Newsgroups: comp.robotics
Path: brunix!cat.cis.Brown.EDU!agate!howland.reston.ans.net!wupost!gumby!newsxfer.itd.umich.edu!nntp.cs.ubc.ca!alberta!quartz.ucs.ualberta.ca!tribune.usask.ca!canopus.cc.umanitoba.ca!bison!draco!baden
From: baden@draco.bison.mb.ca (Baden de Bari)
Subject: [*]  Best fr. SCRATCH Robotics HW?
Keywords: help
Organization: The Draco Unix System
Date: Fri, 29 Apr 1994 08:11:24 GMT
Message-ID: <1994Apr29.081124.15647@draco.bison.mb.ca>
Lines: 23


	I would like to know what others have done with microprocessor
hook-ups to the AT slots / regular slots that give the MAXIMUM number of
8-bit sets for either input or output, depending on the flag set to each I/O
port of the microprocessor   (for A/D hook-ups).  ie:  Send data to M chip
for ADC #5 and forget.  Have input come from ADC #6 and read info from that
- feedback from what ADC #5 is controlling. 

	I've experamented with the Z80 / NEC 780, but I would like to hear
anyone else's work please!
 
		Thanks.


----------------------------------------------------------------------
Words Wise and Otherwise...              /\                           
Your son at five is your master, at ten  ||      Baden de Bari
 your slave, at fifteen your double and  || baden@draco.bison.mb.ca
 after that, your friend or your foe,    || baden@sys6626.bison.mb.ca
 depending on his bringing up.           ||                          
            -HASDI IBN SHAPRUT           \/
----------------------------------------------------------------------

