/0ZnSa:W00Ui3ETA05U>;    
      Mon,  5 Feb 90 16:01:02 -0500 (EST) Received: from
po5.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q005/QF.IZnSXZO00UddQDx04W>;        
  Mon,  5 Feb 90 15:58:15 -0500 (EST) If-Type-Unsupported: alter
Received: from po3.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q001/QF.sZnSWNG00UkTIU=E46>;        
  Mon,  5 Feb 90 15:57:07 -0500 (EST) Received: from att-in.att.com by
po3.andrew.cmu.edu (5.54/3.15) id <AA06794>; Mon, 5 Feb 90 13:57:43 EST
From: jis@mtgzx.att.com Received: from mtgz046 by gazelle.att.com
(4.0/SMI-4.0) 	id AA10421; Mon, 5 Feb 90 12:58:27 EST Received: by
mtgz046 (4.0/SMI-4.0) 	id AA01995; Mon, 5 Feb 90 12:58:48 EST Received:
from
Messages.7.14.N.CUILIB.3.45.SNAP.NOT.LINKED.mtgz046.gazelle.att.com.sun3.
4           via MS.5.6.mtgz046.gazelle.att.com.sun4_40;           Mon, 
5 Feb 90 12:58:45 -0500 (EST) Message-Id:
<4ZnPvJy753w787mEUY@gazelle.att.com> Date: Mon,  5 Feb 90 12:58:45 -0500
(EST) >From: Jishnu Mukerji <mtgzx.att.com!jis> X-Andrew-Message-Size:
535+0 Content-Type: X-BE2; 12 To: Info-Andrew
<andrew.cmu.edu!info-andrew+@mtgzx.att.com> Subject: Does the suborder
preference work? 
 Return-path: <atkbb+Bad-Addresses@andrew.cmu.edu>
X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from
andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/8ZnT5bm00Ui34VMk5K>;    
      Mon,  5 Feb 90 16:34:32 -0500 (EST) Received: from andrew.cmu.edu
via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q006/QF.AZnT2ym00Ui3EVFk4U>;        
  Mon,  5 Feb 90 16:31:47 -0500 (EST) If-Type-Unsupported: alter
Received: from po3.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q007/QF.YZnT1P:00UkTAVuk47>;        
  Mon,  5 Feb 90 16:30:10 -0500 (EST) Received: from apollo.transarc.com
by po3.andrew.cmu.edu (5.54/3.15) id <AA08663> for info-andrew+; Mon, 5
Feb 90 16:27:59 EST Received: by apollo.transarc.com (5.57/Ultrix3.0-C)
	id AA01031; Mon, 5 Feb 90 16:27:43 EST Received: from
Messages.7.8.N.CUILIB.3.45.SNAP.NOT.LINKED.apollo.transarc.com.pmax.3   
       via MS.5.6.apollo.transarc.com.pmax_3;           Mon,  5 Feb 90
16:27:41 -0500 (EST) Message-Id: <MZnSzBH0BwwO43xUUD@transarc.com> Date:
Mon,  5 Feb 90 16:27:41 -0500 (EST) From: Craig_Everhart@transarc.com
X-Andrew-Message-Size: 297+0 Content-Type: X-BE2; 12 To: Info-Andrew
<info-andrew+@andrew.cmu.edu>, jis@mtgzx.att.com Subject: Re: Does the
suborder preference work? In-Reply-To:
<4ZnPvJy753w787mEUY@gazelle.att.com> References:
<4ZnPvJy753w787mEUY@gazelle.att.com> 
 Return-path: <atkbb+Bad-Addresses@andrew.cmu.edu>
X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from
andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/oZnTlja00Ui3IYEU5r>;    
      Mon,  5 Feb 90 17:21:37 -0500 (EST) Received: from
po3.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q006/QF.0ZnTjau00UkTEYTU5U>;        
  Mon,  5 Feb 90 17:19:31 -0500 (EST) Received: from ucbvax.Berkeley.EDU
by po3.andrew.cmu.edu (5.54/3.15) id <AA09327> for info-andrew; Mon, 5
Feb 90 17:18:30 EST Received: by ucbvax.Berkeley.EDU (5.61/1.41) 	id
AA12116; Mon, 5 Feb 90 14:12:40 -0800 Received: from USENET by
ucbvax.Berkeley.EDU with netnews 	for info-andrew@andrew.cmu.edu
(info-andrew@andrew.cmu.edu) 	(contact usenet@ucbvax.Berkeley.EDU if you
have questions) Date: 5 Feb 90 22:01:15 GMT From:
saturn!barry@ames.arc.nasa.gov  (Barry Lustig) Organization: Advanced
Decision Systems, Mountain View, CA  94043, (415) 960-7300 Subject:
Annotating a mail message using messages Message-Id:
<10745@saturn.ADS.COM> Sender: info-andrew-request@andrew.cmu.edu To:
info-andrew@andrew.cmu.edu 

Is it possible to edit a mail message while reading it under messages?
When I try to edit it in the bottom window, it says that the message is
read only. 

barry Return-path: <atkbb+Bad-Addresses@andrew.cmu.edu>
X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from
po2.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/MZnjCHK00jZd88KU5n>;    
      Tue,  6 Feb 90 10:56:08 -0500 (EST) Received: from
po3.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q001/QF.IZnj4fK00UkT4CgU5v>;        
  Tue,  6 Feb 90 10:45:58 -0500 (EST) Received: from
thumper.bellcore.com by po3.andrew.cmu.edu (5.54/3.15) id <AA03742> for
info-andrew+; Tue, 6 Feb 90 10:44:39 EST Received: by
thumper.bellcore.com (5.54/4.7) 	id AA00517; Tue, 6 Feb 90 10:43:06 EST
Received: by greenbush.bellcore.com (4.12/4.7) 	id AA06023; Tue, 6 Feb
90 10:44:06 est Received: from
Messages.7.14.N.CUILIB.3.45.SNAP.NOT.LINKED.greenbush.sins.sun4.40      
    via MS.5.6.greenbush.sins.sun4_40;           Tue,  6 Feb 90 10:44:04
-0500 (EST) Message-Id: <gZnj34K0M2YtAKpfNX@thumper.bellcore.com> Date:
Tue,  6 Feb 90 10:44:04 -0500 (EST) From: Nathaniel Borenstein
<nsb@thumper.bellcore.com> Cc: info-andrew+@andrew.cmu.edu To:
saturn!barry@ames.arc.nasa.gov (Barry Lustig) Subject: PS -- Re:
Annotating a mail message using messages In-Reply-To:
<10745@saturn.ADS.COM> References: <10745@saturn.ADS.COM> 
[This is a PS to an answer I sent to Barry alone; however, I thought of
a more useful answer, which I'm now sending to the whole list.) 
Although the general answer is "no", you can hack around this by
treating the message as a "draft" -- use "restore draft" to get it into
the sending window, edit it there, and then use "file into folder" to
put it back.  That will do the trick, albeit somewhat cruftily. 
I always intended to make messages really editable, but never got around
to it.  -- Nathaniel Return-path: <atkbb+Bad-Addresses@andrew.cmu.edu>
X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from
po3.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/kZnlT5y00UkT0M005y>;    
      Tue,  6 Feb 90 13:30:30 -0500 (EST) Received: from
po3.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q004/QF.QZnlPxy00UkTALuE4E>;        
  Tue,  6 Feb 90 13:27:19 -0500 (EST) Received: from
thumper.bellcore.com by po3.andrew.cmu.edu (5.54/3.15) id <AA06090> for
info-andrew; Tue, 6 Feb 90 13:24:16 EST Received: by
thumper.bellcore.com (5.54/4.7) 	id AA09051; Tue, 6 Feb 90 13:22:53 EST
Received: by bali.bellcore.com (4.12/4.7) 	id AA03169; Tue, 6 Feb 90
13:24:13 est Received: from
Messages.7.14.N.CUILIB.3.45.SNAP.NOT.LINKED.bali.sins.sun4.40          
via MS.5.6.bali.sins.sun4_40;           Tue,  6 Feb 90 13:24:11 -0500
(EST) Message-Id: <QZnlN=G0M2YkE7D3xt@thumper.bellcore.com> Date: Tue, 
6 Feb 90 13:24:11 -0500 (EST) From: Steve Rohall
<slr@thumper.bellcore.com> To: info-andrew@andrew.cmu.edu Subject:
problem linking ATK with Oracle... 
My guess is that my problem is an oracle bug, but nsb said that he
remembered seeing something similar on the net at one time, so here
goes... 
I have an application that uses the Oracle relational database system
and also uses ATK for a front end.  Recently we upgraded from V5 Oracle
to V6.  At the same time we upgraded to the latest release of X and
Andrew.  Now when I try to link everything together (either by making
multiple calls to ld and then calling makedo or by calling makedo with
my object and all the necessary libraries) I get an error of an
undefined symbol "uname".  I called Oracle and they told me that Oracle
V6 is System5 cc-compatible and that I should include a System5 libc.a
at the end of my list of libraries.  I make the change and then dofix
gives me an undefined symbol of "end".  Using the System5 c compiler
produces the same result.  Does this sound vaguely familiar to anyone?
Is it possible that the problem lies in the Oracle libs which were
undoubtedly compiled with Sys5 cc?  Any thoughts would be appreciated. 
			-Steve. 
+----------------------------------------------------------------------+
| Steven L. Rohall                                                     |
|                                                                      |
| MRE 2B-284                    ____                                   |
| 445 South Street             /   /  ____  / / ____  ____  ____  ____ |
| Morristown, NJ 07960-1910   /---<  /___/ / / /     /   / /   / /___/ |
| vox: (201)829-5203         /____/ /___  / / /___  /___/ /     /___   |
| fax: (201)829-7019                                                   |
| slr@thumper.bellcore.com                                             |
| ...!bellcore!thumper!slr                                             |
+----------------------------------------------------------------------+
X-Added: With Flames (itcbb v2.1) Return-path: <mp2k+@andrew.cmu.edu>
X-Andrew-Authenticated-as: 1564;andrew.cmu.edu;Michael Palmquist
Received: from grantville.andrew.cmu.edu via trymail for
info-andrew-bugs+@andrew.cmu.edu (->itcbb+itc.apars.in)           ID
</afs/andrew.cmu.edu/usr0/itcbb/Mailbox/0Zo8CRa00W060CmE4I>;          
Wed,  7 Feb 90 15:22:55 -0500 (EST) Received: from
grantville.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/usr4/mp2k/.Outgoing/QF.IZo8C9G00W068CAnkl>;        
  Wed,  7 Feb 90 15:22:34 -0500 (EST) Received: from
Messages.7.8.N.CUILIB.3.45.SNAP.NOT.LINKED.grantville.andrew.cmu.edu.rt.r
3           via MS.5.6.grantville.andrew.cmu.edu.rt_r3;           Wed, 
7 Feb 90 15:22:32 -0500 (EST) Message-ID:
<4Zo8C8W00W06MCAnc3@andrew.cmu.edu> Date: Wed,  7 Feb 90 15:22:32 -0500
(EST) From: Michael Palmquist <mp2k+@andrew.cmu.edu>
X-Andrew-Message-Size: 333+0 Content-Type: X-BE2; 12
If-Type-Unsupported: send To: Info-Andrew-Bugs
<info-andrew-bugs+@andrew.cmu.edu> Subject: query replace bug 
 Return-path: <atkbb+Bad-Addresses@andrew.cmu.edu>
X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from
po3.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/kZo9tSO00UkTIa005Z>;    
      Wed,  7 Feb 90 17:17:29 -0500 (EST) Received: from
po3.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q004/QF.oZo9nU200UkT8Zqk5F>;        
  Wed,  7 Feb 90 17:10:55 -0500 (EST) Received: from cadre.dsl.pitt.edu
by po3.andrew.cmu.edu (5.54/3.15) id <AA08163>; Wed, 7 Feb 90 15:33:12
EST Received: by cadre.dsl.pitt.edu (5.61/1.34) 	id AA18461; Wed, 7 Feb
90 15:30:21 -0500 Date: Wed, 7 Feb 90 15:30:21 -0500 From:
sean@dsl.pitt.edu (Sean McLinden) Message-Id:
<9002072030.AA18461@cadre.dsl.pitt.edu> To: info-andrew@andrew.cmu.edu
Subject: Has anyone managed to bring up Andrew on a native DECStation
3100? 

We have been having serious problems dealing with the dynamically
loadable code and they don't seem tobe resolved by using a libc.a
compiled with the "-G 0" option. 
Any pointers would be appreciated. 
Sean McLinden Decision Systems Laboratory University of Pittsburgh
Return-path: <atkbb+Bad-Addresses@andrew.cmu.edu>
X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from
po5.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/8ZoD6LK00UddAKuU5J>;    
      Wed,  7 Feb 90 23:12:08 -0500 (EST) Received: from
po3.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q002/QF.UZoD5:q00UkTQIi04l>;        
  Wed,  7 Feb 90 23:10:51 -0500 (EST) Received: from uunet.uu.net by
po3.andrew.cmu.edu (5.54/3.15) id <AA05299> for info-andrew; Wed, 7 Feb
90 23:10:26 EST Received: from munnari.UUCP by uunet.uu.net (5.61/1.14)
with UUCP 	id AA07285; Wed, 7 Feb 90 23:09:19 -0500 Received: from
munnari.OZ.AU by murtoa.cs.mu.OZ.AU with SMTP (5.61+IDA+MU) 	id AA11214;
Thu, 8 Feb 1990 10:25:06 +1100 	(from grahamd@otc.otca.oz for )
Received: from otc.otca.oz (via basser) by munnari.oz.au with SunIII
(5.61+IDA+MU) 	id AA05284; Thu, 8 Feb 90 10:25:02 +1100 	(from
grahamd@otc.otca.oz for info-andrew@andrew.cmu.edu) Received: (via otc)
by otc (5.61) 	id AA01393; Thu, 8 Feb 90 11:10:16 +1100 	(from
grahamd@otc.otca.oz for info-andrew%andrew.cmu.edu@munnari.cs.mu.oz)
Received: from
Messages.7.14.N.CUILIB.3.45.SNAP.NOT.LINKED.griffin.otca.oz.au.sun3.4   
       via MS.5.6.griffin.otca.oz.au.sun3_4;           Thu,  8 Feb 90
10:11:03 +1100 (EST) Message-Id: <4Zo_g7K6bk8nE=ZEhA@otc.otca.oz> Date:
Thu,  8 Feb 90 10:11:03 +1100 (EST) From: Graham Dumpleton
<munnari!otc.otca.oz.au!grahamd@uunet.UU.NET> To:
info-andrew@andrew.cmu.edu Subject: System wide AMS alias file 
We are running AMS on our system but since only a limited number of
users have any sort of workstation running X only a few are actually
using the messages program. Because of this I have set the
AMS_UsersHandleFormatting to 'no', meaning that whenever anyone sends a
message with formatting to someone in the local domain they are asked if
they wish to send with formatting etc. Now I can make things better by
using the $forceformat option in individuals .AMS_aliases files so that
if they do send formatted mail to Andrew users then they don't get asked
about formatting etc. The problem with this is that each person has
their own list of who is currently using Andrew, meaning that if someone
else starts using Andrew it has to be added to each individuals aliases
file. My question is, can I have a system wide AMS aliases file which I
can put $forceformat lines in for each user using Andrew, and then have
this included in individuals aliases files using and include statement
or for messages to check it directly. I have looked in various help
files but didn't find anything which helped to answer this. 
Also we are having trouble getting people to use AMS, currently they use
the MH mail system and a number of users are worried about the fact that
once mail is read into AMS its name gets munged and its not easy to get
it back out into MH. I know about cui and that it could be used as a
replacement for MH on tty terminals but it is no where near as easier to
use as MH or vmail which runs on top of MH. Is there a way which AMS can
look at the same files as MH, not munge names and use its files for
keeping track of which items have been read etc. 
Graham Dumpleton (grahamd@otc.otca.oz.au) Return-path:
<atkbb+Bad-Addresses@andrew.cmu.edu> X-Andrew-Authenticated-as:
0;andrew.cmu.edu;Network-Mail Received: from po5.andrew.cmu.edu via
trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/oZoOth600UddMDh05r>;    
      Thu,  8 Feb 90 12:37:50 -0500 (EST) Received: from andrew.cmu.edu
via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q004/QF.IZoOq7C00Ui38El04p>;        
  Thu,  8 Feb 90 12:34:04 -0500 (EST) If-Type-Unsupported: alter
Received: from andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q006/QF.8ZoOpKi00Ui38EkE4Q>;        
  Thu,  8 Feb 90 12:33:13 -0500 (EST) Received: from apollo.transarc.com
by andrew.cmu.edu (5.54/3.15) id <AA04265> for info-andrew+; Thu, 8 Feb
90 12:32:06 EST Received: by apollo.transarc.com (5.57/Ultrix3.0-C) 	id
AA10055; Thu, 8 Feb 90 12:30:47 EST Received: from
Messages.7.8.N.CUILIB.3.45.SNAP.NOT.LINKED.apollo.transarc.com.pmax.3   
       via MS.5.6.apollo.transarc.com.pmax_3;           Thu,  8 Feb 90
12:30:45 -0500 (EST) Message-Id: <YZoOn530BwwOMayVBG@transarc.com> Date:
Thu,  8 Feb 90 12:30:45 -0500 (EST) From: Craig_Everhart@transarc.com
X-Andrew-Message-Size: 2094+0 Content-Type: X-BE2; 12 Reply-To:
Craig_Everhart@transarc.com To: Info-Andrew
<info-andrew+@andrew.cmu.edu> Subject: Re: System wide AMS alias file
In-Reply-To: <4Zo_g7K6bk8nE=ZEhA@otc.otca.oz> References:
<4Zo_g7K6bk8nE=ZEhA@otc.otca.oz> 
 Return-path: <atkbb+Bad-Addresses@andrew.cmu.edu>
X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from
po5.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/0ZoRFTm00Udd02O05E>;    
      Thu,  8 Feb 90 15:19:45 -0500 (EST) Received: from
po5.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q001/QF.cZoRCFi00Udd82Jk44>;        
  Thu,  8 Feb 90 15:16:19 -0500 (EST) Received: from po2.andrew.cmu.edu
via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/sq1/QF.UZoKShy00jZdQ15kkA>;         
 Thu,  8 Feb 90 07:36:34 -0500 (EST) Received: from po3.andrew.cmu.edu
via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q000/QF.4ZoKSES00UkTE7iU53>;        
  Thu,  8 Feb 90 07:35:29 -0500 (EST) Received: from sparc01.icase.edu
([192.42.142.50]) by po3.andrew.cmu.edu (5.54/3.15) id <AA01974> for
info-andrew; Thu, 8 Feb 90 07:35:15 EST Received: by sparc01.icase.edu
(4.0/SMI-DDN) 	id AA06903; Thu, 8 Feb 90 07:32:40 EST Received: from
Version.6.23.N.CUILIB.3.44.SNAP.NOT.LINKED.sparc01.Unknown.Machine.Type 
         via MS.5.5.sparc01.sun4_40;           Thu,  8 Feb 90 07:32:38
-0500 (EST) Message-Id: <IZoKPaz0-csm0Ouoxr@sparc01> Date: Thu,  8 Feb
90 07:32:38 -0500 (EST) From: Tom Crockett <tom@icase.edu> To:
info-andrew@andrew.cmu.edu Subject: Re: System wide AMS alias file
In-Reply-To: <4Zo_g7K6bk8nE=ZEhA@otc.otca.oz> References:
<4Zo_g7K6bk8nE=ZEhA@otc.otca.oz> 
> *Excerpts from info-andrew: 8-Feb-90 System wide AMS alias file
Graham* > *Dumpleton@uunet.u (1709)* 
> My question is, can I have a system wide AMS aliases file which I >
can put $forceformat lines in for each user using Andrew, and then have
> this included in individuals aliases files using and include statement
> or for messages to check it directly. 
Our environment sounds a lot like yours.  We would also be interested in
a site-wide .AMS_aliases file which would be scanned along with that of
individual users. 
_Tom Crockett_ 
*ICASE* Institute for Computer Applications in Science and Engineering 
M.S. 132C                               e-mail:  tom@icase.edu NASA
Langley Research Center            phone:  (804) 864-2182 Hampton,  VA 
23665-5225 
Return-path: <atkbb+Bad-Addresses@andrew.cmu.edu>
X-Andrew-Authenticated-as: 0;andrew.cmu.edu;Network-Mail Received: from
po5.andrew.cmu.edu via trymail for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/oZoTNQa00Udd45Kk5N>;    
      Thu,  8 Feb 90 17:44:51 -0500 (EST) Received: from
po3.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q004/QF.oZoTIR:00UkTIBCk4I>;        
  Thu,  8 Feb 90 17:39:27 -0500 (EST) Received: from po5.andrew.cmu.edu
via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/sq2/QF.UZoN:qe00Udd01cmIa>;         
 Thu,  8 Feb 90 10:39:50 -0500 (EST) Received: from po3.andrew.cmu.edu
via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q005/QF.wZoN9Sa00UkT4DME4X>;        
  Thu,  8 Feb 90 10:38:07 -0500 (EST) Received: from
thumper.bellcore.com by po3.andrew.cmu.edu (5.54/3.15) id <AA03930> for
info-andrew; Thu, 8 Feb 90 10:37:19 EST Received: by
thumper.bellcore.com (5.54/4.7) 	id AA19814; Thu, 8 Feb 90 10:35:40 EST
Received: by greenbush.bellcore.com (4.12/4.7) 	id AA09562; Thu, 8 Feb
90 10:36:42 est Received: from
Messages.7.14.N.CUILIB.3.45.SNAP.NOT.LINKED.greenbush.sins.sun4.40      
    via MS.5.6.greenbush.sins.sun4_40;           Thu,  8 Feb 90 10:36:39
-0500 (EST) Message-Id: <wZoN87K0M2Yt8Yy348@thumper.bellcore.com> Date:
Thu,  8 Feb 90 10:36:39 -0500 (EST) From: Nathaniel Borenstein
<nsb@thumper.bellcore.com> To: info-andrew@andrew.cmu.edu Subject: Re:
System wide AMS alias file In-Reply-To: <4Zo_g7K6bk8nE=ZEhA@otc.otca.oz>
References: <4Zo_g7K6bk8nE=ZEhA@otc.otca.oz> 
There's not currently a system-wide alias file, but I too have come to
realize (since leaving the more homogeneous CMU environment) that it
would be a very useful thing to have, for precisely the reason you
mentioned.  It should be pretty easy; at some point, I might even do it
and send CMU a patch. 
As for the MH compatibility question -- there is a feature in AMS (the
"alien tree" feature) that was designed for AMS/MH/Netnews
interoperability, but it has not been heavily used, and probably can be
counted on to be a little buggy.  I'm not sure if it is documented at
all, but I know a few people have tried it.  Perhaps one of them can
comment on whether it works, and how well.  -- Nathaniel Return-path:
<atkbb+Bad-Addresses@andrew.cmu.edu> X-Andrew-Authenticated-as:
0;andrew.cmu.edu;Network-Mail Received: from andrew.cmu.edu via trymail
for info-andrew+@andrew.cmu.edu
(->+dist+/afs/andrew.cmu.edu/usr0/ak99/dists/info-andrew-strip.dl)      
    ID </afs/andrew.cmu.edu/usr22/susan/Mailbox/cZogj8G00Ui3E6HU46>;    
      Fri,  9 Feb 90 08:55:22 -0500 (EST) Received: from
po2.andrew.cmu.edu via qmail           ID
</afs/andrew.cmu.edu/service/mailqs/q005/QF.IZogfUS00jZdEFBk4a>;        
  Fri,  9 Feb 90 08:51:58 -0500 (EST) Received: from arisia.Xerox.COM by
po2.andrew.cmu.edu (5.54/3.15) id <AA02639>; Thu, 8 Feb 90 20:31:19 EST
Received: from holmes.parc.Xerox.COM by arisia.Xerox.COM with SMTP
	(5.61+/IDA-1.2.8/gandalf) id AA02111; Thu, 8 Feb 90 17:28:48 -0800
Received: by holmes.parc.xerox.com 	(5.61+/IDA-1.2.8/gandalf) id
AA03600; Thu, 8 Feb 90 17:28:41 PST Received: from
Messages.7.14.N.CUILIB.3.45.SNAP.NOT.LINKED.holmes.PARC.sun4.40         
 via MS.5.6.holmes.PARC.sun4_40;           Thu,  8 Feb 90 17:28:40 -0800
(PST) Message-Id: <AZoVn8QB0KGWQ5rwd3@holmes.PARC> Date: Thu,  8 Feb 90
17:28:40 -0800 (PST) From: Bill Janssen <janssen@parc.xerox.com>
Enclosure: ---- Enclosure ---- To: Info-Andrew
<info-andrew+@andrew.cmu.edu>, Craig_Everhart@transarc.com Subject: Re:
System wide AMS alias file In-Reply-To:
<YZoOn530BwwOMayVBG@transarc.com> References:
<4Zo_g7K6bk8nE=ZEhA@otc.otca.oz>, 	<YZoOn530BwwOMayVBG@transarc.com> 
For those of us who have users with GNU Emacs "rmail" bound to their
brains, here's an elisp function to display an ATK mail message from
rmail: 

---- Enclosure ---- (defun rmail-show-message-as-andrew-object ()  
"View andrew mail message from RMAIL"   (interactive)   (if (or (eq
window-system 'x) 	  (getenv "DISPLAY"))       (let (from to date
subject body body-begin msg-end) 	(save-excursion 	  (save-restriction 	
   (setq msg-end (rmail-msgend rmail-current-message)) 	    (widen) 	   
(goto-char (rmail-msgbeg rmail-current-message)) 	    (forward-line 1) 	
   (narrow-to-region 	     (if (= (following-char) ?0) 		 (progn
