Newsgroups: comp.robotics
Path: brunix!news.Brown.EDU!noc.near.net!howland.reston.ans.net!zaphod.mps.ohio-state.edu!cs.utexas.edu!csc.ti.com!tilde.csc.ti.com!fstop.csc.ti.com!usenet
From: a186430@moe.dseg.ti.com (Andrew Cilia)
Subject: Re: comp.robotics
Message-ID: <C6Mqtz.4E@csc.ti.com>
Sender: usenet@csc.ti.com
Nntp-Posting-Host: s809.dseg.ti.com
Reply-To: a186430@moe.dseg.ti.com
Organization: Forest Lane Design Center
References: <04MAY93.16091937.0216@UNBVM1.CSD.UNB.CA>
Date: Fri, 7 May 1993 00:03:34 GMT
Lines: 11



 I may be of help here,

 If you see my posting "STEPPER/PWM control from PC you could use
my board to control a relay (or up to twelve if you are so inclined).

If there is enough interest I will build the board  (commercial quality) and 
sell it for $55. 


