Newsgroups: comp.robotics
Path: cantaloupe.srv.cs.cmu.edu!das-news2.harvard.edu!fas-news.harvard.edu!newspump.wustl.edu!news.ecn.bgu.edu!psuvax1!news.pop.psu.edu!news.cac.psu.edu!howland.reston.ans.net!spool.mu.edu!caen!night.primate.wisc.edu!relay!relay2!csampso
From: csampso@relay.nswc.navy.mil (Charles Sampson - E81)
Subject: Re: I want to build a robot
Message-ID: <1995Mar13.150615.19061@relay.nswc.navy.mil>
Sender: news@relay.nswc.navy.mil
Organization: NSWC
References: <3jsfq1$5vu@smartsun.smartnet.net> <3jud4r$iga@newsbf02.news.aol.com>
Date: Mon, 13 Mar 1995 15:06:15 GMT
Lines: 13

In article <3jud4r$iga@newsbf02.news.aol.com>, robt909@aol.com (ROBT909) writes:
|> There is interface information in the Robot Builders Bonanza (book, much
|> panned for errors in schematics and other info).  You can easily hook your
|> project up to rs-232 port, and program in basic.  Start out by just making
|> the various axis' move  and then combine the modules into a program.
|> 
|> ROB.T. 

Would you mind giving a source for this?

Thanks 
Charlie Sampson

