Newsgroups: comp.robotics
Path: brunix!cat.cis.Brown.EDU!agate!howland.reston.ans.net!torn!mach1!skar7950
From: skar7950@mach1.wlu.ca (Raymond Skarratt u)
Subject: CDN Miniboard source:LAST CALL!
X-Newsreader: TIN [version 1.1 PL6]
Message-ID: <Cp1FKK.pI@mach1.wlu.ca>
Organization: Wilfrid Laurier University
Date: Fri, 29 Apr 1994 20:29:07 GMT
Lines: 67


This is the last call for people who want to get in on this round of
miniboards.

The following is the information that you need.  If you would like to
order I would like to hear from you by Tuesday May 3.  

IF YOU DON'T GET IN ON THIS ORDER PRICES WILL GO UP FOR THE NEXT ONE!

Also note that this is a Candian source, I will send to the states but 
it would probably be cheaper to go through Mark Reeves.  You can find
his information (suprisingly similar to mine) by ftp at cher.media.mit.edu.

So here is the information, let me know by Tuesday.

----------------------------------------------------------------------------
I am pleased to announce that I will sell kits for the Mini Board.
This is a service for Canadians that would like to avoid dollar 
troubles.

These boards will use the new version of the Mini Board designed by
Fred Martin of MIT.  Info about the board can be found at FTP site
cherupakha.media.mit.edu.
This board is a little bigger than the previous version, and has a
space for a power switch, power plug, and 2 mounting holes.

All kits come with parts as outlined in the Mini Board Docs by Fred
Martin.  All kits also come with battery voltage level parts, a 
MC68HC11E2 cpu, 256 bytes ram, 2k EEPROM, 8 A/D inputs, etc.
All kits have battery voltage level parts included.

POLICY

Shipping - E-mail your interest in a kit(s).  You will receive instructions
as to what is currently happening with orders.  This message will be part
of those instructions.  Orders and checks or MO's will be taken until there
are a total of ten or more kits ordered.  Checks and MO's will no be cashed
untill I have the kits ready to go out.  MO's will get cleared and sent out
first, checks will have to get cleared by the bank then once cleared the 
kits will be sent out.


KIT INFO (price subject to change without notice, parts may change with
          notice)

basic kit all parts needed to get a board up and going, plus 
motor controller the full kit with all needed parts, with 
all LEDs and motor controller chips, three RJ11 jacks for interconnecting
with other boards.
     $80.00              

All motor controller chips are the TI version, 1A drive
current.  All prices are subject to change without notice; please
e-mail to check if prices have gone up or down since this posting.

Cost of kit includes shipping in CANADA via Canada Post.  If you would
like to ship differently, let me know and we can set something up.

Make checks or MO's payable to:
RAYMOND SKARRATT

Mail checks or MO's to:
Raymond Skarratt
31 Devere Dr.
Guelph, Ontario
N1G 2T2

