Newsgroups: comp.robotics
Path: brunix!sgiblab!darwin.sura.net!howland.reston.ans.net!cs.utexas.edu!convex!cnn.exu.ericsson.se!news
From: exujet@exu.ericsson.se (Jerry Ethridge)
Subject: Re: schematic
Message-ID: <1994Mar22.220032.26328@exu.ericsson.se>
Sender: news@exu.ericsson.se
Nntp-Posting-Host: s08a04.exu.ericsson.se
Reply-To: exujet@exu.ericsson.se
Organization: Ericsson Network Systems, Inc.
References: <F6cLJc1w165w@sfrsa.com>
Date: Tue, 22 Mar 1994 22:00:32 GMT
X-Disclaimer: This article was posted by a user at Ericsson.
              Any opinions expressed are strictly those of the
              user and not necessarily those of Ericsson.
Lines: 23

In article F6cLJc1w165w@sfrsa.com, errant@sfrsa.com (tod gunther) writes:
>does anyone out there have a schematic for producing a dog bark?
>
>
>


My suggestion would be to use the recording chip that Radio-Shack
sells. I think it will record up to 20 sec of sound, or any other
low bandwidth data. This would be a single chip solution and I'm
sure you could find many dogs to volunteer for the recording.

Jerry

---
===============================================================================
Jerry Ethridge		     Richardson, Tx.                 |
ERICSSON NETWORK SYSTEMS                                    /O\
exujet@exu.ericsson.se                            \_______[|(.)|]_______/
                                                    o   ++   O   ++   o
===============================================================================


