Newsgroups: comp.robotics
Path: cantaloupe.srv.cs.cmu.edu!rochester!udel!gatech!howland.reston.ans.net!news.sprintlink.net!news.indirect.com!s57.tucslip.indirect.com!user
From: scott@ioinc.tucson.az.us (Scott Forbes)
Subject: Re: 68hc11  getting started
Message-ID: <scott-1102952210420001@s57.tucslip.indirect.com>
Sender: usenet@indirect.com (Internet Direct Admin)
Organization: Internet Direct, indirect.com
Date: Sun, 12 Feb 1995 05:10:42 GMT
References: <Pine.ULT.3.90.950210161055.7639B-100000@osuunx.ucc.okstate.edu>
X-Newsreader: Value-Added NewsWatcher 2.0b24.0+
Lines: 13

In article
<Pine.ULT.3.90.950210161055.7639B-100000@osuunx.ucc.okstate.edu>, Michael
Fox <fox@osuunx.ucc.okstate.edu> wrote:

> ... I have also looked for books/articles on programming the hc11
> and found a minimum amount of information. ...

Have you seen Motorola's "MC68HC11 Reference Manual"?  It goes into
*excruciating* detail on every aspect of the processor.  I found it at JDR
Microdevices for about $9.  The Buffalo monitor mentioned in this group
also provides a good set of example code.

 -- Scott
