Newsgroups: comp.robotics,alt.toys.lego
Path: brunix!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!gratclif
From: gratclif@magnus.acs.ohio-state.edu (Gregory W Ratcliff)
Subject: Miniboard 2.0 Parts buy...
Message-ID: <1993Mar12.050030.13628@magnus.acs.ohio-state.edu>
Sender: news@magnus.acs.ohio-state.edu
Nntp-Posting-Host: magnusug.magnus.acs.ohio-state.edu
Organization: The Ohio State University
Date: Fri, 12 Mar 1993 05:00:30 GMT
Lines: 112


The miniboard parts buy continues...

To prevent any delays in the build the
ABSOLUTE cutoff date is 3/15/93.   Deadbeats beware!! I am  only getting
a few extra parts to cover miscounts and Post Office problems.  Anyone
else interested in joining us is welcome, just don't delay. 

If you really MUST have a kit give me a call over the weekend.
Of course you will have to tape record the sound of the check sliding into
the mailbox.

Thanks everyone, especially steve, ginny, and eric.... The OSU
parts counting team.

Checks received before 3/1/93 were acknowledged already,
email me if you still don't know for sure.

I will make just one more post on the 16th for final acks.

Checks have been received between 3/1/93 and 3/12/93
from the following persons:

Herbert Yang
Daikim Loo
Chris Hufnagel
Demetri P. Patukas
Chris Beasley
Russel Houldin
Lee Hounshell
Scott Brock
Russel Weatherly
Ennio Cellucci
David R. Smith
Patrick Ferrell
Alan Kamas
Cliff Lum
Thomas E. Rowley
Dennis Lynch
Ron McEwen
Eric Conger
Jeffrey Murphy
R. Mark Adams
Hal Finney
Steve Bennett
Man-on Yan
Pete Mooers
Matthew McMalcom?
Tony Cambell
Ron M. Battle
Stan Jefferson
Steven Caranci
Fredrik Wilhelmsen
Frank Richter 
Allen Johnson
Chuck Rice
Karl Altenburg
Carl Hamilton
John R. Strohm
Jeff Pelz
Craig Berrett
Randy L. Just
Bruce Barnes

Details on kits:



Miniboard parts kits are available
from Greg Ratcliff.

PCB :

$6.00 each.  4 pages of Fred Martins docs ,front and back,
blank PCB, shipping US included. I plan to keep a few on
hand for a while.

Parts kit:

$66.00 each.  All parts that are attached to the PCB.  Solder
these parts to the board above and apply power.  (does NOT include
pcb)

DOCs:

$2.00 each. The complete set of documentation from Fred Martin.  
Very detailed and informative, some of the best docs you will
EVER see.  Layouts and Pics included.

Assembly:

$10.00 Wave soldered and tested.

The purpose is NOT to make profit, but to encourage interest in
this area.


All Shipping included.

Checks to:

Gregory W. Ratcliff
1763 Hess Blvd.
Columbus, Ohio 43212
Voice and Occasional FAX(614) 487-0695 
eves till midnight EST

-- 
Gregory W. Ratcliff  Ratcliff.8@osu.edu  on the internet   
Columbus, Ohio     ICBM
nz8r@w8cqk 	 on the air
N1697X     	 in the air
