Newsgroups: comp.ai.neural-nets
Path: cantaloupe.srv.cs.cmu.edu!rochester!udel!news.mathworks.com!uunet!in1.uu.net!newsflash.concordia.ca!news.mcgill.ca!clouso.crim.ca!uqac.uquebec.ca!usenet
From: tp4@uquac.uquebec.ca
Subject: Re: SNNS & RS6000
Message-ID: <D9rIp5.DBI@uqac.uquebec.ca>
Sender: usenet@uqac.uquebec.ca
Nntp-Posting-Host: ps2-04
Organization: Universite du Quebec a Chicoutimi
References: <95132.095616FUGANTI@vm.uni-bocconi.it> <3qn7gu$bpn@feenix.metronet.com>
Date: Tue, 6 Jun 1995 17:46:17 GMT
Lines: 64

brit@metronet.com (Brit Systems) wrote:
>
> Can't tell for sure but I'd bet that you have X11R4 on that machine,
> you probably need to install X11R5.
> 
> run "lslpp -l X11rte.obj"
> I get this:
>   Name                  State         Description
>   --------------------  ------------  ---------------------------------------
> Path: /usr/lib/objrepos
>   X11rte.obj 01.02.03.00
>                         COMMITTED     AIXwindows Run Time Environment
> and it is R5.
> 
> see ya,
> Robbie Barton
> 
> FUGANTI@vm.uni-bocconi.it wrote:
> : I've got a problem compiling SNNS on a IBM risc 6000 in my University.
> : The kernel compiles just fine, but with xgui I got this error message:
> 
> : ---
> : Building XGUI ...
> : Compiling ...
> :         cc -o xgui libxgui1.a libxgui2.a lib3d.a /usr/local/SNNSv3.3/kernel/bin
> : ibm_aix/libkernel.a  /usr/local/SNNSv3.3/kernel/bin/ibm_aix/libfunc.a -L/usr/lp
> : /X11/lib -lXaw -lXmu -lXt -lXext -lX11 -lm -ll
> : 0706-317 ERROR: Unresolved or undefined symbols detected:
> :                  Symbols in error (followed by references) are
> :                  dumped to the load map.
> :                  The -bloadmap:<filename> option will create a load map.
> : XtStrings
> : XtShellStrings
> : .XrmPermStringToQuark
> : .XtGetActionList
> : .XrmGetDatabase
> : .XtScreenDatabase
> : .XrmSetDatabase
> : The error code from the last failed command is 8.
> : Make Quitting.
> : ---
> : I think that I don't have all the library I need, but I'm not so an
> : experienced programmer to understand what I'm missing.
> 
> : The machine is an IBM risc 6000 model 250, 64Mb of RAM and 1Gb HD, running AIX
> : 3.2.2
> 
> : If someone can help me, I would apreciate very much!
> 
> : BTW at home, on a Pentium 90 Machine running Linux with X11R6 everything works
> : just fine!
> 
> : TIA,
> :   Giovanni
> : ---
> : Giovanni Fuganti
> : Centro di Calcolo - Universita' Comm. L. Bocconi - Milano
> : fuganti@vm.uni-bocconi.it
> 
> --
> BRIT Systems, Medical Imaging
> 3626 N. Hall Street, Suite 616, Dallas, TX 75219
> (214) 528-4446 fax: (214) 528-4916

