Newsgroups: comp.robotics
Path: brunix!news.Brown.EDU!noc.near.net!howland.reston.ans.net!zaphod.mps.ohio-state.edu!darwin.sura.net!cs.ucf.edu!ton
From: ton@engr.ucf.edu (Toan Nguyenphu)
Subject: Miniboard download mode failure
Message-ID: <1993Apr17.003833.5321@cs.ucf.edu>
Sender: news@cs.ucf.edu (News system)
Organization: engineering, University of Central Florida, Orlando
Date: Sat, 17 Apr 1993 00:38:33 GMT
Lines: 23


This is the first time I am posting on the net, so please bare with me...

The RCV led lit when I connected the RS232 line to the miniboard.  Turned on  
the power supply and the RCV led was off and the PWR led was on dimly.  The   
slide switch was already in the download (away from 68HC11) position.  The 
PWR led was still dimly lit when I pressed the reset button.  According to
the manual by Fred Martin, the board will NOT be in download mode if the 
PWR (red) led is on fully or dimly.

Please let me know what I can do to fix this problem.

Thanks in advance.

===========================================================================
===  Toan Nguyenphu                                                     ===
===  Dept. of Elec. & Comp. Engineering                                 ===
===  University of Central Florida                                      ===
===  (407) 823-5484                                                     ===
===  ton@engr.ucf.edu                                                   ===
===========================================================================


