Newsgroups: comp.robotics
Path: brunix!sgiblab!uhog.mit.edu!europa.eng.gtefsd.com!howland.reston.ans.net!torn!mach1!skar7950
From: skar7950@mach1.wlu.ca (Raymond Skarratt u)
Subject: Interest in CDN Miniboard source
X-Newsreader: TIN [version 1.1 PL6]
Message-ID: <CMo3w2.L65@mach1.wlu.ca>
Organization: Wilfrid Laurier University
Date: Mon, 14 Mar 1994 18:40:49 GMT
Lines: 30


Hi all!

I posted this last week so for all of you that have already read it
I'm sorry.  I'm re-posting because at my end anyway it seems to be 
gone.

So here it is:

I'm wondering if there is any interst out there in a Canadian source for
Miniboards and 6.27 board PCB's and parts kits.

I know myself that I would rather buy from a Canadian source just to 
avoid the dollar fluctuations and possible shipping problems.

So please let me know if you and/or people you know would be interested
in such a source. 

If I get a good response I will start to seriously look into getting the
PCB's printed up and I will then let you know about prices and all that.

Please note: I will only go ahead with this if there is enough interest.
But I will let you know either way.  

I would hope to get shipping stuff if all goes well by the middle/end of
May

Thanks in advance,
Ray
skar7950@mach1.wlu.ca
