Newsgroups: comp.robotics
Path: brunix!sgiblab!zaphod.mps.ohio-state.edu!uwm.edu!linac!att!cbnews!wrb
From: wrb@cbnews.cb.att.com (wallace.r.blackburn)
Subject: Miniboard: R1-2 - chips?!?
Organization: AT&T
Distribution: usa
Date: Fri, 9 Apr 1993 19:02:52 GMT
Message-ID: <1993Apr9.190252.9176@cbnews.cb.att.com>
Keywords: miniboard
Lines: 22

I'm getting parts together for the Miniboard parts buy, and I got some from
Digi-key today.  R1 and R2 are the precision 10K and 20K resistors.  I used
the part numbers from the list and got chip-type (i.e. surface-mount)
resistors.

It's hard to tell, but from the picture of the Miniboard in the docs, you
can't see resistors in these spots on the component side.  Does the list
have the wrong part numbers or are you supposed to solder the SMD resistors
to the solder side of the board?

I thought I would just give it a try, but I've got $23 worth of resistors,
and I want to send them back if they're not the right kind.  Thanks.



+===============================+   Happy user of OS/2 2.0!
| Wally Blackburn		|   Ask me about it!
| wrb@ccsitn.att.com		|
| AT&T NSD			|   
| Amateur Radio Station AA8DX	|   Clinton-Gore - Socialist Leadership
| 614-575-6604			|		   for the 90's!
+===============================+
