Newsgroups: comp.robotics,comp.ai
Path: cantaloupe.srv.cs.cmu.edu!das-news2.harvard.edu!news2.near.net!howland.reston.ans.net!spool.mu.edu!torn!watserv2.uwaterloo.ca!rene
From: rene@watnow.uwaterloo.ca (Rene V. Mayorga)
Subject: 1995 IASTED Int. Conf. on Robotics and Manufacturing
Message-ID: <D14Bz3.LF2@watserv2.uwaterloo.ca>
Sender: news@watserv2.uwaterloo.ca
Nntp-Posting-Host: watnow.uwaterloo.ca
Organization: University of Waterloo
Date: Tue, 20 Dec 1994 16:47:26 GMT
Lines: 141
Xref: glinda.oz.cs.cmu.edu comp.robotics:16447 comp.ai:25996


3rd IASTED International Conference on Robotics and Manufacturing

Cancun, Mexico, June 14 - 17, 1995
Sheraton Hotel


In Cooperation with:

ITESM
Instituto Tecnologico y de Estudios Superiores de Monterrey, Mexico


General Chair
T. C. (Steve) Hsia, University of California, Davis


Program Chair
Rene V. Mayorga, University of Waterloo, Canada


Regional Program Chairs
Francisco Cantu-Ortiz, ITESM, Monterrey
Juan Frausto-Solis, ITESM, Morelos


International Program Committee

S. Arimoto, University of Tokyo, Japan,
E. Bayo, University of California, Santa Barbara, USA,
P. Dario, University of Pisa, Italy,
C. Doumanidis, Tufts University, USA,
A. Desrochers, Rensselaer Polytechnic, USA
R. V. Dubey, University of Tennessee, USA,
W. H. ElMaraghy, University of Windsor, Canada,
B. Espiau, INRIA, France,
T. Fukuda, Nagoya University, Japan,
H. Furuta, Tokyo Inst. of Tech., Japan,
A. Gomes, EPUSP, Brazil,
A. Goldenberg, University of Toronto, Canada,
W. A. Gruver, Simon Fraser University, Canada,
S. Kalaycioglu, Canadian Space Agency,
O. Khatib, Standord University, USA,
H. N. Koivo, Tampere University, Finland,
K. Kosuge, University of Nagoya, Japan,
F. Lobo-Pereira, Porto University, Portugal,
A. Maciejewski, Purdue University, USA,
H. Miura, University of Tokyo, Japan,
Y. Nakamura, University of Tokyo, Japan,
G. Saridis, Rensselaer Polytechnic, USA
H. Seraji, JPL, USA,
Y. Shirai, Osaka University, Japan
J. E. Slotine, MIT, USA,
A. C. Sanderson, Rensselaer Polytechnic, USA
B. Siciliano, University of Naples, Italy,
P. M. Taylor, University of Hull, U.K.,
S. Tsuji, Osaka University, Japan
A. K. C. Wong, University of Waterloo, Canada


Regional Program Committee

J. L. Gordillo, ITESM, Monterrey,
R. Kelly, CICESE, Ensenada,
J. M. Ibarra, CINVESTAV,
H. Martinez, ITESM, Monterrey,
A. Pamanes, Laguna Tec, Torreon,
A. Ramirez, CINVESTAV,
F. Ramos, ITESM, Morelos,
G. Rodriguez, I.E.E., Cuernavaca,
J. M. Sanchez, ITESM, Monterrey,
R. Soto, ITESM, Monterrey,
L. E. Sucar, ITESM, Morelos,
M. Valenzuela, ITESM, Monterrey,


Scope:

Adaptive Control
AI Techniques
Architectures
Autonomous Systems
Bionics/Biomechanics
Design Automation
Expert Systems
Flexible Manufacturing Systems
Fuzzy Control
Human/Machine Interface
Industrial Automation
Industrial Robots
Intelligent/Self-organizing Systems
Knowledge-Based Systems
Learning/Reasoning Systems
Manufacturing Systems
Mechatronics
Microrobotics
Mobile Robots
Motion Planning
Modelling
Multirobot Systems
Neural Networks
Process Control
Reliability/Safety/Stability
Robot Dynamics
Robot Control
Robot Kinematics
Robot Mechanisms
Robust Control
Scheduling
Sensors
Sensor Data Fusion
Simulation
Space Robotics
Teleoperation
Virtual Reality


Three copies of the papers (maximum 12 double-spaced pages, including 
figures, for regular papers; and maximum six double spaced pages for
short papers) should be received by Feb. 15, 1995. Please provide four
key words to indicate the area of the article. Also, include a statement
in your cover letter confirming that if the paper is accepted, one of the
authors will attend the conference to present it. Please give full name,
affiliation, full address, telephone and fax numbers, and email address
if available.


Please submit papers to

Rene V. Mayorga,
Dept. of Systems Design Eng.,
University of Waterloo,
Waterloo, Ontario, N2L 3G1

Tel: (519) 885-1211, Ext. 2604,
Fax: (519) 746-4791
email: rmayorga@watserv1.uwaterloo.ca


Notification of acceptance and author kits will be mailed by March 15, 1995.
The final manuscripts and registration payment are due prior to May 1, 1995.
