Newsgroups: comp.robotics
Path: brunix!uunet!timbuk.cray.com!hemlock.cray.com!kilian
From: kilian@cray.com (Alan Kilian)
Subject: Re: remote control servos
Message-ID: <1993Jul30.171714.26761@hemlock.cray.com>
Lines: 11
Nntp-Posting-Host: gopher
Organization: Cray Research, Inc.
Date: 30 Jul 93 17:17:14 CDT


The code I wrote to control 8 hobby servos with an MC68HC11 is
on cher.media.mit.edu in /pub/incoming/servo8.asm

If you are using this code from a Miniboard change PORTB to PORTC and
add code to store a $FF to the DDRC register during startup.

      -Alan Kilian

-- 
 -Alan Kilian           kilian@cray.com 612.683.5499 (Work) 612.721.3990 (Home)
