Newsgroups: comp.robotics
Path: brunix!news.Brown.EDU!noc.near.net!MathWorks.Com!uhog.mit.edu!news.media.mit.edu!fredm
From: fredm@media.mit.edu (Fred G Martin)
Subject: Re: Forth on 6.270 boards
Message-ID: <1993Oct13.031733.10086@news.media.mit.edu>
Sender: news@news.media.mit.edu (USENET News System)
Organization: MIT Media Laboratory
References: <1993Oct5.191036.26711@CSD-NewsHost.Stanford.EDU> <29fles$7kn@skates.gsfc.nasa.gov>
Distribution: usa
Date: Wed, 13 Oct 1993 03:17:33 GMT
Lines: 15

In article <29fles$7kn@skates.gsfc.nasa.gov>
nstn@quercus.gsfc.nasa.gov (Nathan Stratton) writes: 

>I am using a 6.270 board to control my robot, I would like to know if there
>is a Forth for the board???

You can use the F6811, version of the 6811 with Forth burned into its
12K mask ROM.  These will work fine in the 6.270 board.

Source:  New Micro's Inc, 1601 Chalk Hill Road, Dallas, TX
Work Phone:              (214) 339-2204
fax:                     (214) 339-1585

Cheers,
Fred Martin
