Newsgroups: comp.lang.smalltalk
Path: cantaloupe.srv.cs.cmu.edu!rochester!cornellcs!travelers.mail.cornell.edu!news.kei.com!news.mathworks.com!newsxfer.itd.umich.edu!agate!howland.reston.ans.net!news.sprintlink.net!dispatch.news.demon.net!demon!sunsite.doc.ic.ac.uk!susx.ac.uk!news.bton.ac.uk!Simon.Shurville
From: sjs16@uk.ac.bton.itri (Simon Shurville)
Subject: Re: Stripper in VW2.0 for power PC help
X-Nntp-Posting-Host: tomcat.itri.bton.ac.uk
Message-ID: <DEw259.J1u@bton.ac.uk>
X-Posted-From: InterNews 1.0@diamond.bton.ac.uk.
Lines: 37
Sender: -Not-Authenticated-[3206]
Organization: University of Brighton, UK
References: <DEuCK5.5Jn@bton.ac.uk>  
 <NEWTNews.811062098.12859.Boyland@tboyland-s1.atlanta.com>
Date: Thu, 14 Sep 1995 09:24:44 GMT
Xdisclaimer: No attempt was made to authenticate the sender's name.

In article <NEWTNews.811062098.12859.Boyland@tboyland-s1.atlanta.com>
T Boyland <Boyland@atlanta.com> writes:

> In Article<DEuCK5.5Jn@bton.ac.uk>, <sjs16@uk.ac.bton.itri> write:
> > Newsgroups: comp.lang.smalltalk
> > Path: 
> nntp.atlanta.com!metro.atlanta.com!spcuna!uunet!in2.uu.net!tank.news.pipex.net!
> pipex!sunsite.doc.ic.ac.uk!susx.ac.uk!news.bton.ac.uk!Simon.Shurville
> > From: sjs16@uk.ac.bton.itri (Simon Shurville)
> > Subject: Stripper in VW2.0 for power PC help
> > I followed the instructions on page 165 of the PP user's guide and I am
> > told that the stripper does not exist (would I like to declare it? No
> > I'f like PP to have delared it!). Can anyone tell me how to load th
> > blasted thing on a Power PC?
> 
> Sounds like you overlooked the filein from the utils directory.
> 
> Filein "stripper.st", <then> execute: Stripper open.

Thanks for your help! 

I realise that now: parc place sent me some rather terse mail on the
sublect. I wish that, given the length of the VW documentation, they
could have ammended the line:


The Stripper code is located in an auxilary code file in the utils
directory-file in Stripper.st

to 

The Stripper code is located in an auxilary code file in the utils
directory. *So* file in Stripper.st

or

The Stripper code is located in an auxilary code file in the utils
directory. *You will* need to file in Stripper.st.

Other than that I've found the documentation quite good.
