Newsgroups: comp.robotics
Path: brunix!news.Brown.EDU!agate!howland.reston.ans.net!noc.near.net!das-news.harvard.edu!honeydew.srv.cs.cmu.edu!rochester!rit!isc-newsserver!ritvax.isc.rit.edu!DYH2631
From: dyh2631@ritvax.isc.rit.edu
Subject: Automated soldering and spot welding
Message-ID: <1994Mar18.032330.1684@ultb.isc.rit.edu>
Sender: news@ultb.isc.rit.edu (USENET News System)
Nntp-Posting-Host: vaxa-eth.isc.rit.edu
Reply-To: dyh2631@ritvax.isc.rit.edu
Organization: Rochester Institute of Technology
Date: Fri, 18 Mar 1994 03:23:30 GMT
Lines: 13

I am working on the assembly workcell for a very small (12 mm) stepper motor
I need more information on how automated soldering is done 
To solder a printed circut ribbon to the contact posts on the coils

Also the case of the motor is to be spotwelded where the two halves of the 
case butt together

Can anyone direct me to a good source of info on these topics
and/or can anyone share there personal experiance on the subject

Thank you
David Hartmann
Rochester Institute of Technology
